summaryrefslogtreecommitdiff
path: root/drivers/ddr/fsl/main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ddr/fsl/main.c')
-rw-r--r--drivers/ddr/fsl/main.c244
1 files changed, 164 insertions, 80 deletions
diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c
index 5e001fcb99..b43b669e41 100644
--- a/drivers/ddr/fsl/main.c
+++ b/drivers/ddr/fsl/main.c
@@ -135,7 +135,7 @@ __attribute__((weak, alias("__get_spd")))
void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address);
void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
- unsigned int ctrl_num)
+ unsigned int ctrl_num, unsigned int dimm_slots_per_ctrl)
{
unsigned int i;
unsigned int i2c_address = 0;
@@ -145,14 +145,14 @@ void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
return;
}
- for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
+ for (i = 0; i < dimm_slots_per_ctrl; i++) {
i2c_address = spd_i2c_addr[ctrl_num][i];
get_spd(&(ctrl_dimms_spd[i]), i2c_address);
}
}
#else
void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
- unsigned int ctrl_num)
+ unsigned int ctrl_num, unsigned int dimm_slots_per_ctrl)
{
}
#endif /* SPD_EEPROM_ADDRESSx */
@@ -231,9 +231,11 @@ const char * step_to_string(unsigned int step) {
static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo,
unsigned int dbw_cap_adj[])
{
- int i, j;
+ unsigned int i, j;
unsigned long long total_mem, current_mem_base, total_ctlr_mem;
unsigned long long rank_density, ctlr_density = 0;
+ unsigned int first_ctrl = pinfo->first_ctrl;
+ unsigned int last_ctrl = first_ctrl + pinfo->num_ctrls - 1;
/*
* If a reduced data width is requested, but the SPD
@@ -241,7 +243,7 @@ static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo,
* computed dimm capacities accordingly before
* assigning addresses.
*/
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (i = first_ctrl; i <= last_ctrl; i++) {
unsigned int found = 0;
switch (pinfo->memctl_opts[i].data_bus_width) {
@@ -295,12 +297,12 @@ static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo,
debug("dbw_cap_adj[%d]=%d\n", i, dbw_cap_adj[i]);
}
- current_mem_base = CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY;
+ current_mem_base = pinfo->mem_base;
total_mem = 0;
- if (pinfo->memctl_opts[0].memctl_interleaving) {
- rank_density = pinfo->dimm_params[0][0].rank_density >>
- dbw_cap_adj[0];
- switch (pinfo->memctl_opts[0].ba_intlv_ctl &
+ if (pinfo->memctl_opts[first_ctrl].memctl_interleaving) {
+ rank_density = pinfo->dimm_params[first_ctrl][0].rank_density >>
+ dbw_cap_adj[first_ctrl];
+ switch (pinfo->memctl_opts[first_ctrl].ba_intlv_ctl &
FSL_DDR_CS0_CS1_CS2_CS3) {
case FSL_DDR_CS0_CS1_CS2_CS3:
ctlr_density = 4 * rank_density;
@@ -316,7 +318,7 @@ static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo,
}
debug("rank density is 0x%llx, ctlr density is 0x%llx\n",
rank_density, ctlr_density);
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (i = first_ctrl; i <= last_ctrl; i++) {
if (pinfo->memctl_opts[i].memctl_interleaving) {
switch (pinfo->memctl_opts[i].memctl_interleaving_mode) {
case FSL_DDR_256B_INTERLEAVING:
@@ -372,7 +374,7 @@ static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo,
* Simple linear assignment if memory
* controllers are not interleaved.
