diff options
Diffstat (limited to 'include/configs/ge_bx50v3.h')
| -rw-r--r-- | include/configs/ge_bx50v3.h | 190 |
1 files changed, 78 insertions, 112 deletions
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 694aa8ae76..45a4700ff4 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -44,6 +44,12 @@ #define CONFIG_REVISION_TAG #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) +#define CONFIG_HW_WATCHDOG +#define CONFIG_IMX_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT_MSECS 6000 + +#define CONFIG_LAST_STAGE_INIT + #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART @@ -102,121 +108,67 @@ #define CONFIG_SYS_TEXT_BASE 0x17800000 #define CONFIG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "image=/boot/uImage\0" \ - "uboot=u-boot.imx\0" \ - "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ - "fdt_addr=0x18000000\0" \ - "boot_fdt=yes\0" \ - "ip_dyn=yes\0" \ + "bootcause=POR\0" \ + "bootlimit=10\0" \ + "image=/boot/fitImage\0" \ + "fdt_high=0xffffffff\0" \ + "dev=mmc\0" \ + "devnum=1\0" \ + "rootdev=mmcblk0p\0" \ + "quiet=quiet loglevel=0\0" \ "console=" CONSOLE_DEV "\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "sddev=0\0" \ - "emmcdev=1\0" \ - "partnum=1\0" \ - "update_sd_firmware=" \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "if mmc dev ${mmcdev}; then " \ - "if ${get_cmd} ${update_sd_firmware_filename}; then " \ - "setexpr fw_sz ${filesize} / 0x200; " \ - "setexpr fw_sz ${fw_sz} + 1; " \ - "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ - "fi; " \ - "fi\0" \ - "update_sf_uboot=" \ - "if tftp $loadaddr $uboot; then " \ - "sf probe; " \ - "sf erase 0 0xC0000; " \ - "sf write $loadaddr 0x400 $filesize; " \ - "echo 'U-Boot upgraded. Please reset'; " \ - "fi\0" \ - "setargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/${rootdev} rw rootwait cma=128M " \ + "setargs=setenv bootargs root=/dev/${rootdev}${partnum} " \ + "ro rootwait cma=128M " \ + "bootcause=${bootcause} " \ + "${quiet} console=${console} ${rtc_status} " \ BX50V3_BOOTARGS_EXTRA "\0" \ - "loadbootscript=" \ - "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \ - " source\0" \ + "doquiet=" \ + "if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \ + "then setenv quiet; fi\0" \ + "hasfirstboot=" \ + "ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \ + "/boot/bootcause/firstboot\0" \ + "swappartitions=" \ + "setexpr partnum 3 - ${partnum}\0" \ + "failbootcmd=" \ + "msg=\"Monitor failed to start. Try again, or contact GE Service for support.\"; " \ + "echo $msg; " \ + "setenv stdout vga; " \ + "echo \"\n\n\n\n \" $msg; " \ + "setenv stdout serial; " \ + "mw.b 0x7000A000 0xbc; " \ + "mw.b 0x7000A001 0x00; " \ + "ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \ + "altbootcmd=" \ + "run doquiet; " \ + "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \ + "run hasfirstboot || setenv partnum 0; " \ + "if test ${partnum} != 0; then " \ + "setenv bootcause REVERT; " \ + "run swappartitions loadimage doboot; " \ + "fi; " \ + "run failbootcmd\0" \ "loadimage=" \ "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \ - "loadfdt=ext2load ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \ - "tryboot=" \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run doboot; " \ - "fi; " \ - "fi;\0" \ - "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \ + "doboot=" \ + "echo Booting from ${dev}:${devnum}:${partnum} ...; " \ "run setargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "bootm ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootm; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootm; " \ - "fi;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "${get_cmd} ${image}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ - "bootm ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootm; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootm; " \ - "fi;\0" \ + "bootm ${loadaddr}#conf@${confidx}\0" \ + "tryboot=" \ + "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \ + "run loadimage || run swappartitions && run loadimage || " \ + "setenv partnum 0 && echo MISSING IMAGE;" \ + "run doboot; " \ + "run failbootcmd\0" \ #define CONFIG_MMCBOOTCOMMAND \ - "setenv dev mmc; " \ - "setenv rootdev mmcblk0p${partnum}; " \ - \ - "setenv devnum ${sddev}; " \ - "if mmc dev ${devnum}; then " \ - "run tryboot; " \ - "setenv rootdev mmcblk1p${partnum}; " \ - "fi; " \ - \ - "setenv devnum ${emmcdev}; " \ "if mmc dev ${devnum}; then " \ + "run doquiet; " \ "run tryboot; " \ "fi; " \ #define CONFIG_USBBOOTCOMMAND \ - "usb start; " \ - "setenv dev usb; " \ - "setenv devnum 0; " \ - "setenv rootdev sda${partnum}; " \ - "run tryboot; " \ - \ - CONFIG_MMCBOOTCOMMAND \ - "bmode usb; " \ + "echo Unsupported; " \ #ifdef CONFIG_CMD_USB #define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND @@ -266,27 +218,32 @@ #define CONFIG_SYS_FSL_USDHC_NUM 3 /* Framebuffer */ +#define CONFIG_VIDEO #ifdef CONFIG_VIDEO #define CONFIG_VIDEO_IPUV3 -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_FG_COL 0xFF +#define CONFIG_SYS_CONSOLE_BG_COL 0x00 +#define CONFIG_HIDE_LOGO_VERSION #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP +#define CONFIG_CMD_BMP #endif #define CONFIG_PWM_IMX #define CONFIG_IMX6_PWM_PER_CLK 66000000 -#ifdef CONFIG_CMD_PCI +#define CONFIG_PCI +#define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW #define CONFIG_PCIE_IMX #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5) -#endif + +#define CONFIG_RTC_RX8010SJ +#define CONFIG_SYS_RTC_BUS_NUM 2 +#define CONFIG_SYS_I2C_RTC_ADDR 0x32 /* I2C Configs */ #define CONFIG_SYS_I2C @@ -296,9 +253,11 @@ #define CONFIG_SYS_I2C_MXC_I2C2 #define CONFIG_SYS_I2C_MXC_I2C3 -#define CONFIG_SYS_NUM_I2C_BUSES 9 +#define CONFIG_SYS_NUM_I2C_BUSES 11 #define CONFIG_SYS_I2C_MAX_HOPS 1 #define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ + {1, {I2C_NULL_HOP} }, \ + {2, {I2C_NULL_HOP} }, \ {0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \ {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \ {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \ @@ -311,4 +270,11 @@ #define CONFIG_BCH +#define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_BOOTCOUNT_EXT +#define CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE "mmc" +#define CONFIG_SYS_BOOTCOUNT_EXT_DEVPART "1:5" +#define CONFIG_SYS_BOOTCOUNT_EXT_NAME "/boot/failures" +#define CONFIG_SYS_BOOTCOUNT_ADDR 0x7000A000 + #endif /* __GE_BX50V3_CONFIG_H */ |