diff options
Diffstat (limited to 'include/configs')
-rw-r--r-- | include/configs/ge_bx50v3.h | 1 | ||||
-rw-r--r-- | include/configs/imx8ulp_evk.h | 107 | ||||
-rw-r--r-- | include/configs/mx28evk.h | 7 | ||||
-rw-r--r-- | include/configs/mx6cuboxi.h | 5 |
4 files changed, 109 insertions, 11 deletions
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 2b61172cc7..5be3a49d05 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -150,7 +150,6 @@ #define CONFIG_PCI_SCAN_SHOW #define CONFIG_PCIE_IMX -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5) #endif /* __GE_BX50V3_CONFIG_H */ diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h new file mode 100644 index 0000000000..32f8773b24 --- /dev/null +++ b/include/configs/imx8ulp_evk.h @@ -0,0 +1,107 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020 NXP + */ + +#ifndef __IMX8ULP_EVK_H +#define __IMX8ULP_EVK_H + +#include <linux/sizes.h> +#include <asm/arch/imx-regs.h> + +#define CONFIG_SYS_BOOTM_LEN (SZ_64M) +#define CONFIG_SPL_MAX_SIZE (148 * 1024) +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" +#define CONFIG_SPL_STACK 0x22050000 +#define CONFIG_SPL_BSS_START_ADDR 0x22048000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x22040000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x8000 /* 32 KB */ + +#define CONFIG_MALLOC_F_ADDR 0x22040000 + +#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x95000000 /* SPL_RAM needed */ + +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE /* For RAW image gives a error info not panic */ + +#endif + +#define CONFIG_SERIAL_TAG + +#define CONFIG_REMAKE_ELF + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT + +/* ENET Config */ +#if defined(CONFIG_FEC_MXC) +#define CONFIG_ETHPRIME "FEC" +#define PHY_ANEG_TIMEOUT 20000 + +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_FEC_MXC_PHYADDR 1 + +#define IMX_FEC_BASE 0x29950000 +#endif + +#ifdef CONFIG_DISTRO_DEFAULTS +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) + +#include <config_distro_bootcmd.h> +#else +#define BOOTENV +#endif + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + BOOTENV \ + "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ + "image=Image\0" \ + "console=ttyLP1,115200 earlycon\0" \ + "fdt_addr_r=0x83000000\0" \ + "boot_fit=no\0" \ + "fdtfile=imx8ulp-evk.dtb\0" \ + "initrd_addr=0x83800000\0" \ + "bootm_size=0x10000000\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + +/* Link Definitions */ +#define CONFIG_LOADADDR 0x80480000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x80000 +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_ENV_OVERWRITE +#define CONFIG_MMCROOT "/dev/mmcblk2p2" + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_16M) + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define PHYS_SDRAM 0x80000000 +#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ + +/* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_CBSIZE 2048 +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Using ULP WDOG for reset */ +#define WDOG_BASE_ADDR WDG3_RBASE +#endif diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index a65df48608..21f3277d5c 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -31,13 +31,6 @@ /* UBI and NAND partitioning */ -/* FEC Ethernet on SoC */ -#ifdef CONFIG_CMD_NET -#define CONFIG_FEC_MXC -#define CONFIG_FEC_MXC_MDIO_BASE MXS_ENET0_BASE -#define CONFIG_MX28_FEC_MAC_IN_OCOTP -#endif - /* RTC */ #ifdef CONFIG_CMD_DATE #define CONFIG_RTC_MXS diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 55717c77ab..9e5083b0d8 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -38,7 +38,6 @@ /* Command definition */ #define CONFIG_MXC_UART_BASE UART1_BASE -#define CONSOLE_DEV "ttymxc0" #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -54,10 +53,10 @@ "ramdiskaddr=0x13000000\0" \ "initrd_high=0xffffffff\0" \ "ip_dyn=yes\0" \ - "console=" CONSOLE_DEV ",115200\0" \ + "console=ttymxc0\0" \ "bootm_size=0x10000000\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "finduuid=part uuid mmc 0:1 uuid\0" \ + "finduuid=part uuid mmc 1:1 uuid\0" \ "update_sd_firmware=" \ "if test ${ip_dyn} = yes; then " \ "setenv get_cmd dhcp; " \ |