*/
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (i = first_ctrl; i <= last_ctrl; i++) {
total_ctlr_mem = 0;
pinfo->common_timing_params[i].base_address =
current_mem_base;
@@ -408,18 +410,23 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
{
unsigned int i, j;
unsigned long long total_mem = 0;
- int assert_reset;
+ int assert_reset = 0;
+ unsigned int first_ctrl = pinfo->first_ctrl;
+ unsigned int last_ctrl = first_ctrl + pinfo->num_ctrls - 1;
+ __maybe_unused int retval;
+ __maybe_unused bool goodspd = false;
+ __maybe_unused int dimm_slots_per_ctrl = pinfo->dimm_slots_per_ctrl;
fsl_ddr_cfg_regs_t *ddr_reg = pinfo->fsl_ddr_config_reg;
common_timing_params_t *timing_params = pinfo->common_timing_params;
- assert_reset = board_need_mem_reset();
+ if (pinfo->board_need_mem_reset)
+ assert_reset = pinfo->board_need_mem_reset();
/* data bus width capacity adjust shift amount */
unsigned int dbw_capacity_adjust[CONFIG_NUM_DDR_CONTROLLERS];
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (i = first_ctrl; i <= last_ctrl; i++)
dbw_capacity_adjust[i] = 0;
- }
debug("starting at step %u (%s)\n",
start_step, step_to_string(start_step));
@@ -428,28 +435,28 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
case STEP_GET_SPD:
#if defined(CONFIG_DDR_SPD) || defined(CONFIG_SPD_EEPROM)
/* STEP 1: Gather all DIMM SPD data */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- fsl_ddr_get_spd(pinfo->spd_installed_dimms[i], i);
+ for (i = first_ctrl; i <= last_ctrl; i++) {
+ fsl_ddr_get_spd(pinfo->spd_installed_dimms[i], i,
+ dimm_slots_per_ctrl);
}
case STEP_COMPUTE_DIMM_PARMS:
/* STEP 2: Compute DIMM parameters from SPD data */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (i = first_ctrl; i <= last_ctrl; i++) {
for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- unsigned int retval;
generic_spd_eeprom_t *spd =
&(pinfo->spd_installed_dimms[i][j]);
dimm_params_t *pdimm =
&(pinfo->dimm_params[i][j]);
-
retval = compute_dimm_parameters(spd, pdimm, i);
#ifdef CONFIG_SYS_DDR_RAW_TIMING
if (!i && !j && retval) {
printf("SPD error on controller %d! "
"Trying fallback to raw timing "
"calculation\n", i);
- fsl_ddr_get_dimm_params(pdimm, i, j);
+ retval = fsl_ddr_get_dimm_params(pdimm,
+ i, j);
}
#else
if (retval == 2) {
@@ -463,13 +470,26 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
debug("Warning: compute_dimm_parameters"
" non-zero return value for memctl=%u "
"dimm=%u\n", i, j);
+ } else {
+ goodspd = true;
}
}
}
+ if (!goodspd) {
+ /*
+ * No valid SPD found
+ * Throw an error if this is for main memory, i.e.
+ * first_ctrl == 0. Otherwise, siliently return 0
+ * as the memory size.
+ */
+ if (first_ctrl == 0)
+ printf("Error: No valid SPD detected.\n");
+ return 0;
+ }
#elif defined(CONFIG_SYS_DDR_RAW_TIMING)
case STEP_COMPUTE_DIMM_PARMS:
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (i = first_ctrl; i <= last_ctrl; i++) {
for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
dimm_params_t *pdimm =
&(pinfo->dimm_params[i][j]);
@@ -483,7 +503,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
* STEP 3: Compute a common set of timing parameters
* suitable for all of the DIMMs on each memory controller
*/
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (i = first_ctrl; i <= last_ctrl; i++) {
debug("Computing lowest common DIMM"
" parameters for memctl=%u\n", i);
compute_lowest_common_dimm_parameters(
@@ -494,7 +514,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
