diff options
Diffstat (limited to 'drivers/serial/serial_s5p.c')
| -rw-r--r-- | drivers/serial/serial_s5p.c | 104 |
1 files changed, 82 insertions, 22 deletions
diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c index 6d09952a5d..53a7b0bd1b 100644 --- a/drivers/serial/serial_s5p.c +++ b/drivers/serial/serial_s5p.c @@ -14,24 +14,45 @@ #include <asm/global_data.h> #include <linux/compiler.h> #include <asm/io.h> +#if !CONFIG_IS_ENABLED(ARCH_APPLE) #include <asm/arch/clk.h> +#endif #include <asm/arch/uart.h> #include <serial.h> #include <clk.h> DECLARE_GLOBAL_DATA_PTR; -#define RX_FIFO_COUNT_SHIFT 0 -#define RX_FIFO_COUNT_MASK (0xff << RX_FIFO_COUNT_SHIFT) -#define RX_FIFO_FULL (1 << 8) -#define TX_FIFO_COUNT_SHIFT 16 -#define TX_FIFO_COUNT_MASK (0xff << TX_FIFO_COUNT_SHIFT) -#define TX_FIFO_FULL (1 << 24) +enum { + PORT_S5P = 0, + PORT_S5L +}; + +#define S5L_RX_FIFO_COUNT_SHIFT 0 +#define S5L_RX_FIFO_COUNT_MASK (0xf << S5L_RX_FIFO_COUNT_SHIFT) +#define S5L_RX_FIFO_FULL (1 << 8) +#define S5L_TX_FIFO_COUNT_SHIFT 4 +#define S5L_TX_FIFO_COUNT_MASK (0xf << S5L_TX_FIFO_COUNT_SHIFT) +#define S5L_TX_FIFO_FULL (1 << 9) + +#define S5P_RX_FIFO_COUNT_SHIFT 0 +#define S5P_RX_FIFO_COUNT_MASK (0xff << S5P_RX_FIFO_COUNT_SHIFT) +#define S5P_RX_FIFO_FULL (1 << 8) +#define S5P_TX_FIFO_COUNT_SHIFT 16 +#define S5P_TX_FIFO_COUNT_MASK (0xff << S5P_TX_FIFO_COUNT_SHIFT) +#define S5P_TX_FIFO_FULL (1 << 24) /* Information about a serial port */ struct s5p_serial_plat { struct s5p_uart *reg; /* address of registers in physical memory */ + u8 reg_width; /* register width */ u8 port_id; /* uart port number */ + u8 rx_fifo_count_shift; + u8 tx_fifo_count_shift; + u32 rx_fifo_count_mask; + u32 tx_fifo_count_mask; + u32 rx_fifo_full; + u32 tx_fifo_full; }; /* @@ -71,8 +92,8 @@ static void __maybe_unused s5p_serial_init(struct s5p_uart *uart) writel(0x245, &uart->ucon); } -static void __maybe_unused s5p_serial_baud(struct s5p_uart *uart, uint uclk, - int baudrate) +static void __maybe_unused s5p_serial_baud(struct s5p_uart *uart, u8 reg_width, + uint uclk, int baudrate) { u32 val; @@ -82,6 +103,8 @@ static void __maybe_unused s5p_serial_baud(struct s5p_uart *uart, uint uclk, if (s5p_uart_divslot()) writew(udivslot[val % 16], &uart->rest.slot); + else if (reg_width == 4) + writel(val % 16, &uart->rest.value); else writeb(val % 16, &uart->rest.value); } @@ -93,7 +116,7 @@ int s5p_serial_setbrg(struct udevice *dev, int baudrate) struct s5p_uart *const uart = plat->reg; u32 uclk; -#ifdef CONFIG_CLK_EXYNOS +#if CONFIG_IS_ENABLED(CLK_EXYNOS) || CONFIG_IS_ENABLED(ARCH_APPLE) struct clk clk; u32 ret; @@ -105,7 +128,7 @@ int s5p_serial_setbrg(struct udevice *dev, int baudrate) uclk = get_uart_clk(plat->port_id); #endif - s5p_serial_baud(uart, uclk, baudrate); + s5p_serial_baud(uart, plat->reg_width, uclk, baudrate); return 0; } @@ -144,11 +167,14 @@ static int s5p_serial_getc(struct udevice *dev) struct s5p_serial_plat *plat = dev_get_plat(dev); struct s5p_uart *const uart = plat->reg; - if (!(readl(&uart->ufstat) & RX_FIFO_COUNT_MASK)) + if (!