diff options
Diffstat (limited to 'include/configs')
101 files changed, 22 insertions, 438 deletions
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 4c4d2c0e10..eb4ccb17ea 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -315,7 +315,6 @@ #define CONFIG_HOSTNAME "mpc837x_rdb" #define CONFIG_ROOTPATH "/nfsroot" -#define CONFIG_RAMDISKFILE "rootfs.ext2.gz.uboot" /* U-Boot image on TFTP server */ #define CONFIG_UBOOTPATH "u-boot.bin" #define CONFIG_FDTFILE "mpc8379_rdb.dtb" @@ -337,7 +336,7 @@ "fdtaddr=780000\0" \ "fdtfile=" CONFIG_FDTFILE "\0" \ "ramdiskaddr=1000000\0" \ - "ramdiskfile=" CONFIG_RAMDISKFILE "\0" \ + "ramdiskfile=rootfs.ext2.gz.uboot\0" \ "console=ttyS0\0" \ "setbootargs=setenv bootargs " \ "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 3467a515b6..244f811ff6 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -47,8 +47,6 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 - /* I2C addresses of SPD EEPROMs */ #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 3826f414f0..0d8f13eeb0 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -161,8 +161,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 - /* DDR3 Controller Settings */ #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index adc2be872f..3d9e3e1c78 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -91,8 +91,6 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 - #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x52 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 2e7bb67d03..bedd931b18 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -145,7 +145,6 @@ #define CONFIG_VERY_BIG_RAM #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 #if defined(CONFIG_TARGET_T1024RDB) #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x51 diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 57a787565b..8ef6068cb9 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -127,8 +127,6 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 - #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x51 diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 1ff2a6147f..5a338f743a 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -116,7 +116,6 @@ #define CONFIG_VERY_BIG_RAM #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_DIMM_SLOTS_PER_CTLR 2 #define CONFIG_SYS_SPD_BUS_NUM 0 #define CONFIG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ #define SPD_EEPROM_ADDRESS1 0x51 @@ -167,7 +166,6 @@ #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} -#define CONFIG_FSL_QIXIS /* use common QIXIS code */ #define QIXIS_BASE 0xffdf0000 #define QIXIS_LBMAP_SWITCH 6 #define QIXIS_LBMAP_MASK 0x0f diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 5cd987b686..3c13905729 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -111,7 +111,6 @@ #define CONFIG_VERY_BIG_RAM #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_SYS_SPD_BUS_NUM 0 #define CONFIG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ #define SPD_EEPROM_ADDRESS1 0x51 diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 610e36e94f..834855c336 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -92,8 +92,6 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 - /* * IFC Definitions */ diff --git a/include/configs/alt.h b/include/configs/alt.h index acc416de06..090bee7d2d 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -41,9 +41,5 @@ /* SPL support */ #define CONFIG_SPL_STACK 0xe6340000 #define CONFIG_SPL_MAX_SIZE 0x4000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_CONS_SCIF2 -#define CONFIG_SH_SCIF_CLK_FREQ 65000000 -#endif #endif /* __ALT_H */ diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index da935f77b9..59c901994f 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -111,7 +111,6 @@ #undef CONFIG_SYS_MAXARGS #define CONFIG_SYS_MAXARGS 32 -#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h index eab4f22be3..b7a2fb695e 100644 --- a/include/configs/apalis_t30.h +++ b/include/configs/apalis_t30.h @@ -49,7 +49,6 @@ #define BOARD_EXTRA_ENV_SETTINGS \ UBOOT_UPDATE -#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h index 18e1e401ae..acd140ee35 100644 --- a/include/configs/armadillo-800eva.h +++ b/include/configs/armadillo-800eva.h @@ -33,7 +33,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* SCIF */ -#define CONFIG_CONS_SCIF1 #define SCIF0_BASE 0xe6c40000 #define SCIF1_BASE 0xe6c50000 #define SCIF2_BASE 0xe6c60000 @@ -68,7 +67,4 @@ #define CONFIG_SH_ETHER_SH7734_MII (0x01) #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII -/* Board Clock */ -#define CONFIG_SH_SCIF_CLK_FREQ get_board_sys_clk() - #endif /* __ARMADILLO_800EVA_H */ diff --git a/include/configs/beaver.h b/include/configs/beaver.h index 8be491e601..1d51bb4e4c 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -24,7 +24,6 @@ #define CONFIG_TEGRA_SLINK_CTRLS 6 #define CONFIG_SPI_FLASH_SIZE (4 << 20) -#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h index 762d1980bd..bd07b4b031 100644 --- a/include/configs/bk4r1.h +++ b/include/configs/bk4r1.h @@ -62,9 +62,6 @@ #define CONFIG_SYS_FSL_QSPI_LE #endif -/* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_BOARD_SIZE_LIMIT 520192 - /* boot command, including the target-defined one if any */ /* Extra env settings (including the target-defined ones if any) */ diff --git a/include/configs/cei-tk1-som.h b/include/configs/cei-tk1-som.h index 1cc8609102..0672b7dbbe 100644 --- a/include/configs/cei-tk1-som.h +++ b/include/configs/cei-tk1-som.h @@ -25,7 +25,6 @@ /* SPI */ #define CONFIG_SPI_FLASH_SIZE (4 << 