diff options
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/musb-new/Kconfig | 11 | ||||
-rw-r--r-- | drivers/usb/musb-new/Makefile | 1 | ||||
-rw-r--r-- | drivers/usb/musb-new/mt85xx.c | 417 |
3 files changed, 428 insertions, 1 deletions
diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig index 79ad14ef66..6cf8a2b60b 100644 --- a/drivers/usb/musb-new/Kconfig +++ b/drivers/usb/musb-new/Kconfig @@ -47,6 +47,15 @@ config USB_MUSB_DSPS bool "TI DSPS platforms" if USB_MUSB_HOST || USB_MUSB_GADGET +config USB_MUSB_MT85XX + bool "Enable Mediatek MT85XX DRC USB controller" + depends on DM_USB && ARCH_MEDIATEK + default n + help + Say y to enable Mediatek MT85XX USB DRC controller support + if it is available on your Mediatek MUSB IP based platform. + DMA controllers are ignored. This driver follow musb-new + driver and usb gadget framework. config USB_MUSB_PIC32 bool "Enable Microchip PIC32 DRC USB controller" @@ -76,7 +85,7 @@ endif config USB_MUSB_PIO_ONLY bool "Disable DMA (always use PIO)" - default y if USB_MUSB_AM35X || USB_MUSB_PIC32 || USB_MUSB_OMAP2PLUS || USB_MUSB_DSPS || USB_MUSB_SUNXI + default y if USB_MUSB_AM35X || USB_MUSB_PIC32 || USB_MUSB_OMAP2PLUS || USB_MUSB_DSPS || USB_MUSB_SUNXI || USB_MUSB_MT85XX help All data is copied between memory and FIFO by the CPU. DMA controllers are ignored. diff --git a/drivers/usb/musb-new/Makefile b/drivers/usb/musb-new/Makefile index ec7852ce94..6355eb12dd 100644 --- a/drivers/usb/musb-new/Makefile +++ b/drivers/usb/musb-new/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_USB_MUSB_HOST) += musb_host.o musb_core.o musb_uboot.o obj-$(CONFIG_USB_MUSB_DSPS) += musb_dsps.o obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o obj-$(CONFIG_USB_MUSB_AM35X) += am35x.o +obj-$(CONFIG_USB_MUSB_MT85XX) += mt85xx.o obj-$(CONFIG_USB_MUSB_OMAP2PLUS) += omap2430.o obj-$(CONFIG_USB_MUSB_PIC32) += pic32.o obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o diff --git a/drivers/usb/musb-new/mt85xx.c b/drivers/usb/musb-new/mt85xx.c new file mode 100644 index 0000000000..131fd7dd79 --- /dev/null +++ b/drivers/usb/musb-new/mt85xx.c @@ -0,0 +1,417 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Mediatek "glue layer" + * + * Copyright (C) 2019-2021 by Mediatek + * Based on the AllWinner SUNXI "glue layer" code. + * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com> + * Copyright (C) 2013 Jussi Kivilinna <jussi.kivilinna@iki.fi> + * + * This file is part of the Inventra Controller Driver for Linux. + */ +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <dm/lists.h> +#include <dm/root.h> +#include <linux/usb/musb.h> +#include <usb.h> +#include "linux-compat.h" +#include "musb_core.h" +#include "musb_uboot.h" + +#define DBG_I(fmt, ...) \ + pr_info(fmt, ##__VA_ARGS__) + +struct mtk_musb_config { + struct musb_hdrc_config *config; +}; + +struct mtk_musb_glue { + struct musb_host_data mdata; + struct clk usbpllclk; + struct clk usbmcuclk; + struct clk usbclk; + struct mtk_musb_config *cfg; + struct device dev; +}; + +#define to_mtk_musb_glue(d) container_of(d, struct mtk_musb_glue, dev) + +/****************************************************************************** + * phy settings + ******************************************************************************/ +#define USB20_PHY_BASE 0x11110800 +#define USBPHY_READ8(offset) \ + readb((void *)(USB20_PHY_BASE + (offset))) +#define USBPHY_WRITE8(offset, value) \ + writeb(value, (void *)(USB20_PHY_BASE + (offset))) +#define USBPHY_SET8(offset, mask) \ + USBPHY_WRITE8(offset, (USBPHY_READ8(offset)) | (mask)) +#define USBPHY_CLR8(offset, mask) \ + USBPHY_WRITE8(offset, (USBPHY_READ8(offset)) & (~(mask))) + +static void mt_usb_phy_poweron(void) +{ + /* + * switch to USB function. + * (system register, force ip into usb mode). + */ + USBPHY_CLR8(0x6b, 0x04); + USBPHY_CLR8(0x6e, 0x01); + USBPHY_CLR8(0x21, 0x03); + + /* RG_USB20_BC11_SW_EN = 1'b0 */ + USBPHY_SET8(0x22, 0x04); + USBPHY_CLR8(0x1a, 0x80); + + /* RG_USB20_DP_100K_EN = 1'b0 */ + /* RG_USB20_DP_100K_EN = 1'b0 */ + USBPHY_CLR8(0x22, 0x03); + + /*OTG enable*/ + USBPHY_SET8(0x20, 0x10); + /* release force suspendm */ + USBPHY_CLR8(0x6a, 0x04); + + mdelay(800); + + /* force enter device mode */ + USBPHY_CLR8(0x6c, 0x10); + USBPHY_SET8(0x6c, 0x2E); + USBPHY_SET8(0x6d, 0x3E); +} + +static void mt_usb_phy_savecurrent(void) +{ + /* + * switch to USB function. + * (system register, force ip into usb mode). + */ + USBPHY_CLR8(0x6b, 0x04); + USBPHY_CLR8(0x6e, 0x01); + USBPHY_CLR8(0x21, 0x03); + + /* release force suspendm */ + USBPHY_CLR8(0x6a, 0x04); + USBPHY_SET8(0x68, 0x04); + /* RG_DPPULLDOWN./RG_DMPULLDOWN. */ + USBPHY_SET8(0x68, 0xc0); + /* RG_XCVRSEL[1:0] = 2'b01 */ + USBPHY_CLR8(0x68, 0x30); + USBPHY_SET8(0x68, 0x10); + /* RG_TERMSEL = 1'b1 */ + USBPHY_SET8(0x68, 0x04); + /* RG_DATAIN[3:0] = 4'b0000 */ + USBPHY_CLR8(0x69, 0x3c); + + /* + * force_dp_pulldown, force_dm_pulldown, + * force_xcversel, force_termsel. + */ + USBPHY_SET8(0x6a, 0xba); + + /* RG_USB20_BC11_SW_EN = 1'b0 */ + USBPHY_CLR8(0x1a, 0x80); + /* RG_USB20_OTG_VBUSSCMP_EN = 1'b0 */ + USBPHY_CLR8(0x1a, 0x10); + + mdelay(800); + + USBPHY_CLR8(0x6a, 0x04); + /* rg_usb20_pll_stable = 1 */ + //USBPHY_SET8(0x63, 0x02); + + mdelay(1); + + /* force suspendm = 1 */ + //USBPHY_SET8(0x6a, 0x04); +} + +static void mt_usb_phy_recover(void) +{ + /* clean PUPD_BIST_EN */ + /* PUPD_BIST_EN = 1'b0 */ + /* PMIC will use it to detect charger type */ + USBPHY_CLR8(0x1d, 0x10); + + /* force_uart_en = 1'b0 */ + USBPHY_CLR8(0x6b, 0x04); + /* RG_UART_EN = 1'b0 */ + USBPHY_CLR8(0x6e, 0x01); + /* force_uart_en = 1'b0 */ + USBPHY_CLR8(0x6a, 0x04); + + USBPHY_CLR8(0x21, 0x03); + USBPHY_CLR8(0x68, 0xf4); + + /* RG_DATAIN[3:0] = 4'b0000 */ + USBPHY_CLR8(0x69, 0x3c); + + USBPHY_CLR8(0x6a, 0xba); + + /* RG_USB20_BC11_SW_EN = 1'b0 */ + USBPHY_CLR8(0x1a, 0x80); + /* RG_USB20_OTG_VBUSSCMP_EN = 1'b1 */ + USBPHY_SET8(0x1a, 0x10); + + //HQA adjustment + USBPHY_CLR8(0x18, 