diff options
Diffstat (limited to 'include/configs/apf27.h')
-rw-r--r-- | include/configs/apf27.h | 266 |
1 files changed, 0 insertions, 266 deletions
diff --git a/include/configs/apf27.h b/include/configs/apf27.h deleted file mode 100644 index b69e5772a6..0000000000 --- a/include/configs/apf27.h +++ /dev/null @@ -1,266 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * - * Configuration settings for the Armadeus Project motherboard APF27 - * - * Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org> - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <linux/stringify.h> - -#define CONFIG_ENV_VERSION 10 -#define CONFIG_BOARD_NAME apf27 - -/* - * SoC configurations - */ -#define CONFIG_MX27 /* This is a Freescale i.MX27 Chip */ -#define CONFIG_MACH_TYPE 1698 /* APF27 */ - -/* - * Enable the call to miscellaneous platform dependent initialization. - */ - -/* - * SPL - */ -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_MAX_SIZE 2048 - -/* NAND boot config */ -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800 -#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_SIZE CONFIG_SYS_MONITOR_LEN - 0x800 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -#define CONFIG_HOSTNAME "apf27" -#define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root" - -/* - * Memory configurations - */ -#define CONFIG_NR_DRAM_POPULATED 1 - -#define ACFG_SDRAM_MBYTE_SYZE 64 - -#define PHYS_SDRAM_1 0xA0000000 -#define PHYS_SDRAM_2 0xB0000000 -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (512<<10)) - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE \ - + PHYS_SDRAM_1_SIZE - 0x0100000) - -/* - * FLASH organization - */ -#define ACFG_MONITOR_OFFSET 0x00000000 -#define CONFIG_SYS_MONITOR_LEN 0x00100000 /* 1MiB */ -#define CONFIG_ENV_RANGE 0X00080000 /* 512kB */ -#define CONFIG_FIRMWARE_OFFSET 0x00200000 -#define CONFIG_FIRMWARE_SIZE 0x00080000 /* 512kB */ -#define CONFIG_KERNEL_OFFSET 0x00300000 -#define CONFIG_ROOTFS_OFFSET 0x00800000 - -/* - * U-Boot general configurations - */ -#define CONFIG_SYS_CBSIZE 2048 /* console I/O buffer */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* Boot argument buffer size */ - -/* - * Boot Linux - */ -#define CONFIG_CMDLINE_TAG /* send commandline to Kernel */ -#define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */ -#define CONFIG_INITRD_TAG /* send initrd params */ - -#define CONFIG_BOOTFILE __stringify(CONFIG_BOARD_NAME) "-linux.bin" - -#define ACFG_CONSOLE_DEV ttySMX0 -#define CONFIG_BOOTCOMMAND "run ubifsboot" -#define CONFIG_SYS_AUTOLOAD "no" -/* - * Default load address for user programs and kernel - */ -#define CONFIG_LOADADDR 0xA0000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -/* - * Extra Environments - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "env_version=" __stringify(CONFIG_ENV_VERSION) "\0" \ - "consoledev=" __stringify(ACFG_CONSOLE_DEV) "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "partition=nand0,6\0" \ - "u-boot_addr=" __stringify(ACFG_MONITOR_OFFSET) "\0" \ - "env_addr=" __stringify(CONFIG_ENV_OFFSET) "\0" \ - "firmware_addr=" __stringify(CONFIG_FIRMWARE_OFFSET) "\0" \ - "firmware_size=" __stringify(CONFIG_FIRMWARE_SIZE) "\0" \ - "kernel_addr=" __stringify(CONFIG_KERNEL_OFFSET) "\0" \ - "rootfs_addr=" __stringify(CONFIG_ROOTFS_OFFSET) "\0" \ - "board_name=" __stringify(CONFIG_BOARD_NAME) "\0" \ - "kernel_addr_r=A0000000\0" \ - "check_env=if test -n ${flash_env_version}; " \ - "then env default env_version; " \ - "else env set flash_env_version ${env_version}; env save; "\ - "fi; " \ - "if itest ${flash_env_version} < ${env_version}; then " \ - "echo \"*** Warning - Environment version" \ - " change suggests: run flash_reset_env; reset\"; "\ - "env default flash_reset_env; "\ - "fi; \0" \ - "check_flash=nand lock; nand unlock ${env_addr}; \0" \ - "flash_reset_env=env default -f -a; saveenv; run update_env;" \ - "echo Flash environment variables erased!