20) -#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 99645f3f7a..a5ba916279 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -12,8 +12,6 @@ /* * High Level Board Configuration Options */ -/* Avoid overwriting factory configuration block */ -#define CONFIG_BOARD_SIZE_LIMIT 0x40000 /* * Environment settings diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h index c45016a835..fdf6bb2841 100644 --- a/include/configs/colibri_t20.h +++ b/include/configs/colibri_t20.h @@ -39,7 +39,6 @@ #undef CONFIG_SYS_MAXARGS #define CONFIG_SYS_MAXARGS 32 -#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h index 324e607839..cbe73bf86b 100644 --- a/include/configs/colibri_t30.h +++ b/include/configs/colibri_t30.h @@ -47,7 +47,6 @@ #define BOARD_EXTRA_ENV_SETTINGS \ UBOOT_UPDATE -#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 2e7b640357..24851494f5 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -23,9 +23,6 @@ #define CONFIG_FDTADDR 0x84000000 -/* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_BOARD_SIZE_LIMIT 520192 - #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ "fdt_addr_r=0x82000000\0" \ diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h index a7d922c3a2..b499d7085f 100644 --- a/include/configs/controlcenterdc.h +++ b/include/configs/controlcenterdc.h @@ -8,11 +8,6 @@ #define _CONFIG_CONTROLCENTERDC_H /* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_CUSTOMER_BOARD_SUPPORT - -/* * TEXT_BASE needs to be below 16MiB, since this area is scrubbed * for DDR ECC byte filling in the SPL before loading the main * U-Boot into it. diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 3a939b0b5d..121963fe5c 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -94,8 +94,6 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 - #define CONFIG_SYS_SPD_BUS_NUM 1 #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 diff --git a/include/configs/corvus.h b/include/configs/corvus.h index bb73201b54..4809b59ecc 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -31,10 +31,6 @@ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS -/* LED */ -#define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ -#define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ - /* SDRAM */ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index 2a020e96c4..e03a24adca 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -22,7 +22,6 @@ /* SPI */ #define CONFIG_SPI_FLASH_SIZE (4 << 20) -#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/ea-lpc3250devkitv2.h b/include/configs/ea-lpc3250devkitv2.h index 220c3c44d6..2d0e787879 100644 --- a/include/configs/ea-lpc3250devkitv2.h +++ b/include/configs/ea-lpc3250devkitv2.h @@ -11,11 +11,6 @@ #include <asm/arch/cpu.h> /* - * SoC and board defines - */ -#define CONFIG_BOARD_SIZE_LIMIT 0x000fffff /* maximum allowable size for full U-Boot binary */ - -/* * RAM */ #define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE diff --git a/include/configs/galileo.h b/include/configs/galileo.h index 57483a2af9..c50ecf27e4 100644 --- a/include/configs/galileo.h +++ b/include/configs/galileo.h @@ -22,7 +22,6 @@ "stderr=serial\0" /* 10/100M Ethernet support */ -#define CONFIG_DESIGNWARE_ETH #define CONFIG_DW_ALTDESCRIPTOR /* Environment configuration */ diff --git a/include/configs/gardena-smart-gateway-mt7688.h b/include/configs/gardena-smart-gateway-mt7688.h index 8b80841cdb..269bb93272 100644 --- a/include/configs/gardena-smart-gateway-mt7688.h +++ b/include/configs/gardena-smart-gateway-mt7688.h @@ -46,10 +46,4 @@ /* Environment settings */ -/* - * Environment is right behind U-Boot in flash. Make sure U-Boot - * doesn't grow into the environment area. - */ -#define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET - #endif /* __CONFIG_GARDENA_SMART_GATEWAY_H */ diff --git a/include/configs/gose.h b/include/configs/gose.h index dfa139dc7d..4ffa5bea8f 100644 --- a/include/configs/gose.h +++ b/include/configs/gose.h @@ -36,9 +36,5 @@ /* SPL support */ #define CONFIG_SPL_STACK 0xe6340000 #define CONFIG_SPL_MAX_SIZE 0x4000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_CONS_SCIF0 -#define CONFIG_SH_SCIF_CLK_FREQ 65000000 -#endif #endif /* __GOSE_H */ diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index 25c5a97c69..d5655e4ada 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -18,11 +18,6 @@ * max 4k env size is enough, but in case of nand * it has to be rounded to sector size */ -/* - * Environment is right behind U-Boot in flash. Make sure U-Boot - * doesn't grow into the environment area. - */ -#define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET /* * Default environment variables diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h index 48d522550e..d578b02460 100644 --- a/include/configs/integrator-common.h +++ b/include/configs/integrator-common.h @@ -9,33 +9,6 @@ #define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */ /* - * There are various dependencies on the core module (CM) fitted - * Users should refer to their CM user guide - */ -#include "armcoremodule.h" - -/* - * Initialize and remap the core module, use SPD to detect memory size - * If CONFIG_SKIP_LOWLEVEL_INIT is not defined & - * the core module has a CM_INIT register - * then the U-Boot initialisation code will - * e.g. ARM Boot Monitor or pre-loader is repeated once - * (to re-initialise any existing CM_INIT settings to safe values). - * - * This is usually not the desired behaviour since the platform - * will either reboot into the ARM monitor (or pre-loader) - * or continuously