diff options
Diffstat (limited to 'drivers/ddr/marvell/a38x/ddr_ml_wrapper.h')
| -rw-r--r-- | drivers/ddr/marvell/a38x/ddr_ml_wrapper.h | 148 |
1 files changed, 148 insertions, 0 deletions
diff --git a/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h b/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h new file mode 100644 index 0000000000..5bf3239921 --- /dev/null +++ b/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h @@ -0,0 +1,148 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + */ + +#ifndef _DDR_ML_WRAPPER_H +#define _DDR_ML_WRAPPER_H + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X) +#define INTER_REGS_BASE SOC_REGS_PHY_BASE +#endif + +/* + * MV_DEBUG_INIT need to be defines, otherwise the output of the + * DDR2 training code is not complete and misleading + */ +#define MV_DEBUG_INIT + +#ifdef MV_DEBUG_INIT +#define DEBUG_INIT_S(s) puts(s) +#define DEBUG_INIT_D(d, l) printf("%x", d) +#define DEBUG_INIT_D_10(d, l) printf("%d", d) +#else +#define DEBUG_INIT_S(s) +#define DEBUG_INIT_D(d, l) +#define DEBUG_INIT_D_10(d, l) +#endif + +#ifdef MV_DEBUG_INIT_FULL +#define DEBUG_INIT_FULL_S(s) puts(s) +#define DEBUG_INIT_FULL_D(d, l) printf("%x", d) +#define DEBUG_INIT_FULL_D_10(d, l) printf("%d", d) +#define DEBUG_WR_REG(reg, val) \ + { DEBUG_INIT_S("Write Reg: 0x"); DEBUG_INIT_D((reg), 8); \ + DEBUG_INIT_S("= "); DEBUG_INIT_D((val), 8); DEBUG_INIT_S("\n"); } +#define DEBUG_RD_REG(reg, val) \ + { DEBUG_INIT_S("Read Reg: 0x"); DEBUG_INIT_D((reg), 8); \ + DEBUG_INIT_S("= "); DEBUG_INIT_D((val), 8); DEBUG_INIT_S("\n"); } +#else +#define DEBUG_INIT_FULL_S(s) +#define DEBUG_INIT_FULL_D(d, l) +#define DEBUG_INIT_FULL_D_10(d, l) +#define DEBUG_WR_REG(reg, val) +#define DEBUG_RD_REG(reg, val) +#endif + +#define DEBUG_INIT_FULL_C(s, d, l) \ + { DEBUG_INIT_FULL_S(s); \ + DEBUG_INIT_FULL_D(d, l); \ + DEBUG_INIT_FULL_S("\n"); } +#define DEBUG_INIT_C(s, d, l) \ + { DEBUG_INIT_S(s); DEBUG_INIT_D(d, l); DEBUG_INIT_S("\n"); } + +/* + * Debug (Enable/Disable modules) and Error report + */ + +#ifdef BASIC_DEBUG +#define MV_DEBUG_WL +#define MV_DEBUG_RL +#define MV_DEBUG_DQS_RESULTS +#endif + +#ifdef FULL_DEBUG +#define MV_DEBUG_WL +#define MV_DEBUG_RL +#define MV_DEBUG_DQS + +#define MV_DEBUG_PBS +#define MV_DEBUG_DFS +#define MV_DEBUG_MAIN_FULL +#define MV_DEBUG_DFS_FULL +#define MV_DEBUG_DQS_FULL +#define MV_DEBUG_RL_FULL +#define MV_DEBUG_WL_FULL +#endif + + +/* The following is a list of Marvell status */ +#define MV_ERROR (-1) +#define MV_OK (0x00) /* Operation succeeded */ +#define MV_FAIL (0x01) /* Operation failed */ +#define MV_BAD_VALUE (0x02) /* Illegal value (general) */ +#define MV_OUT_OF_RANGE (0x03) /* The value is out of range */ +#define MV_BAD_PARAM (0x04) /* Illegal parameter in function called */ +#define MV_BAD_PTR (0x05) /* Illegal pointer value */ +#define MV_BAD_SIZE (0x06) /* Illegal size */ +#define MV_BAD_STATE (0x07) /* Illegal state of state machine */ +#define MV_SET_ERROR (0x08) /* Set operation failed */ +#define MV_GET_ERROR (0x09) /* Get operation failed */ +#define MV_CREATE_ERROR (0x0a) /* Fail while creating an item */ +#define MV_NOT_FOUND (0x0b) /* Item not found */ +#define MV_NO_MORE (0x0c) /* No more items found */ +#define MV_NO_SUCH (0x0d) /* No such item */ +#define MV_TIMEOUT (0x0e) /* Time Out */ +#define MV_NO_CHANGE (0x0f) /* Parameter(s) is already in this value */ +#define MV_NOT_SUPPORTED (0x10) /* This request is not support */ +#define MV_NOT_IMPLEMENTED (0x11) /* Request supported but not implemented*/ +#define MV_NOT_INITIALIZED (0x12) /* The item is not initialized */ +#define MV_NO_RESOURCE (0x13) /* Resource not available (memory ...) */ +#define MV_FULL (0x14) /* Item is full (Queue or table etc...) */ +#define MV_EMPTY (0x15) /* Item is empty (Queue or table etc...) */ +#define MV_INIT_ERROR (0x16) /* Error occured while INIT process */ +#define MV_HW_ERROR (0x17) /* Hardware error */ +#define MV_TX_ERROR (0x18) /* Transmit operation not succeeded */ +#define MV_RX_ERROR (0x19) /* Recieve operation not succeeded */ +#define MV_NOT_READY (0x1a) /* The other side is not ready yet */ +#define MV_ALREADY_EXIST (0x1b) /* Tried to create existing item */ +#define MV_OUT_OF_CPU_MEM (0x1c) /* Cpu memory allocation failed. */ +#define MV_NOT_STARTED (0x1d) /* Not started yet */ +#define MV_BUSY (0x1e) /* Item is busy. */ +#define MV_TERMINATE (0x1f) /* Item terminates it's work. */ +#define MV_NOT_ALIGNED (0x20) /* Wrong alignment */ +#define MV_NOT_ALLOWED (0x21) /* Operation NOT allowed */ +#define MV_WRITE_PROTECT (0x22) /* Write protected */ +#define MV_INVALID (int)(-1) + +/* + * Accessor functions for the registers + */ +static inline void reg_write(u32 addr, u32 val) +{ + writel(val, INTER_REGS_BASE + addr); +} + +static inline u32 reg_read(u32 addr) +{ + return readl(INTER_REGS_BASE + addr); +} + +static inline void reg_bit_set(u32 addr, u32 mask) +{ + setbits_le32(INTER_REGS_BASE + addr, mask); +} + +static inline void reg_bit_clr(u32 addr, u32 mask) +{ + clrbits_le32(INTER_REGS_BASE + addr, mask); +} + +#endif /* _DDR_ML_WRAPPER_H */ |