case STEP_GATHER_OPTS:
/* STEP 4: Gather configuration requirements from user */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (i = first_ctrl; i <= last_ctrl; i++) {
debug("Reloading memory controller "
"configuration options for memctl=%u\n", i);
/*
@@ -516,9 +536,13 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
if (timing_params[i].all_dimms_registered)
assert_reset = 1;
}
- if (assert_reset) {
- debug("Asserting mem reset\n");
- board_assert_mem_reset();
+ if (assert_reset && !size_only) {
+ if (pinfo->board_mem_reset) {
+ debug("Asserting mem reset\n");
+ pinfo->board_mem_reset();
+ } else {
+ debug("Asserting mem reset missing\n");
+ }
}
case STEP_ASSIGN_ADDRESSES:
@@ -530,7 +554,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
case STEP_COMPUTE_REGS:
/* STEP 6: compute controller register values */
debug("FSL Memory ctrl register computation\n");
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (i = first_ctrl; i <= last_ctrl; i++) {
if (timing_params[i].ndimms_present == 0) {
memset(&ddr_reg[i], 0,
sizeof(fsl_ddr_cfg_regs_t));
@@ -558,7 +582,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
*/
unsigned int max_end = 0;
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (i = first_ctrl; i <= last_ctrl; i++) {
for (j = 0; j < CONFIG_CHIP_SELECTS_PER_CTRL; j++) {
fsl_ddr_cfg_regs_t *reg = &ddr_reg[i];
if (reg->cs[j].config & 0x80000000) {
@@ -578,53 +602,45 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
}
total_mem = 1 + (((unsigned long long)max_end << 24ULL) |
- 0xFFFFFFULL) - CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY;
+ 0xFFFFFFULL) - pinfo->mem_base;
}
return total_mem;
}
-/*
- * fsl_ddr_sdram() -- this is the main function to be called by
- * initdram() in the board file.
- *
- * It returns amount of memory configured in bytes.
- */
-phys_size_t fsl_ddr_sdram(void)
+phys_size_t __fsl_ddr_sdram(fsl_ddr_info_t *pinfo)
{
- unsigned int i;
+ unsigned int i, first_ctrl, last_ctrl;
#ifdef CONFIG_PPC
unsigned int law_memctl = LAW_TRGT_IF_DDR_1;
#endif
unsigned long long total_memory;
- fsl_ddr_info_t info;
- int deassert_reset;
+ int deassert_reset = 0;
- /* Reset info structure. */
- memset(&info, 0, sizeof(fsl_ddr_info_t));
+ first_ctrl = pinfo->first_ctrl;
+ last_ctrl = first_ctrl + pinfo->num_ctrls - 1;
/* Compute it once normally. */
#ifdef CONFIG_FSL_DDR_INTERACTIVE
if (tstc() && (getc() == 'd')) { /* we got a key press of 'd' */
- total_memory = fsl_ddr_interactive(&info, 0);
+ total_memory = fsl_ddr_interactive(pinfo, 0);
} else if (fsl_ddr_interactive_env_var_exists()) {
- total_memory = fsl_ddr_interactive(&info, 1);
+ total_memory = fsl_ddr_interactive(pinfo, 1);
} else
#endif
- total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0);
+ total_memory = fsl_ddr_compute(pinfo, STEP_GET_SPD, 0);
/* setup 3-way interleaving before enabling DDRC */
- if (info.memctl_opts[0].memctl_interleaving) {
- switch (info.memctl_opts[0].memctl_interleaving_mode) {
- case FSL_DDR_3WAY_1KB_INTERLEAVING:
- case FSL_DDR_3WAY_4KB_INTERLEAVING:
- case FSL_DDR_3WAY_8KB_INTERLEAVING:
- fsl_ddr_set_intl3r(
- info.memctl_opts[0].memctl_interleaving_mode);
- break;
- default:
- break;
- }
+ switch (pinfo->memctl_opts[first_ctrl].memctl_interleaving_mode) {
+ case FSL_DDR_3WAY_1KB_INTERLEAVING:
+ case FSL_DDR_3WAY_4KB_INTERLEAVING:
+ case FSL_DDR_3WAY_8KB_INTERLEAVING:
+ fsl_ddr_set_intl3r(
+ pinfo->memctl_opts[first_ctrl].
