diff options
Diffstat (limited to 'include/configs/socfpga_arria5_secu1.h')
| -rw-r--r-- | include/configs/socfpga_arria5_secu1.h | 57 |
1 files changed, 2 insertions, 55 deletions
diff --git a/include/configs/socfpga_arria5_secu1.h b/include/configs/socfpga_arria5_secu1.h index 261ae56c1d..55168c2fb8 100644 --- a/include/configs/socfpga_arria5_secu1.h +++ b/include/configs/socfpga_arria5_secu1.h @@ -7,10 +7,9 @@ #define __CONFIG_SOCFPGA_SECU1_H__ #include <asm/arch/base_addr_ac5.h> -#include <linux/stringify.h> /* Eternal oscillator */ -#define CONFIG_SYS_TIMER_RATE 40000000 +#define CFG_SYS_TIMER_RATE 40000000 /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512MiB on SECU1 */ @@ -21,59 +20,7 @@ * the last two bytes of the 128 bytes large NVRAM in the * RTC which begin at address 0x20 */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -/* Environment settings */ - -/* - * FPGA Remote Update related environment - * - * Note that since those commands access the FPGA, the HPS-to-FPGA - * bridges MUST have been previously enabled (for example - * with 'bridge enable'). - */ -#define FPGA_RMTU_ENV \ - "rmtu_page=0xFF29000C\0" \ - "rmtu_reconfig=0xFF290018\0" \ - "fpga_safebase=0x0\0" \ - "fpga_userbase=0x2000000\0" \ - "_fpga_loaduser=echo Loading FPGA USER image..." \ - " && mw ${rmtu_page} ${fpga_userbase} && mw ${rmtu_reconfig} 1\0" \ - "_fpga_loadsafe=echo Loading FPGA SAFE image..." \ - " && mw ${rmtu_page} ${fpga_safebase} && mw ${rmtu_reconfig} 1\0" \ - -#define CONFIG_KM_NEW_ENV \ - "newenv=" \ - "nand erase 0x100000 0x40000\0" - -#define CONFIG_KM_DEF_ENV_BOOTTARGETS \ - "release=" \ - "run newenv; reset\0" \ - "develop=" \ - "tftp 0x200000 scripts/develop-secu.txt && env import -t 0x200000 ${filesize} && saveenv && reset\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - FPGA_RMTU_ENV \ - CONFIG_KM_DEF_ENV_BOOTTARGETS \ - CONFIG_KM_NEW_ENV \ - "socfpga_legacy_reset_compat=1\0" \ - "altbootcmd=run bootcmd;\0" \ - "bootlimit=6\0" \ - "bootnum=1\0" \ - "bootretry=" __stringify(CONFIG_BOOT_RETRY_TIME) "\0" \ - "fdt_addr=" __stringify(CONFIG_KM_FDT_ADDR) "\0" \ - "load=tftpboot ${loadaddr} u-boot-with-nand-spl.sfp\0" \ - "loadaddr=" __stringify(CONFIG_KM_KERNEL_ADDR) "\0" \ - "update=nand erase 0x0 0x00100000 && nand write ${loadaddr} 0x0 ${filesize}\0" \ - "userload=ubi part nand.ubi &&" \ - "ubi check rootfs$bootnum &&" \ - "ubi read $fdt_addr dtb$bootnum &&" \ - "ubi read $loadaddr kernel$bootnum\0" \ - "userboot=setenv bootargs " CONFIG_BOOTARGS \ - " ubi.mtd=1 ubi.block=0,rootfs$bootnum root=/dev/ubiblock0_$ubivolid" \ - " ro rootfstype=squashfs init=sbin/preinit;" \ - "bootz ${loadaddr} - ${fdt_addr}\0" \ - "verify=y\0" +#define CFG_SYS_I2C_RTC_ADDR 0x68 /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> |