diff options
Diffstat (limited to 'drivers/clk')
| -rw-r--r-- | drivers/clk/clk-uclass.c | 6 | ||||
| -rw-r--r-- | drivers/clk/clk_stm32mp1.c | 1 | ||||
| -rw-r--r-- | drivers/clk/uniphier/clk-uniphier-sys.c | 3 |
3 files changed, 9 insertions, 1 deletions
diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c index f049e36380..cea38a4c6e 100644 --- a/drivers/clk/clk-uclass.c +++ b/drivers/clk/clk-uclass.c @@ -847,13 +847,17 @@ void devm_clk_put(struct udevice *dev, struct clk *clk) int clk_uclass_post_probe(struct udevice *dev) { + int ret; + /* * when a clock provider is probed. Call clk_set_defaults() * also after the device is probed. This takes care of cases * where the DT is used to setup default parents and rates * using assigned-clocks */ - clk_set_defaults(dev, CLK_DEFAULTS_POST); + ret = clk_set_defaults(dev, CLK_DEFAULTS_POST); + if (ret) + return log_ret(ret); return 0; } diff --git a/drivers/clk/clk_stm32mp1.c b/drivers/clk/clk_stm32mp1.c index 0c0ef366a1..48c9514ba0 100644 --- a/drivers/clk/clk_stm32mp1.c +++ b/drivers/clk/clk_stm32mp1.c @@ -540,6 +540,7 @@ static const struct stm32mp1_clk_gate stm32mp1_clk_gate[] = { STM32MP1_CLK_SET_CLR(RCC_MP_APB2ENSETR, 13, USART6_K, _UART6_SEL), STM32MP1_CLK_SET_CLR_F(RCC_MP_APB3ENSETR, 13, VREF, _PCLK3), + STM32MP1_CLK_SET_CLR_F(RCC_MP_APB3ENSETR, 11, SYSCFG, _UNKNOWN_SEL), STM32MP1_CLK_SET_CLR_F(RCC_MP_APB4ENSETR, 0, LTDC_PX, _PLL4_Q), STM32MP1_CLK_SET_CLR_F(RCC_MP_APB4ENSETR, 4, DSI_PX, _PLL4_Q), diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c index c627a4bf85..ff5d364f59 100644 --- a/drivers/clk/uniphier/clk-uniphier-sys.c +++ b/drivers/clk/uniphier/clk-uniphier-sys.c @@ -29,6 +29,7 @@ const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = { UNIPHIER_CLK_GATE_SIMPLE(15, 0x2104, 17), /* usb31 (Pro4, Pro5, PXs2) */ UNIPHIER_CLK_GATE_SIMPLE(16, 0x2104, 19), /* usb30-phy (PXs2) */ UNIPHIER_CLK_GATE_SIMPLE(20, 0x2104, 20), /* usb31-phy (PXs2) */ + UNIPHIER_CLK_GATE_SIMPLE(24, 0x2108, 2), /* pcie (Pro5) */ { /* sentinel */ } #endif }; @@ -43,6 +44,7 @@ const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = { UNIPHIER_CLK_GATE_SIMPLE(14, 0x210c, 14), /* usb30 (LD20) */ UNIPHIER_CLK_GATE_SIMPLE(16, 0x210c, 12), /* usb30-phy0 (LD20) */ UNIPHIER_CLK_GATE_SIMPLE(17, 0x210c, 13), /* usb30-phy1 (LD20) */ + UNIPHIER_CLK_GATE_SIMPLE(24, 0x210c, 4), /* pcie */ { /* sentinel */ } #endif }; @@ -62,6 +64,7 @@ const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = { UNIPHIER_CLK_GATE_SIMPLE(18, 0x210c, 20), /* usb30-phy2 */ UNIPHIER_CLK_GATE_SIMPLE(20, 0x210c, 17), /* usb31-phy0 */ UNIPHIER_CLK_GATE_SIMPLE(21, 0x210c, 19), /* usb31-phy1 */ + UNIPHIER_CLK_GATE_SIMPLE(24, 0x210c, 3), /* pcie */ { /* sentinel */ } #endif }; |