+ memctl_interleaving_mode);
+ break;
+ default:
+ break;
}
/*
@@ -637,14 +653,15 @@ phys_size_t fsl_ddr_sdram(void)
* For non-registered DIMMs, initialization can go through but it is
* also OK to follow the same flow.
*/
- deassert_reset = board_need_mem_reset();
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (info.common_timing_params[i].all_dimms_registered)
+ if (pinfo->board_need_mem_reset)
+ deassert_reset = pinfo->board_need_mem_reset();
+ for (i = first_ctrl; i <= last_ctrl; i++) {
+ if (pinfo->common_timing_params[i].all_dimms_registered)
deassert_reset = 1;
}
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (i = first_ctrl; i <= last_ctrl; i++) {
debug("Programming controller %u\n", i);
- if (info.common_timing_params[i].ndimms_present == 0) {
+ if (pinfo->common_timing_params[i].ndimms_present == 0) {
debug("No dimms present on controller %u; "
"skipping programming\n", i);
continue;
@@ -653,45 +670,58 @@ phys_size_t fsl_ddr_sdram(void)
* The following call with step = 1 returns before enabling
* the controller. It has to finish with step = 2 later.
*/
- fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i,
+ fsl_ddr_set_memctl_regs(&(pinfo->fsl_ddr_config_reg[i]), i,
deassert_reset ? 1 : 0);
}
if (deassert_reset) {
/* Use board FPGA or GPIO to deassert reset signal */
- debug("Deasserting mem reset\n");
- board_deassert_mem_reset();
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ if (pinfo->board_mem_de_reset) {
+ debug("Deasserting mem reset\n");
+ pinfo->board_mem_de_reset();
+ } else {
+ debug("Deasserting mem reset missing\n");
+ }
+ for (i = first_ctrl; i <= last_ctrl; i++) {
/* Call with step = 2 to continue initialization */
- fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]),
+ fsl_ddr_set_memctl_regs(&(pinfo->fsl_ddr_config_reg[i]),
i, 2);
}
}
#ifdef CONFIG_PPC
/* program LAWs */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (info.memctl_opts[i].memctl_interleaving) {
- switch (info.memctl_opts[i].memctl_interleaving_mode) {
+ for (i = first_ctrl; i <= last_ctrl; i++) {
+ if (pinfo->memctl_opts[i].memctl_interleaving) {
+ switch (pinfo->memctl_opts[i].
+ memctl_interleaving_mode) {
case FSL_DDR_CACHE_LINE_INTERLEAVING:
case FSL_DDR_PAGE_INTERLEAVING:
case FSL_DDR_BANK_INTERLEAVING:
case FSL_DDR_SUPERBANK_INTERLEAVING:
+ if (i % 2)
+ break;
if (i == 0) {
law_memctl = LAW_TRGT_IF_DDR_INTRLV;
- fsl_ddr_set_lawbar(&info.common_timing_params[i],
+ fsl_ddr_set_lawbar(
+ &pinfo->common_timing_params[i],
law_memctl, i);
- } else if (i == 2) {
+ }
+#if CONFIG_NUM_DDR_CONTROLLERS > 3
+ else if (i == 2) {
law_memctl = LAW_TRGT_IF_DDR_INTLV_34;
- fsl_ddr_set_lawbar(&info.common_timing_params[i],
+ fsl_ddr_set_lawbar(
+ &pinfo->common_timing_params[i],
law_memctl, i);
}
+#endif
break;
case FSL_DDR_3WAY_1KB_INTERLEAVING:
case FSL_DDR_3WAY_4KB_INTERLEAVING:
case FSL_DDR_3WAY_8KB_INTERLEAVING:
law_memctl = LAW_TRGT_IF_DDR_INTLV_123;
if (i == 0) {
- fsl_ddr_set_lawbar(&info.common_timing_params[i],
+ fsl_ddr_set_lawbar(
+ &pinfo->common_timing_params[i],
law_memctl, i);
}
break;
@@ -700,7 +730,8 @@ phys_size_t fsl_ddr_sdram(void)
