diff options
Diffstat (limited to 'include/configs/ip04.h')
| -rw-r--r-- | include/configs/ip04.h | 131 |
1 files changed, 0 insertions, 131 deletions
diff --git a/include/configs/ip04.h b/include/configs/ip04.h deleted file mode 100644 index 1531feb83d..0000000000 --- a/include/configs/ip04.h +++ /dev/null @@ -1,131 +0,0 @@ -/* - * U-Boot - Configuration file for IP04 board (having BF532 processor) - * - * Copyright (c) 2006 Intratrade Ltd., Ivan Danov, idanov@gmail.com - * - * Copyright (c) 2005-2010 Analog Devices Inc. - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef __CONFIG_IP04_H__ -#define __CONFIG_IP04_H__ - -#include <asm/config-pre.h> - -/* - * Processor Settings - */ -#define CONFIG_BFIN_CPU bf532-0.5 -#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_NAND - -/* - * Clock Settings - * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV - * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV - */ -/* CONFIG_CLKIN_HZ is any value in Hz */ -#define CONFIG_CLKIN_HZ 10000000 -/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ -/* 1 = CLKIN / 2 */ -#define CONFIG_CLKIN_HALF 0 -/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ -/* 1 = bypass PLL */ -#define CONFIG_PLL_BYPASS 0 -/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ -/* Values can range from 0-63 (where 0 means 64) */ -#define CONFIG_VCO_MULT 40 -/* CCLK_DIV controls the core clock divider */ -/* Values can be 1, 2, 4, or 8 ONLY */ -#define CONFIG_CCLK_DIV 1 -/* SCLK_DIV controls the system clock divider */ -/* Values can range from 1-15 */ -#define CONFIG_SCLK_DIV 3 - -/* - * Memory Settings - */ -#define CONFIG_MEM_ADD_WDTH 10 -#define CONFIG_MEM_SIZE 64 - -#define CONFIG_EBIU_SDRRC_VAL 0x408 -#define CONFIG_EBIU_SDGCTL_VAL 0x9111cd - -#define CONFIG_EBIU_AMGCTL_VAL 0xFF -#define CONFIG_EBIU_AMBCTL0_VAL 0xffc2ffc2 -#define CONFIG_EBIU_AMBCTL1_VAL 0xffc2ffc2 - -#define CONFIG_SYS_MONITOR_LEN (384 * 1024) -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) - -/* - * Network Settings - */ -#define ADI_CMDS_NETWORK 1 -#define CONFIG_HOSTNAME IP04 - -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_NO_SROM -#define CONFIG_DM9000_BASE 0x20100000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 2) - -/* - * Flash Settings - */ -#define CONFIG_ENV_OVERWRITE 1 - -/* - * SPI Settings - */ -#define CONFIG_BFIN_SPI -#define CONFIG_ENV_SPI_MAX_HZ 30000000 -#define CONFIG_SF_DEFAULT_SPEED 30000000 - -/* - * Env Storage Settings - */ -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_PREBOOT "echo starting from spi flash" -#define CONFIG_ENV_OFFSET 0x30000 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x10000 - -/* - * NAND Settings - */ -#define CONFIG_NAND_PLAT -#define CONFIG_SYS_NAND_BASE 0x20000000 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2)) -#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1)) -#define BFIN_NAND_WRITE(addr, cmd) \ - do { \ - bfin_write8(addr, cmd); \ - SSYNC(); \ - } while (0) - -#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) -#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) -#define NAND_PLAT_GPIO_DEV_READY GPIO_PF10 - -/* - * Misc Settings - */ -#define CONFIG_UART_CONSOLE 0 - -#undef CONFIG_SHOW_BOOT_PROGRESS -/* Enable this if bootretry required; currently it's disabled */ -#define CONFIG_BOOT_RETRY_TIME -1 -#define CONFIG_BOOTCOMMAND "run nandboot" - -/* - * Pull in common ADI header for remaining command/environment setup - */ -#include <configs/bfin_adi_common.h> - -#endif |