diff options
Diffstat (limited to 'drivers/pci/pcie_dw_common.h')
| -rw-r--r-- | drivers/pci/pcie_dw_common.h | 155 |
1 files changed, 155 insertions, 0 deletions
diff --git a/drivers/pci/pcie_dw_common.h b/drivers/pci/pcie_dw_common.h new file mode 100644 index 0000000000..6b701645af --- /dev/null +++ b/drivers/pci/pcie_dw_common.h @@ -0,0 +1,155 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2021 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Copyright (c) 2021 Rockchip, Inc. + * + * Copyright (C) 2018 Texas Instruments, Inc + */ + +#ifndef PCIE_DW_COMMON_H +#define PCIE_DW_COMMON_H + +#define DEFAULT_DBI_ATU_OFFSET (0x3 << 20) + +/* PCI DBICS registers */ +#define PCIE_LINK_STATUS_REG 0x80 +#define PCIE_LINK_STATUS_SPEED_OFF 16 +#define PCIE_LINK_STATUS_SPEED_MASK (0xf << PCIE_LINK_STATUS_SPEED_OFF) +#define PCIE_LINK_STATUS_WIDTH_OFF 20 +#define PCIE_LINK_STATUS_WIDTH_MASK (0xf << PCIE_LINK_STATUS_WIDTH_OFF) + +/* + * iATU Unroll-specific register definitions + * From 4.80 core version the address translation will be made by unroll. + * The registers are offset from atu_base + */ +#define PCIE_ATU_UNR_REGION_CTRL1 0x00 +#define PCIE_ATU_UNR_REGION_CTRL2 0x04 +#define PCIE_ATU_UNR_LOWER_BASE 0x08 +#define PCIE_ATU_UNR_UPPER_BASE 0x0c +#define PCIE_ATU_UNR_LIMIT 0x10 +#define PCIE_ATU_UNR_LOWER_TARGET 0x14 +#define PCIE_ATU_UNR_UPPER_TARGET 0x18 + +#define PCIE_ATU_REGION_INDEX1 (0x1 << 0) +#define PCIE_ATU_REGION_INDEX0 (0x0 << 0) +#define PCIE_ATU_TYPE_MEM (0x0 << 0) +#define PCIE_ATU_TYPE_IO (0x2 << 0) +#define PCIE_ATU_TYPE_CFG0 (0x4 << 0) +#define PCIE_ATU_TYPE_CFG1 (0x5 << 0) +#define PCIE_ATU_ENABLE (0x1 << 31) +#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30) +#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24) +#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19) +#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) + +/* Register address builder */ +#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) ((region) << 9) + +/* Parameters for the waiting for iATU enabled routine */ +#define LINK_WAIT_MAX_IATU_RETRIES 5 +#define LINK_WAIT_IATU_US 10000 + +/* PCI DBICS registers */ +#define PCIE_LINK_STATUS_REG 0x80 +#define PCIE_LINK_STATUS_SPEED_OFF 16 +#define PCIE_LINK_STATUS_SPEED_MASK (0xf << PCIE_LINK_STATUS_SPEED_OFF) +#define PCIE_LINK_STATUS_WIDTH_OFF 20 +#define PCIE_LINK_STATUS_WIDTH_MASK (0xf << PCIE_LINK_STATUS_WIDTH_OFF) + +#define PCIE_LINK_CAPABILITY 0x7c +#define PCIE_LINK_CTL_2 0xa0 +#define TARGET_LINK_SPEED_MASK 0xf +#define LINK_SPEED_GEN_1 0x1 +#define LINK_SPEED_GEN_2 0x2 +#define LINK_SPEED_GEN_3 0x3 + +/* Synopsys-specific PCIe configuration registers */ +#define PCIE_PORT_LINK_CONTROL 0x710 +#define PORT_LINK_DLL_LINK_EN BIT(5) +#define PORT_LINK_FAST_LINK_MODE BIT(7) +#define