diff options
Diffstat (limited to 'include/configs/lx2160ardb.h')
| -rw-r--r-- | include/configs/lx2160ardb.h | 50 |
1 files changed, 0 insertions, 50 deletions
diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h index a51987e6b0..097f1224c9 100644 --- a/include/configs/lx2160ardb.h +++ b/include/configs/lx2160ardb.h @@ -8,47 +8,9 @@ #include "lx2160a_common.h" -/* Qixis */ -#define QIXIS_XMAP_MASK 0x07 -#define QIXIS_XMAP_SHIFT 5 -#define QIXIS_RST_CTL_RESET_EN 0x30 -#define QIXIS_LBMAP_DFLTBANK 0x00 -#define QIXIS_LBMAP_ALTBANK 0x20 -#define QIXIS_LBMAP_QSPI 0x00 -#define QIXIS_RCW_SRC_QSPI 0xff -#define QIXIS_RST_CTL_RESET 0x31 -#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 -#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 -#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 -#define QIXIS_LBMAP_MASK 0x0f -#define QIXIS_LBMAP_SD -#define QIXIS_LBMAP_EMMC -#define QIXIS_RCW_SRC_SD 0x08 -#define QIXIS_RCW_SRC_EMMC 0x09 -#define NON_EXTENDED_DUTCFG - /* VID */ - -#define I2C_MUX_CH_VOL_MONITOR 0xA -/* Voltage monitor on channel 2*/ -#define I2C_VOL_MONITOR_ADDR 0x63 -#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 -#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 -#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 #define CONFIG_VID_FLS_ENV "lx2160ardb_vdd_mv" #define CONFIG_VID - -/* The lowest and highest voltage allowed*/ -#define VDD_MV_MIN 775 -#define VDD_MV_MAX 855 - -/* PM Bus commands code for LTC3882*/ -#define PMBUS_CMD_PAGE 0x0 -#define PMBUS_CMD_READ_VOUT 0x8B -#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05 -#define PMBUS_CMD_VOUT_COMMAND 0x21 -#define PWM_CHANNEL0 0x0 - #define CONFIG_VOL_MONITOR_LTC3882_SET #define CONFIG_VOL_MONITOR_LTC3882_READ @@ -59,18 +21,6 @@ #if defined(CONFIG_FSL_MC_ENET) #define CONFIG_MII #define CONFIG_ETHPRIME "DPMAC1@xgmii" - -#define AQR107_PHY_ADDR1 0x04 -#define AQR107_PHY_ADDR2 0x05 -#define AQR107_IRQ_MASK 0x0C - -#define CORTINA_NO_FW_UPLOAD -#define CORTINA_PHY_ADDR1 0x0 -#define INPHI_PHY_ADDR1 0x0 - -#define RGMII_PHY_ADDR1 0x01 -#define RGMII_PHY_ADDR2 0x02 - #endif /* EMC2305 */ |