cycle thru it without U-Boot running, - * depending upon the setting of Integrator/CP switch S2-4. - * - * However it may be needed if Integrator/CP switch S2-1 - * is set OFF to boot direct into U-Boot. - * In that case comment out the line below. - */ -#define CONFIG_CM_INIT -#define CONFIG_CM_REMAP -#define CONFIG_CM_SPD_DETECT - -/* * The ARM boot monitor initializes the board. * However, the default U-Boot code also performs the initialization. * If desired, this can be prevented by defining SKIP_LOWLEVEL_INIT diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index f15a4d5725..49f07e997d 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -27,13 +27,4 @@ * PCI definitions */ -/*----------------------------------------------------------------------- - * There are various dependencies on the core module (CM) fitted - * Users should refer to their CM user guide - * - when porting adjust u-boot/Makefile accordingly - * to define the necessary CONFIG_ s for the CM involved - * see e.g. integratorcp_CM926EJ-S_config - */ -#include "armcoremodule.h" - #endif /* __CONFIG_H */ diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h index 5aaa31eaa1..df3c16540b 100644 --- a/include/configs/j721e_evm.h +++ b/include/configs/j721e_evm.h @@ -57,7 +57,6 @@ #define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE #define CONFIG_SYS_BOOTM_LEN SZ_64M -#define CONFIG_CQSPI_REF_CLK 133333333 /* HyperFlash related configuration */ diff --git a/include/configs/j721s2_evm.h b/include/configs/j721s2_evm.h index 8788464923..f0d56b8778 100644 --- a/include/configs/j721s2_evm.h +++ b/include/configs/j721s2_evm.h @@ -58,7 +58,6 @@ #define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE #define CONFIG_SYS_BOOTM_LEN SZ_64M -#define CONFIG_CQSPI_REF_CLK 133333333 /* U-Boot general configuration */ #define EXTRA_ENV_J721S2_BOARD_SETTINGS \ diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index b4c42fd372..69aa55f86c 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -23,7 +23,6 @@ /* SPI */ #define CONFIG_SPI_FLASH_SIZE (4 << 20) -#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h index 294ce4662e..887fda90d6 100644 --- a/include/configs/k2g_evm.h +++ b/include/configs/k2g_evm.h @@ -59,10 +59,6 @@ #define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE #define PHY_ANEG_TIMEOUT 10000 /* PHY needs longer aneg time */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_CQSPI_REF_CLK 384000000 -#endif - #define SPI_MTD_PARTS KEYSTONE_SPI1_MTD_PARTS #include <configs/ti_armv7_keystone2.h> diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h index 3285ae5987..0494790c84 100644 --- a/include/configs/km/pg-wcom-ls102xa.h +++ b/include/configs/km/pg-wcom-ls102xa.h @@ -22,8 +22,6 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 - #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x54 diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h index dd247eda98..dc45d16bfe 100644 --- a/include/configs/kmcent2.h +++ b/include/configs/kmcent2.h @@ -173,8 +173,6 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 - #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x54 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index 84603e3540..c0997aa3dd 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -36,9 +36,5 @@ /* SPL support */ #define CONFIG_SPL_STACK 0xe6340000 #define CONFIG_SPL_MAX_SIZE 0x4000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_CONS_SCIF0 -#define CONFIG_SH_SCIF_CLK_FREQ 65000000 -#endif #endif /* __KOELSCH_H */ diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index 77ea1327f9..97286b6180 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -19,7 +19,6 @@ #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define CONFIG_VERY_BIG_RAM -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index c20ef5f696..7e99490e52 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -27,7 +27,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* SCIF */ -#define CONFIG_CONS_SCIF4 #undef CONFIG_SYS_LOADS_BAUD_CHANGE @@ -67,7 +66,6 @@ /* Clock */ #define CONFIG_GLOBAL_TIMER #define CONFIG_SYS_CPU_CLK (1196000000) -#define CONFIG_SH_SCIF_CLK_FREQ get_board_sys_clk() #define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ #endif /* __KZM9G_H */ diff --git a/include/configs/lager.h b/include/configs/lager.h index 8cabad2853..a5abbaaeab 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -37,9 +37,5 @@ /* SPL support */ #define CONFIG_SPL_STACK 0xe6340000 #define CONFIG_SPL_MAX_SIZE 0x4000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_CONS_SCIF0 -#define CONFIG_SH_SCIF_CLK_FREQ 65000000 -#endif #endif /* __LAGER_H */ diff --git a/include/configs/linkit-smart-7688.h b/include/configs/linkit-smart-7688.h index 4a19fb881d..86bad6fa03 100644 --- a/include/configs/linkit-smart-7688.h +++ b/include/configs/linkit-smart-7688.h @@ -47,10 +47,4 @@ /* Environment settings */ -/* - * Environment is right behind U-Boot in flash. Make sure U-Boot - * doesn't grow into the environment area. - */ -#define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET - #endif /* __CONFIG_LINKIT_SMART_7688_H */ diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h index 8191c856a9..835eca7726 100644 --- a/include/configs/ls1012a2g5rdb.h +++ b/include/configs/ls1012a2g5rdb.h @@ -9,7 +9,6 @@ #include "ls1012a_common.h" /* DDR */ -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_SYS_SDRAM_SIZE 0x40000000 /* SATA */ diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h index 7735a005e2..44518cdf64 100644 --- a/include/configs/ls1012afrdm.h +++ b/include/configs/ls1012afrdm.h @@ -9,7 +9,6 @@ #include "ls1012a_common.h" /* DDR */ -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h index 7d8d6ee085..16ce89233f 100644 --- a/include/configs/ls1012afrwy.h +++ b/include/configs/ls1012afrwy.h @@ -13,7 +13,6 @@ #define BOARD_REV_C 0x00080000 #define BOARD_REV_MASK 0x001A0000 /* DDR */ -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define SYS_SDRAM_SIZE_512 0x20000000 #define SYS_SDRAM_SIZE_1024 0x40000000 diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index d57f28e496..e7a0294644 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -10,16 +10,13 @@ #include "ls1012a_common.h" /* DDR */ -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_SYS_SDRAM_SIZE 0x40000000 /* * QIXIS Definitions */ -#define CONFIG_FSL_QIXIS #ifdef CONFIG_FSL_QIXIS -#define CONFIG_QIXIS_I2C_ACCESS #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_LBMAP_BRDCFG_REG 0x04 #define QIXIS_LBMAP_SWITCH 6 diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index c51c4f2d3e..2490ba3212 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -10,7 +10,6 @@ #include "ls1012a_common.h" /* DDR */ -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_SYS_SDRAM_SIZE 0x40000000 /* diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 16c1741af2..010f3a1636 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -10,10 +10,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_QIXIS_I2C_ACCESS -#endif - #ifdef CONFIG_SD_BOOT #define CONFIG_SPL_MAX_SIZE 0x1a000 #define CONFIG_SPL_STACK 0x1001d000 @@ -49,7 +45,6 @@ #ifndef CONFIG_SYS_FSL_DDR4 #define CONFIG_SYS_DDR_RAW_TIMING #endif -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE @@ -146,7 +141,6 @@ /* * QIXIS Definitions */ -#define CONFIG_FSL_QIXIS #ifdef CONFIG_FSL_QIXIS #define QIXIS_BASE 0x7fb00000 diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h index 8d60727c08..b9c05943ec 100644 --- a/include/configs/ls1028aqds.h +++ b/include/configs/ls1028aqds.h @@ -10,15 +10,9 @@ #define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4) -/* DDR */ -#define CONFIG_DIMM_SLOTS_PER_CTLR 2 - -#define CONFIG_QIXIS_I2C_ACCESS - /* * QIXIS Definitions */ -#define CONFIG_FSL_QIXIS #ifdef CONFIG_FSL_QIXIS #define QIXIS_BASE 0x7fb00000 diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h index 7de186aa34..15ac1f565e 100644 --- a/include/configs/ls1028ardb.h +++ b/include/configs/ls1028ardb.h @@ -14,14 +14,9 @@ /* Store environment at top of flash */ -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 - -#define CONFIG_QIXIS_I2C_ACCESS - /* * QIXIS Definitions */ -#define CONFIG_FSL_QIXIS #ifdef CONFIG_FSL_QIXIS #define QIXIS_BASE 0x7fb00000 diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index 3ffc4bf0d8..b4329c2e89 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -10,7 +10,6 @@ #define CONFIG_LAYERSCAPE_NS_ACCESS -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 /* Physical Memory Map */ #define SPD_EEPROM_ADDRESS 0x51 @@ -135,13 +134,11 @@ #if defined(CONFIG_TFABOOT) || \ defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_QIXIS_I2C_ACCESS #endif /* * QIXIS Definitions */ -#define CONFIG_FSL_QIXIS #ifdef CONFIG_FSL_QIXIS #define QIXIS_BASE 0x7fb00000 diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index cc15462cb1..3ac4cb7643 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -10,7 +10,6 @@ #define CONFIG_LAYERSCAPE_NS_ACCESS -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 /* Physical Memory Map */ #define CONFIG_SYS_SPD_BUS_NUM 0 diff --git a/include/configs/ls1046afrwy.h b/include/configs/ls1046afrwy.h index d803fb746b..d56d0c0294 100644 --- a/include/configs/ls1046afrwy.h +++ b/include/configs/ls1046afrwy.h @@ -10,8 +10,6 @@ #define CONFIG_LAYERSCAPE_NS_ACCESS -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 - #define CONFIG_SYS_UBOOT_BASE 0x40100000 /* diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 434a5e172f..05aeedc410 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -10,7 +10,6 @@ #define CONFIG_LAYERSCAPE_NS_ACCESS -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 /* Physical Memory Map */ #define SPD_EEPROM_ADDRESS 0x51 @@ -152,13 +151,11 @@ #if defined(CONFIG_TFABOOT) || \ defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_QIXIS_I2C_ACCESS #endif /* * QIXIS Definitions */ -#define CONFIG_FSL_QIXIS #ifdef CONFIG_FSL_QIXIS #define QIXIS_BASE 0x7fb00000 diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index df699bca34..3dfbae268e 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -11,7 +11,6 @@ #define CONFIG_LAYERSCAPE_NS_ACCESS -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 /* Physical Memory Map */ #define SPD_EEPROM_ADDRESS 0x51 diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index 9e4db33044..1ea6befa9b 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -9,17 +9,12 @@ #include "ls1088a_common.h" #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_QIXIS_I2C_ACCESS #define SYS_NO_FLASH -#else -#define CONFIG_QIXIS_I2C_ACCESS #endif #define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) #define COUNTER_FREQUENCY 25000000 /* 25MHz */ -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 - #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS 0x51 #define CONFIG_SYS_SPD_BUS_NUM 0 @@ -118,7 +113,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_FSL_QIXIS #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_LBMAP_SWITCH 6 #define QIXIS_QMAP_MASK 0xe0 diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 