\0" \ - "download_uboot=tftpboot ${loadaddr} ${board_name}" \ - "-u-boot-with-spl.bin\0" \ - "flash_uboot=nand unlock ${u-boot_addr} ;" \ - "nand erase.part u-boot;" \ - "if nand write.trimffs ${fileaddr} ${u-boot_addr} ${filesize};"\ - "then nand lock; nand unlock ${env_addr};" \ - "echo Flashing of uboot succeed;" \ - "else echo Flashing of uboot failed;" \ - "fi; \0" \ - "update_uboot=run download_uboot flash_uboot\0" \ - "download_env=tftpboot ${loadaddr} ${board_name}" \ - "-u-boot-env.txt\0" \ - "flash_env=env import -t ${loadaddr}; env save; \0" \ - "update_env=run download_env flash_env\0" \ - "update_all=run update_env update_uboot\0" \ - "unlock_regs=mw 10000008 0; mw 10020008 0\0" \ - -/* - * Serial Driver - */ -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* - * NOR - */ - -/* - * NAND - */ - -#define CONFIG_MXC_NAND_REGS_BASE 0xD8000000 -#define CONFIG_SYS_NAND_BASE CONFIG_MXC_NAND_REGS_BASE -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -#define CONFIG_MXC_NAND_HWECC -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) -#define CONFIG_SYS_NAND_PAGE_COUNT CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE -#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 11 -#define NAND_MAX_CHIPS 1 - -#define CONFIG_FLASH_SHOW_PROGRESS 45 -#define CONFIG_SYS_NAND_QUIET 1 - -/* - * Partitions & Filsystems - */ - -/* - * Ethernet (on SOC imx FEC) - */ -#define CONFIG_FEC_MXC -#define CONFIG_FEC_MXC_PHYADDR 0x1f - -/* - * FPGA - */ -#define CONFIG_FPGA_COUNT 1 -#define CONFIG_SYS_FPGA_WAIT 250 /* 250 ms */ -#define CONFIG_SYS_FPGA_PROG_FEEDBACK -#define CONFIG_SYS_FPGA_CHECK_CTRLC -#define CONFIG_SYS_FPGA_CHECK_ERROR - -/* - * Fuses - IIM - */ -#ifdef CONFIG_CMD_IMX_FUSE -#define IIM_MAC_BANK 0 -#define IIM_MAC_ROW 5 -#define IIM0_SCC_KEY 11 -#define IIM1_SUID 1 -#endif - -/* - * I2C - */ - -#ifdef CONFIG_CMD_I2C -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_MXC_I2C1_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_MXC_I2C1_SLAVE 0x7F -#define CONFIG_SYS_MXC_I2C2_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_MXC_I2C2_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES { } - -#ifdef CONFIG_CMD_EEPROM -# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM 24LC02 */ -# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* msec */ -#endif /* CONFIG_CMD_EEPROM */ -#endif /* CONFIG_CMD_I2C */ - -/* - * SD/MMC - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MXC_MCI_REGS_BASE 0x10014000 -#endif - -/* - * RTC - */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_DS1374 -#define CONFIG_SYS_RTC_BUS_NUM 0 -#endif /* CONFIG_CMD_DATE */ - -/* - * PLL - * - * 31 | x |x| x x x x |x x x x x x x x x x |x x|x x x x|x x x x x x x x x x| 0 - * |CPLM|X|----PD---|--------MFD---------|XXX|--MFI--|-----MFN-----------| - */ -#define CONFIG_MX27_CLK32 32768 /* 32768 or 32000 Hz crystal */ - -#if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */ -/* micron 64MB */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */ -#endif - -#if (ACFG_SDRAM_MBYTE_SYZE == 128) -/* micron 128MB */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ -#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ -#endif - -#if (ACFG_SDRAM_MBYTE_SYZE == 256) -/* micron 256MB */ -#define PHYS_SDRAM_1_SIZE 0x10000000 /* 256 MB */ -#define PHYS_SDRAM_2_SIZE 0x10000000 /* 256 MB */ -#endif - -#endif /* __CONFIG_H */ |