0x08); + USBPHY_SET8(0x18, 0x06); + mdelay(800); + + /* force enter device mode */ + //USBPHY_CLR8(0x6c, 0x10); + //USBPHY_SET8(0x6c, 0x2E); + //USBPHY_SET8(0x6d, 0x3E); + + /* enable VRT internal R architecture */ + /* RG_USB20_INTR_EN = 1'b1 */ + USBPHY_SET8(0x00, 0x20); +} + +/****************************************************************************** + * MUSB Glue code + ******************************************************************************/ + +static irqreturn_t mtk_musb_interrupt(int irq, void *__hci) +{ + struct musb *musb = __hci; + irqreturn_t retval = IRQ_NONE; + + /* read and flush interrupts */ + musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); +// last_int_usb = musb->int_usb; + if (musb->int_usb) + musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb); + musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); + if (musb->int_tx) + musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx); + musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); + if (musb->int_rx) + musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx); + + if (musb->int_usb || musb->int_tx || musb->int_rx) + retval |= musb_interrupt(musb); + + return retval; +} + +/* musb_core does not call enable / disable in a balanced manner <sigh> */ +static bool enabled; + +static int mtk_musb_enable(struct musb *musb) +{ + struct mtk_musb_glue *glue = to_mtk_musb_glue(musb->controller); + + DBG_I("%s():\n", __func__); + + musb_ep_select(musb->mregs, 0); + musb_writeb(musb->mregs, MUSB_FADDR, 0); + + if (enabled) + return 0; + + mt_usb_phy_recover(); + + enabled = true; + + return 0; +} + +static void mtk_musb_disable(struct musb *musb) +{ + struct mtk_musb_glue *glue = to_mtk_musb_glue(musb->controller); + int ret; + + DBG_I("%s():\n", __func__); + + if (!enabled) + return; + + mt_usb_phy_savecurrent(); + + enabled = false; +} + +static int mtk_musb_init(struct musb *musb) +{ + struct mtk_musb_glue *glue = to_mtk_musb_glue(musb->controller); + int ret; + + DBG_I("%s():\n", __func__); + + ret = clk_enable(&glue->usbpllclk); + if (ret) { + dev_err(dev, "failed to enable usbpll clock\n"); + return ret; + } + ret = clk_enable(&glue->usbmcuclk); + if (ret) { + dev_err(dev, "failed to enable usbmcu clock\n"); + return ret; + } + ret = clk_enable(&glue->usbclk); + if (ret) { + dev_err(dev, "failed to enable usb clock\n"); + return ret; + } + + musb->isr = mtk_musb_interrupt; + + return 0; +} + +static int mtk_musb_exit(struct musb *musb) +{ + struct mtk_musb_glue *glue = to_mtk_musb_glue(musb->controller); + + clk_disable(&glue->usbclk); + clk_disable(&glue->usbmcuclk); + clk_disable(&glue->usbpllclk); + + return 0; +} + +static const struct musb_platform_ops mtk_musb_ops = { + .init = mtk_musb_init, + .exit = mtk_musb_exit, + .enable = mtk_musb_enable, + .disable = mtk_musb_disable, +}; + +/* MTK OTG supports up to 7 endpoints */ +#define MTK_MUSB_MAX_EP_NUM 8 +#define MTK_MUSB_RAM_BITS 16 + +static struct musb_fifo_cfg