diff options
Diffstat (limited to 'include/configs/M5329EVB.h')
| -rw-r--r-- | include/configs/M5329EVB.h | 91 |
1 files changed, 40 insertions, 51 deletions
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 47ea51c507..456135bdc6 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -18,21 +18,11 @@ * (easy to change) */ -#define CONFIG_SYS_UART_PORT (0) - -#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ +#define CFG_SYS_UART_PORT (0) /* I2C */ -#ifdef CONFIG_MCFFEC -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -#endif /* FEC_ENET */ - -#define CONFIG_HOSTNAME "M5329EVB" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=40010000\0" \ "u-boot=u-boot.bin\0" \ @@ -44,14 +34,14 @@ "save\0" \ "" -#define CONFIG_PRAM 512 /* 512 KB */ +#define CFG_PRAM 512 /* 512 KB */ -#define CONFIG_SYS_CLK 80000000 -#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3 +#define CFG_SYS_CLK 80000000 +#define CFG_SYS_CPU_CLK CFG_SYS_CLK * 3 -#define CONFIG_SYS_MBAR 0xFC000000 +#define CFG_SYS_MBAR 0xFC000000 -#define CONFIG_SYS_LATCH_ADDR (CONFIG_SYS_CS1_BASE + 0x80000) +#define CFG_SYS_LATCH_ADDR (CFG_SYS_CS1_BASE + 0x80000) /* * Low Level Configuration Settings @@ -61,45 +51,44 @@ /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_INIT_RAM_CTRL 0x221 +#define CFG_SYS_INIT_RAM_ADDR 0x80000000 +#define CFG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ +#define CFG_SYS_INIT_RAM_CTRL 0x221 /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 + * Please note that CFG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define CONFIG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */ -#define CONFIG_SYS_SDRAM_CFG1 0x53722730 -#define CONFIG_SYS_SDRAM_CFG2 0x56670000 -#define CONFIG_SYS_SDRAM_CTRL 0xE1092000 -#define CONFIG_SYS_SDRAM_EMOD 0x40010000 -#define CONFIG_SYS_SDRAM_MODE 0x018D0000 +#define CFG_SYS_SDRAM_BASE 0x40000000 +#define CFG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */ +#define CFG_SYS_SDRAM_CFG1 0x53722730 +#define CFG_SYS_SDRAM_CFG2 0x56670000 +#define CFG_SYS_SDRAM_CTRL 0xE1092000 +#define CFG_SYS_SDRAM_EMOD 0x40010000 +#define CFG_SYS_SDRAM_MODE 0x018D0000 /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ #ifdef CONFIG_SYS_FLASH_CFI -# define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ +# define CFG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ #endif #ifdef CONFIG_CMD_NAND -# define CONFIG_SYS_NAND_BASE CONFIG_SYS_CS2_BASE -# define CONFIG_SYS_NAND_SIZE 1 -# define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +# define CFG_SYS_NAND_BASE CFG_SYS_CS2_BASE +# define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } # define NAND_ALLOW_ERASE_ALL 1 #endif -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE +#define CFG_SYS_FLASH_BASE CFG_SYS_CS0_BASE /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -113,15 +102,15 @@ * Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) -#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ - CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ CF_CACR_DCM_P) /*----------------------------------------------------------------------- @@ -135,18 +124,18 @@ * CS4 - Available * CS5 - Available */ -#define CONFIG_SYS_CS0_BASE 0 -#define CONFIG_SYS_CS0_MASK 0x007f0001 -#define CONFIG_SYS_CS0_CTRL 0x00001fa0 +#define CFG_SYS_CS0_BASE 0 +#define CFG_SYS_CS0_MASK 0x007f0001 +#define CFG_SYS_CS0_CTRL 0x00001fa0 -#define CONFIG_SYS_CS1_BASE 0x10000000 -#define CONFIG_SYS_CS1_MASK 0x001f0001 -#define CONFIG_SYS_CS1_CTRL 0x002A3780 +#define CFG_SYS_CS1_BASE 0x10000000 +#define CFG_SYS_CS1_MASK 0x001f0001 +#define CFG_SYS_CS1_CTRL 0x002A3780 #ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_CS2_BASE 0x20000000 -#define CONFIG_SYS_CS2_MASK (16 << 20) -#define CONFIG_SYS_CS2_CTRL 0x00001f60 +#define CFG_SYS_CS2_BASE 0x20000000 +#define CFG_SYS_CS2_MASK (16 << 20) +#define CFG_SYS_CS2_CTRL 0x00001f60 #endif #endif /* _M5329EVB_H */ |