case FSL_DDR_4WAY_8KB_INTERLEAVING:
law_memctl = LAW_TRGT_IF_DDR_INTLV_1234;
if (i == 0)
- fsl_ddr_set_lawbar(&info.common_timing_params[i],
+ fsl_ddr_set_lawbar(
+ &pinfo->common_timing_params[i],
law_memctl, i);
/* place holder for future 4-way interleaving */
break;
@@ -724,8 +755,8 @@ phys_size_t fsl_ddr_sdram(void)
default:
break;
}
- fsl_ddr_set_lawbar(&info.common_timing_params[i],
- law_memctl, i);
+ fsl_ddr_set_lawbar(&pinfo->common_timing_params[i],
+ law_memctl, i);
}
}
#endif
@@ -734,7 +765,7 @@ phys_size_t fsl_ddr_sdram(void)
#if !defined(CONFIG_PHYS_64BIT)
/* Check for 4G or more. Bad. */
- if (total_memory >= (1ull << 32)) {
+ if ((first_ctrl == 0) && (total_memory >= (1ull << 32))) {
puts("Detected ");
print_size(total_memory, " of memory\n");
printf(" This U-Boot only supports < 4G of DDR\n");
@@ -748,8 +779,56 @@ phys_size_t fsl_ddr_sdram(void)
}
/*
- * fsl_ddr_sdram_size() - This function only returns the size of the total
- * memory without setting ddr control registers.
+ * fsl_ddr_sdram(void) -- this is the main function to be
+ * called by initdram() in the board file.
+ *
+ * It returns amount of memory configured in bytes.
+ */
+phys_size_t fsl_ddr_sdram(void)
+{
+ fsl_ddr_info_t info;
+
+ /* Reset info structure. */
+ memset(&info, 0, sizeof(fsl_ddr_info_t));
+ info.mem_base = CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY;
+ info.first_ctrl = 0;
+ info.num_ctrls = CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS;
+ info.dimm_slots_per_ctrl = CONFIG_DIMM_SLOTS_PER_CTLR;
+ info.board_need_mem_reset = board_need_mem_reset;
+ info.board_mem_reset = board_assert_mem_reset;
+ info.board_mem_de_reset = board_deassert_mem_reset;
+
+ return __fsl_ddr_sdram(&info);
+}
+
+#ifdef CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS
+phys_size_t fsl_other_ddr_sdram(unsigned long long base,
+ unsigned int first_ctrl,
+ unsigned int num_ctrls,
+ unsigned int dimm_slots_per_ctrl,
+ int (*board_need_reset)(void),
+ void (*board_reset)(void),
+ void (*board_de_reset)(void))
+{
+ fsl_ddr_info_t info;
+
+ /* Reset info structure. */
+ memset(&info, 0, sizeof(fsl_ddr_info_t));
+ info.mem_base = base;
+ info.first_ctrl = first_ctrl;
+ info.num_ctrls = num_ctrls;
+ info.dimm_slots_per_ctrl = dimm_slots_per_ctrl;
+ info.board_need_mem_reset = board_need_reset;
+ info.board_mem_reset = board_reset;
+ info.board_mem_de_reset = board_de_reset;
+
+ return __fsl_ddr_sdram(&info);
+}
+#endif
+
+/*
+ * fsl_ddr_sdram_size(first_ctrl, last_intlv) - This function only returns the
+ * size of the total memory without setting ddr control registers.
*/
phys_size_t
fsl_ddr_sdram_size(void)
@@ -758,6 +837,11 @@ fsl_ddr_sdram_size(void)
unsigned long long total_memory = 0;
memset(&info, 0 , sizeof(fsl_ddr_info_t));
+ info.mem_base = CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY;
+ info.first_ctrl = 0;
+ info.num_ctrls = CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS;
+ info.dimm_slots_per_ctrl = CONFIG_DIMM_SLOTS_PER_CTLR;
+ info.board_need_mem_reset = NULL;
/* Compute it once normally. */
total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 1);