mtk_musb_mode_cfg[] = { + MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(5, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(5, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(6, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(6, FIFO_RX, 512), + MUSB_EP_FIFO_SINGLE(7, FIFO_TX, 512), + MUSB_EP_FIFO_SINGLE(7, FIFO_RX, 512), +}; + +static struct musb_hdrc_config musb_config = { + .fifo_cfg = mtk_musb_mode_cfg, + .fifo_cfg_size = ARRAY_SIZE(mtk_musb_mode_cfg), + .multipoint = true, + .dyn_fifo = true, + .num_eps = MTK_MUSB_MAX_EP_NUM, + .ram_bits = MTK_MUSB_RAM_BITS, +}; + +static int musb_usb_probe(struct udevice *dev) +{ + struct mtk_musb_glue *glue = dev_get_priv(dev); + struct musb_host_data *host = &glue->mdata; + struct musb_hdrc_platform_data pdata; + void *base = dev_read_addr_ptr(dev); + int ret; + + DBG_I("%s():\n", __func__); + +#ifdef CONFIG_USB_MUSB_HOST + struct usb_bus_priv *priv = dev_get_uclass_priv(dev); +#endif + + if (!base) + return -EINVAL; + + glue->cfg = (struct mtk_musb_config *)dev_get_driver_data(dev); + if (!glue->cfg) + return -EINVAL; + + ret = clk_get_by_name(dev, "usbpll", &glue->usbpllclk); + if (ret) { + dev_err(dev, "failed to get usbpll clock\n"); + return ret; + } + ret = clk_get_by_name(dev, "usbmcu", &glue->usbmcuclk); + if (ret) { + dev_err(dev, "failed to get usbmcu clock\n"); + return ret; + } + ret = clk_get_by_name(dev, "usb", &glue->usbclk); + if (ret) { + dev_err(dev, "failed to get usb clock\n"); + return ret; + } + + memset(&pdata, 0, sizeof(pdata)); + pdata.power = (u8)400; + pdata.platform_ops = &mtk_musb_ops; + pdata.config = glue->cfg->config; + +#ifdef CONFIG_USB_MUSB_HOST + priv->desc_before_addr = true; + + pdata.mode = MUSB_HOST; + host->host = musb_init_controller(&pdata, &glue->dev, base); + if (!host->host) + return -EIO; + + ret = musb_lowlevel_init(host); + if (!ret) + printf("MTK MUSB OTG (Host)\n"); +#else + pdata.mode = MUSB_PERIPHERAL; + host->host = musb_register(&pdata, &glue->dev, base); + if (!host->host) + return -EIO; + + printf("MTK MUSB OTG (Peripheral)\n"); +#endif + + mt_usb_phy_poweron(); + + return ret; +} + +static int musb_usb_remove(struct udevice *dev) +{ + struct mtk_musb_glue *glue = dev_get_priv(dev); + struct musb_host_data *host = &glue->mdata; + + musb_stop(host->host); + free(host->host); + host->host = NULL; + + return 0; +} + +static const struct mtk_musb_config mt8518_cfg = { + .config = &musb_config, +}; + +static const struct udevice_id mtk_musb_ids[] = { + { .compatible = "mediatek,mt8518-musb", + .data = (ulong)&mt8518_cfg }, + { } +}; + +U_BOOT_DRIVER(mtk_musb) = { + .name = "mtk_musb", +#ifdef CONFIG_USB_MUSB_HOST + .id = UCLASS_USB, +#else + .id = UCLASS_USB_GADGET_GENERIC, +#endif + .of_match = mtk_musb_ids, + .probe = musb_usb_probe, + .remove = musb_usb_remove, +#ifdef CONFIG_USB_MUSB_HOST + .ops = &musb_usb_ops, +#endif + .platdata_auto_alloc_size = sizeof(struct usb_platdata), + .priv_auto_alloc_size = sizeof(struct mtk_musb_glue), +}; |