(readl(&uart->ufstat) & plat->rx_fifo_count_mask)) return -EAGAIN; serial_err_check(uart, 0); - return (int)(readb(&uart->urxh) & 0xff); + if (plat->reg_width == 4) + return (int)(readl(&uart->urxh) & 0xff); + else + return (int)(readb(&uart->urxh) & 0xff); } static int s5p_serial_putc(struct udevice *dev, const char ch) @@ -156,10 +182,13 @@ static int s5p_serial_putc(struct udevice *dev, const char ch) struct s5p_serial_plat *plat = dev_get_plat(dev); struct s5p_uart *const uart = plat->reg; - if (readl(&uart->ufstat) & TX_FIFO_FULL) + if (readl(&uart->ufstat) & plat->tx_fifo_full) return -EAGAIN; - writeb(ch, &uart->utxh); + if (plat->reg_width == 4) + writel(ch, &uart->utxh); + else + writeb(ch, &uart->utxh); serial_err_check(uart, 1); return 0; @@ -171,15 +200,19 @@ static int s5p_serial_pending(struct udevice *dev, bool input) struct s5p_uart *const uart = plat->reg; uint32_t ufstat = readl(&uart->ufstat); - if (input) - return (ufstat & RX_FIFO_COUNT_MASK) >> RX_FIFO_COUNT_SHIFT; - else - return (ufstat & TX_FIFO_COUNT_MASK) >> TX_FIFO_COUNT_SHIFT; + if (input) { + return (ufstat & plat->rx_fifo_count_mask) >> + plat->rx_fifo_count_shift; + } else { + return (ufstat & plat->tx_fifo_count_mask) >> + plat->tx_fifo_count_shift; + } } static int s5p_serial_of_to_plat(struct udevice *dev) { struct s5p_serial_plat *plat = dev_get_plat(dev); + const ulong port_type = dev_get_driver_data(dev); fdt_addr_t addr; addr = dev_read_addr(dev); @@ -187,8 +220,26 @@ static int s5p_serial_of_to_plat(struct udevice *dev) return -EINVAL; plat->reg = (struct s5p_uart *)addr; + plat->reg_width = dev_read_u32_default(dev, "reg-io-width", 1); plat->port_id = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), "id", dev_seq(dev)); + + if (port_type == PORT_S5L) { + plat->rx_fifo_count_shift = S5L_RX_FIFO_COUNT_SHIFT; + plat->rx_fifo_count_mask = S5L_RX_FIFO_COUNT_MASK; + plat->rx_fifo_full = S5L_RX_FIFO_FULL; + plat->tx_fifo_count_shift = S5L_TX_FIFO_COUNT_SHIFT; + plat->tx_fifo_count_mask = S5L_TX_FIFO_COUNT_MASK; + plat->tx_fifo_full = S5L_TX_FIFO_FULL; + } else { + plat->rx_fifo_count_shift = S5P_RX_FIFO_COUNT_SHIFT; + plat->rx_fifo_count_mask = S5P_RX_FIFO_COUNT_MASK; + plat->rx_fifo_full = S5P_RX_FIFO_FULL; + plat->tx_fifo_count_shift = S5P_TX_FIFO_COUNT_SHIFT; + plat->tx_fifo_count_mask = S5P_TX_FIFO_COUNT_MASK; + plat->tx_fifo_full = S5P_TX_FIFO_FULL; + } + return 0; } @@ -200,7 +251,8 @@ static const struct dm_serial_ops s5p_serial_ops = { }; static const struct udevice_id s5p_serial_ids[] = { - { .compatible = "samsung,exynos4210-uart" }, + { .compatible = "samsung,exynos4210-uart", .data = PORT_S5P }, + { .compatible = "apple,s5l-uart", .data = PORT_S5L }, { } }; @@ -224,16 +276,24 @@ static inline void _debug_uart_init(void) struct s5p_uart *uart = (struct s5p_uart *)CONFIG_DEBUG_UART_BASE; s5p_serial_init(uart); - s5p_serial_baud(uart, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); +#if CONFIG_IS_ENABLED(ARCH_APPLE) + s5p_serial_baud(uart, 4, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); +#else + s5p_serial_baud(uart, 1, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); +#endif } static inline void _debug_uart_putc(int ch) { struct s5p_uart *uart = (struct s5p_uart *)CONFIG_DEBUG_UART_BASE; - while (readl(&uart->ufstat) & TX_FIFO_FULL); - +#if CONFIG_IS_ENABLED(ARCH_APPLE) + while (readl(&uart->ufstat) & S5L_TX_FIFO_FULL); + writel(ch, &uart->utxh); +#else + while (readl(&uart->ufstat) & S5P_TX_FIFO_FULL); writeb(ch, &uart->utxh); +#endif } DEBUG_UART_FUNCS |