PORT_LINK_MODE_MASK GENMASK(21, 16) +#define PORT_LINK_MODE(n) FIELD_PREP(PORT_LINK_MODE_MASK, n) +#define PORT_LINK_MODE_1_LANES PORT_LINK_MODE(0x1) +#define PORT_LINK_MODE_2_LANES PORT_LINK_MODE(0x3) +#define PORT_LINK_MODE_4_LANES PORT_LINK_MODE(0x7) +#define PORT_LINK_MODE_8_LANES PORT_LINK_MODE(0xf) + +#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C +#define PORT_LOGIC_N_FTS_MASK GENMASK(7, 0) +#define PORT_LOGIC_SPEED_CHANGE BIT(17) +#define PORT_LOGIC_LINK_WIDTH_MASK GENMASK(12, 8) +#define PORT_LOGIC_LINK_WIDTH(n) FIELD_PREP(PORT_LOGIC_LINK_WIDTH_MASK, n) +#define PORT_LOGIC_LINK_WIDTH_1_LANES PORT_LOGIC_LINK_WIDTH(0x1) +#define PORT_LOGIC_LINK_WIDTH_2_LANES PORT_LOGIC_LINK_WIDTH(0x2) +#define PORT_LOGIC_LINK_WIDTH_4_LANES PORT_LOGIC_LINK_WIDTH(0x4) +#define PORT_LOGIC_LINK_WIDTH_8_LANES PORT_LOGIC_LINK_WIDTH(0x8) + +#define PCIE_MISC_CONTROL_1_OFF 0x8bc +#define PCIE_DBI_RO_WR_EN BIT(0) + +/* Parameters for the waiting for iATU enabled routine */ +#define LINK_WAIT_MAX_IATU_RETRIES 5 +#define LINK_WAIT_IATU 10000 + +/** + * struct pcie_dw - DW PCIe controller state + * + * @dbi_base: The base address of dbi register space + * @cfg_base: The base address of configuration space + * @atu_base: The base address of ATU space + * @cfg_size: The size of the configuration space which is needed + * as it gets written into the PCIE_ATU_LIMIT register + * @first_busno: This driver supports multiple PCIe controllers. + * first_busno stores the bus number of the PCIe root-port + * number which may vary depending on the PCIe setup + * (PEX switches etc). + * @io: The IO space for EP's BAR + * @mem: The memory space for EP's BAR + * @prefetch: The prefetch space for EP's BAR + */ +struct pcie_dw { + struct udevice *dev; + void __iomem *dbi_base; + void __iomem *cfg_base; + void __iomem *atu_base; + fdt_size_t cfg_size; + + int first_busno; + + /* IO, MEM & PREFETCH PCI regions */ + struct pci_region io; + struct pci_region mem; + struct pci_region prefetch; +}; + +int pcie_dw_get_link_speed(struct pcie_dw *pci); + +int pcie_dw_get_link_width(struct pcie_dw *pci); + +int pcie_dw_prog_outbound_atu_unroll(struct pcie_dw *pci, int index, int type, u64 cpu_addr, + u64 pci_addr, u32 size); + +int pcie_dw_read_config(const struct udevice *bus, pci_dev_t bdf, uint offset, ulong *valuep, + enum pci_size_t size); + +int pcie_dw_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, ulong value, + enum pci_size_t size); + +static inline void dw_pcie_dbi_write_enable(struct pcie_dw *pci, bool en) +{ + u32 val; + + val = readl(pci->dbi_base + PCIE_MISC_CONTROL_1_OFF); + if (en) + val |= PCIE_DBI_RO_WR_EN; + else + val &= ~PCIE_DBI_RO_WR_EN; + writel(val, pci->dbi_base + PCIE_MISC_CONTROL_1_OFF); +} + +void pcie_dw_setup_host(struct pcie_dw *pci); + +#endif |