0a1a48beba..1a9cda1e7d 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -10,9 +10,6 @@ #if defined(CONFIG_TFABOOT) || \ defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#ifndef CONFIG_SPL_BUILD -#define CONFIG_QIXIS_I2C_ACCESS -#endif #define SYS_NO_FLASH #endif @@ -26,7 +23,6 @@ #endif #define SPD_EEPROM_ADDRESS 0x51 #define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD on I2C bus 0 */ -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) @@ -105,10 +101,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE -#ifndef SPL_NO_QIXIS -#define CONFIG_FSL_QIXIS -#endif - #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_BRDCFG4_OFFSET 0x54 #define QIXIS_LBMAP_SWITCH 2 diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 9027bd06b0..82585f5dbf 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -40,16 +40,6 @@ #define CPU_RELEASE_ADDR secondary_boot_addr #define CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS -#ifdef CONFIG_SYS_FSL_HAS_DP_DDR -#define CONFIG_SYS_DP_DDR_BASE 0x6000000000ULL -/* - * DDR controller use 0 as the base address for binding. - * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access. - */ -#define CONFIG_SYS_DP_DDR_BASE_PHY 0 -#define CONFIG_DP_DDR_CTRL 2 -#define CONFIG_DP_DDR_NUM_CTRLS 1 -#endif /* Generic Timer Definitions */ /* diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 68ccc27c7a..4975fb782b 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -10,7 +10,6 @@ #include "ls2080a_common.h" #ifdef CONFIG_FSL_QSPI -#define CONFIG_QIXIS_I2C_ACCESS #define CONFIG_SYS_I2C_IFDR_DIV 0x7e #endif @@ -26,7 +25,6 @@ #define SPD_EEPROM_ADDRESS6 0x56 /* dummy address */ #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 #define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD on I2C bus 0 */ -#define CONFIG_DIMM_SLOTS_PER_CTLR 2 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1 #endif @@ -123,7 +121,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_FSL_QIXIS /* use common QIXIS code */ #define QIXIS_LBMAP_SWITCH 0x06 #define QIXIS_LBMAP_MASK 0x0f #define QIXIS_LBMAP_SHIFT 0 diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 1e90f94d50..de269f4c7e 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -9,12 +9,6 @@ #include "ls2080a_common.h" -#ifdef CONFIG_FSL_QSPI -#ifdef CONFIG_TARGET_LS2081ARDB -#define CONFIG_QIXIS_I2C_ACCESS -#endif -#endif - #define I2C_MUX_CH_VOL_MONITOR 0xa #define I2C_VOL_MONITOR_ADDR 0x38 @@ -36,7 +30,6 @@ #define SPD_EEPROM_ADDRESS6 0x56 /* dummy address */ #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 #define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD on I2C bus 0 */ -#define CONFIG_DIMM_SLOTS_PER_CTLR 2 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR #define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1 #endif @@ -125,7 +118,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_FSL_QIXIS /* use common QIXIS code */ #define QIXIS_LBMAP_SWITCH 0x06 #define QIXIS_LBMAP_MASK 0x0f #define QIXIS_LBMAP_SHIFT 0 @@ -211,7 +203,6 @@ #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 #ifdef CONFIG_TARGET_LS2081ARDB -#define CONFIG_FSL_QIXIS /* use common QIXIS code */ #define QIXIS_QMAP_MASK 0x07 #define QIXIS_QMAP_SHIFT 5 #define QIXIS_LBMAP_DFLTBANK 0x00 diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 38c4c31023..96dfe49a7e 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -33,7 +33,6 @@ #define SPD_EEPROM_ADDRESS6 0x56 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 #define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD on I2C bus 0 */ -#define CONFIG_DIMM_SLOTS_PER_CTLR 2 #define CONFIG_SYS_MONITOR_LEN (936 * 1024) /* Miscellaneous configurable options */ @@ -91,8 +90,6 @@ #define CONFIG_SYS_EEPROM_BUS_NUM 0 /* Qixis */ -#define CONFIG_FSL_QIXIS -#define CONFIG_QIXIS_I2C_ACCESS #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 /* PCI */ diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h index dd803e7053..5bd6cbefc6 100644 --- a/include/configs/m53menlo.h +++ b/include/configs/m53menlo.h @@ -71,7 +71,6 @@ #ifdef CONFIG_CMD_NET #define IMX_FEC_BASE FEC_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 0x0 -#define CONFIG_DISCOVER_PHY #endif #define CONFIG_SYS_RTC_BUS_NUM 1 /* I2C2 */ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 744e20e58e..663837f33d 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -30,9 +30,6 @@ # define CONFIG_SYS_MAX_FLASH_SECT 2048 #endif -#define CONFIG_ICACHE -#define CONFIG_DCACHE - #ifndef XILINX_DCACHE_BYTE_SIZE #define XILINX_DCACHE_BYTE_SIZE 32768 #endif diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index f299cc06d3..ccfe292f6c 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -130,17 +130,4 @@ * environment organization */ -/* - * Environment starts at CONFIG_ENV_OFFSET=0xC0000 = 768k = 768 * 1024 = 786432 - * - * Detect overlap between U-Boot image and environment area in build-time - * - * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.imx offset - * CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408 - * - * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so - * write the direct value here - */ -#define CONFIG_BOARD_SIZE_LIMIT 785408 - #endif diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 43455aa531..8b9f0a2901 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -106,18 +106,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* Environment starts at 768k = 768 * 1024 = 786432 */ -/* - * Detect overlap between U-Boot image and environment area in build-time - * - * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.imx offset - * CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408 - * - * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so - * write the direct value here - */ -#define CONFIG_BOARD_SIZE_LIMIT 785408 - #ifdef CONFIG_CMD_SATA #define CONFIG_DWC_AHSATA_PORT_ID 0 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h index d3ba144927..ce6afcde2a 100644 --- a/include/configs/mx7ulp_com.h +++ b/include/configs/mx7ulp_com.h @@ -17,16 +17,6 @@ #define CONFIG_SYS_BOOTM_LEN 0x1000000 -/* - * Detect overlap between U-Boot image and environment area in build-time - * - * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot-dtb.imx offset - * CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408 - * - * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so - * write the direct value here - */ -#define CONFIG_BOARD_SIZE_LIMIT 785408 #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* Using ULP WDOG for reset */ diff --git a/include/configs/nyan-big.h b/include/configs/nyan-big.h index 3584d9ad90..bc5754566b 100644 --- a/include/configs/nyan-big.h +++ b/include/configs/nyan-big.h @@ -26,7 +26,6 @@ /* SPI */ #define CONFIG_SPI_FLASH_SIZE (4 << 20) -#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/openrd.h b/include/configs/openrd.h index 7dad002f3b..006f06e6af 100644 --- a/include/configs/openrd.h +++ b/include/configs/openrd.h @@ -22,11 +22,6 @@ * max 4k env size is enough, but in case of nand * it has to be rounded to sector size */ -/* - * Environment is right behind U-Boot in flash. Make sure U-Boot - * doesn't grow into the environment area. - */ -#define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET /* * Default environment variables diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index c2fc3b0435..17b9021fbf 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -158,8 +158,6 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 - /* Default settings for DDR3 */ #ifndef CONFIG_TARGET_P2020RDB #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f diff --git a/include/configs/p2371-0000.h b/include/configs/p2371-0000.h index 5cebafc7c7..ecd0405d29 100644 --- a/include/configs/p2371-0000.h +++ b/include/configs/p2371-0000.h @@ -22,7 +22,6 @@ /* SPI */ #define CONFIG_SPI_FLASH_SIZE (4 << 20) -#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" #endif /* _P2371_0000_H */ diff --git a/include/configs/p2371-2180.h b/include/configs/p2371-2180.h index 5e1d50b254..ef1fa2a592 100644 --- a/include/configs/p2371-2180.h +++ b/include/configs/p2371-2180.h @@ -22,7 +22,6 @@ /* SPI */ #define CONFIG_SPI_FLASH_SIZE (4 << 20) -#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" /* Crystal is 38.4MHz. clk_m runs at half that rate */ diff --git a/include/configs/p2571.h b/include/configs/p2571.h index 5a89dc8a4a..50cddb4a4a 100644 --- a/include/configs/p2571.h +++ b/include/configs/p2571.h @@ -22,7 +22,6 @@ /* SPI */ #define CONFIG_SPI_FLASH_SIZE (4 << 20) -#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" #endif /* _P2571_H */ diff --git a/include/configs/p3450-0000.h b/include/configs/p3450-0000.h index b03d3a433b..1c962be8b8 100644 --- a/include/configs/p3450-0000.h +++ b/include/configs/p3450-0000.h @@ -33,7 +33,6 @@ "fi\0" /* General networking support */ -#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" /* Crystal is 38.4MHz. clk_m runs at half that rate */ diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index fd4a0b1aa8..79b69dfe17 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -16,9 +16,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 -/* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_BOARD_SIZE_LIMIT 520192 - /* if no target-specific extra environment settings were defined by the target, define an empty one */ #ifndef PCM052_EXTRA_ENV_SETTINGS diff --git a/include/configs/pico-imx6.h b/include/configs/pico-imx6.h index 536e07b4da..855d799348 100644 --- a/include/configs/pico-imx6.h +++ b/include/configs/pico-imx6.h @@ -116,18 +116,6 @@ /* Environment organization */ -/* Environment starts at 768k = 768 * 1024 = 786432 */ -/* - * Detect overlap between U-Boot image and environment area in build-time - * - * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.img offset - * CONFIG_BOARD_SIZE_LIMIT = 768k - 69k = 699k = 715776 - * - * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so - * write the direct value here - */ -#define CONFIG_BOARD_SIZE_LIMIT 715776 - /* Ethernet Configuration */ #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_MXC_PHYADDR 1 diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h index 2646f19cef..39be433570 100644 --- a/include/configs/pico-imx6ul.h +++ b/include/configs/pico-imx6ul.h @@ -116,17 +116,6 @@ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* environment organization */ -/* Environment starts at 768k = 768 * 1024 = 786432 */ -/* - * Detect overlap between U-Boot image and environment area in build-time - * - * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.img offset - * CONFIG_BOARD_SIZE_LIMIT = 768k - 69k = 699k = 715776 - * - * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so - * write the direct value here - */ -#define CONFIG_BOARD_SIZE_LIMIT 715776 #ifdef CONFIG_DM_VIDEO #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h index a90befc011..06fd78f9da 100644 --- a/include/configs/pico-imx7d.h +++ b/include/configs/pico-imx7d.h @@ -122,16 +122,6 @@ /* FLASH and environment organization */ /* Environment starts at 768k = 768 * 1024 = 786432 */ -/* - * Detect overlap between U-Boot image and environment area in build-time - * - * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.img offset - * CONFIG_BOARD_SIZE_LIMIT = 768k - 69k = 699k = 715776 - * - * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so - * write the direct value here - */ -#define CONFIG_BOARD_SIZE_LIMIT 715776 #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/porter.h b/include/configs/porter.h index 661b7ea0cd..bf380ddf05 100644 --- a/include/configs/porter.h +++ b/include/configs/porter.h @@ -41,9 +41,5 @@ /* SPL support */ #define CONFIG_SPL_STACK 0xe6340000 #define CONFIG_SPL_MAX_SIZE 0x4000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_CONS_SCIF0 -#define CONFIG_SH_SCIF_CLK_FREQ 65000000 -#endif #endif /* __PORTER_H */ diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 869f9f52ae..54674094e8 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -4,7 +4,6 @@ #define __LITTLE_ENDIAN__ 1 /* SCIF */ -#define CONFIG_CONS_SCIF1 1 /* SDRAM */ #define CONFIG_SYS_SDRAM_BASE 0x8C000000 diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h index 2422f03792..64743382ed 100644 --- a/include/configs/rcar-gen3-common.h +++ b/include/configs/rcar-gen3-common.h @@ -44,9 +44,6 @@ #define CONFIG_SYS_MONITOR_LEN (1 * 1024 * 1024) #define CONFIG_SYS_BOOTM_LEN (64 << 20) -/* The HF/QSPI layout permits up to 1 MiB large bootloader blob */ -#define CONFIG_BOARD_SIZE_LIMIT 1048576 - /* ENV setting */ #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -62,9 +59,5 @@ #endif #define CONFIG_SPL_STACK 0xe6304000 #define CONFIG_SPL_MAX_SIZE 0x7000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_CONS_SCIF2 -#define CONFIG_SH_SCIF_CLK_FREQ 65000000 -#endif #endif /* __RCAR_GEN3_COMMON_H */ diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 0ec60cadb4..3b4347dd00 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -67,18 +67,14 @@ "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \ "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ -#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext4" \ - " ${console} ${meminfo}" - -#define CONFIG_COMMON_BOOT "${console} ${meminfo} ${mtdparts}" - -#define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x100000;" \ - " onenand write 0x32008000 0x0 0x100000\0" +#define COMMON_BOOT "${console} ${meminfo} ${mtdparts}" #define CONFIG_MISC_COMMON #define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_UPDATEB \ + "updateb=" \ + "onenand erase 0x0 0x100000;" \ + "onenand write 0x32008000 0x0 0x100000\0" \ "updatek=" \ "onenand erase 0xc00000 0x600000;" \ "onenand write 0x31008000 0xc00000 0x600000\0" \ @@ -91,22 +87,23 @@ "flashboot=" \ "set bootargs root=/dev/mtdblock${bootblock} " \ "rootfstype=${rootfstype} ${opts} " \ - "${lcdinfo} " CONFIG_COMMON_BOOT "; run bootk\0" \ + "${lcdinfo} " COMMON_BOOT "; run bootk\0" \ "ubifsboot=" \ "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ "${opts} ${lcdinfo} " \ - CONFIG_COMMON_BOOT "; run bootk\0" \ + COMMON_BOOT "; run bootk\0" \ "tftpboot=" \ "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ - "${opts} ${lcdinfo} " CONFIG_COMMON_BOOT \ + "${opts} ${lcdinfo} " COMMON_BOOT \ "; tftp 0x30007FC0 uImage; bootm 0x30007FC0\0" \ "ramboot=" \ - "set bootargs " CONFIG_RAMDISK_BOOT \ + "set bootargs root=/dev/ram0 rw rootfstype=ext4" \ + " ${console} ${meminfo} " \ "initrd=0x33000000,8M ramdisk=8192\0" \ "mmcboot=" \ "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ "rootfstype=${rootfstype} ${opts} ${lcdinfo} " \ - CONFIG_COMMON_BOOT "; run bootk\0" \ + COMMON_BOOT "; run bootk\0" \ "boottrace=setenv opts initcall_debug; run bootcmd\0" \ "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \ "verify=n\0" \ diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index 4499a63aed..0cc58c3a7d 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -18,11 +18,6 @@ * max 4k env size is enough, but in case of nand * it has to be rounded to sector size */ -/* - * Environment is right behind U-Boot in flash. Make sure U-Boot - * doesn't grow into the environment area. - */ -#define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET /* * Default environment variables diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index bfadf4a6b8..08c4d52d65 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -15,9 +15,6 @@ #include <asm/arch/omap.h> -#define CONFIG_DMA_COHERENT -#define CONFIG_DMA_COHERENT_SIZE (1 << 20) - /* commands to include */ #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/silk.h b/include/configs/silk.h index fa195c62d5..574ba228d8 100644 --- a/include/configs/silk.h +++ b/include/configs/silk.h @@ -41,9 +41,5 @@ /* SPL support */ #define CONFIG_SPL_STACK 0xe6340000 #define CONFIG_SPL_MAX_SIZE 0x4000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_CONS_SCIF2 -#define CONFIG_SH_SCIF_CLK_FREQ 65000000 -#endif #endif /* __SILK_H */ diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index aca7870d3a..e4e15f92d1 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -47,10 +47,6 @@ /* setting board specific options */ #define CONFIG_SYS_AUTOLOAD "yes" -/* The LED PINs */ -#define CONFIG_RED_LED AT91_PIN_PA9 -#define CONFIG_GREEN_LED AT91_PIN_PA6 - /* * SDRAM: 1 bank, 64 MB, base address 0x20000000 * Already initialized before u-boot gets started. diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 4401094ee3..8eea45450b 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -35,19 +35,14 @@ /* PWM */ #define CONFIG_PWM 1 -#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \ - " console=ttySAC0,115200n8" \ - " mem=128M" - -#define CONFIG_COMMON_BOOT "console=ttySAC0,115200n8" \ +#define COMMON_BOOT "console=ttySAC0,115200n8" \ " mem=128M " \ " " CONFIG_MTDPARTS_DEFAULT -#define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x40000;" \ - " onenand write 0x32008000 0x0 0x40000\0" - #define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_UPDATEB \ + "updateb=" \ + "onenand erase 0x0 0x40000;" \ + "onenand write 0x32008000 0x0 0x40000\0" \ "updatek=" \ "onenand erase 0x60000 0x300000;" \ "onenand write 0x31008000 0x60000 0x300000\0" \ @@ -60,25 +55,26 @@ "flashboot=" \ "set bootargs root=/dev/mtdblock${bootblock} " \ "rootfstype=${rootfstype} " \ - "ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT ";" \ + "ubi.mtd=${ubiblock} ${opts} " COMMON_BOOT ";" \ "run bootk\0" \ "ubifsboot=" \ "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ - " ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT "; " \ + " ubi.mtd=${ubiblock} ${opts} " COMMON_BOOT "; " \ "run bootk\0" \ "boottrace=setenv opts initcall_debug; run bootcmd\0" \ "android=" \ "set bootargs root=ubi0!ramdisk ubi.mtd=${ubiblock} " \ - "rootfstype=ubifs init=/init.sh " CONFIG_COMMON_BOOT "; " \ + "rootfstype=ubifs init=/init.sh " COMMON_BOOT "; " \ "run bootk\0" \ "nfsboot=" \ "set bootargs root=/dev/nfs ubi.mtd=${ubiblock} " \ "nfsroot=${nfsroot},nolock " \ "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:nowplus:usb0:off " CONFIG_COMMON_BOOT "; " \ + "${netmask}:nowplus:usb0:off " COMMON_BOOT "; " \ "run bootk\0" \ "ramboot=" \ - "set bootargs " CONFIG_RAMDISK_BOOT \ + "set bootargs root=/dev/ram0 rw rootfstype=ext2" \ + " console=ttySAC0,115200n8 mem=128M" \ " initrd=0x33000000,8M ramdisk=8192\0" \ "rootfstype=cramfs\0" \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index e094bef3b5..5ecd1e6399 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -122,15 +122,6 @@ #endif /* - * QSPI support - */ -/* QSPI reference clock */ -#ifndef __ASSEMBLY__ -unsigned int cm_get_qspi_controller_clk_hz(void); -#define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz() -#endif - -/* * USB */ diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index b810567a03..c288d548f5 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -61,11 +61,6 @@ #define MTDIDS_DEFAULT "nor0=ff705000.spi.0" #endif /* CONFIG_SPL_BUILD */ -#ifndef __ASSEMBLY__ -unsigned int cm_get_qspi_controller_clk_hz(void); -#define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz() -#endif - #endif /* CONFIG_CADENCE_QSPI */ /* diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h index 8469b1527f..9455e4cb56 100644 --- a/include/configs/socfpga_vining_fpga.h +++ b/include/configs/socfpga_vining_fpga.h @@ -186,9 +186,6 @@ "fi\0" \ "socfpga_legacy_reset_compat=1\0" -/* Support changing the prompt string */ -#define CONFIG_CMDLINE_PS_SUPPORT - /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 687e3a827d..daba8278c6 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -59,8 +59,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_VERY_BIG_RAM -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 - /* I2C addresses of SPD EEPROMs */ #define SPD_EEPROM_ADDRESS 0x50 /* CTLR 0 DIMM 0 */ diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index c9649a085e..21bab5aafd 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -17,9 +17,6 @@ #define CONFIG_SYS_MAX_FLASH_SECT 12 -#define CONFIG_RED_LED 110 -#define CONFIG_GREEN_LED 109 - #define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ #define CONFIG_SYS_CBSIZE 1024 diff --git a/include/configs/stout.h b/include/configs/stout.h index f9574be3f7..bcc6fcd36b 100644 --- a/include/configs/stout.h +++ b/include/configs/stout.h @@ -45,9 +45,5 @@ /* SPL support */ #define CONFIG_SPL_STACK 0xe6340000 #define CONFIG_SPL_MAX_SIZE 0x4000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_CONS_SCIFA0 -#define CONFIG_SH_SCIF_CLK_FREQ 52000000 -#endif #endif /* __STOUT_H */ diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index feec8695f2..137672909b 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -31,12 +31,4 @@ /* Misc configuration */ -/* -+ * QSPI support -+ */ -#ifdef CONFIG_OF_CONTROL /* QSPI is controlled via DT */ -#define CONFIG_CQSPI_REF_CLK ((30/4)/2)*1000*1000 - -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index c467e9bd15..a9031035d7 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -98,15 +98,6 @@ /* mmc config */ #define CONFIG_MMC_SUNXI_SLOT 0 -#if defined(CONFIG_ENV_IS_IN_MMC) -/* - * This is actually (CONFIG_ENV_OFFSET - - * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used - * directly in a makefile, without the preprocessor expansion. - */ -#define CONFIG_BOARD_SIZE_LIMIT 0x7e000 -#endif - #define CONFIG_SYS_MMC_MAX_DEVICE 4 /* diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 065b406e2e..b7a94812f3 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -55,8 +55,6 @@ #endif /* CONFIG_CMD_USB_MASS_STORAGE */ #endif /* CONFIG_CMD_USB */ -#define CONFIG_BOARD_SIZE_LIMIT 392192 /* (CONFIG_ENV_OFFSET - 1024) */ - #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \ diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index d9d89b6d75..755a41fef7 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -70,10 +70,6 @@ #define BOARD_EXTRA_ENV_SETTINGS #endif -#ifndef CONFIG_CHROMEOS_EXTRA_ENV_SETTINGS -#define CONFIG_CHROMEOS_EXTRA_ENV_SETTINGS -#endif - #ifdef CONFIG_ARM64 #define FDT_HIGH "ffffffffffffffff" #define INITRD_HIGH "ffffffffffffffff" @@ -88,8 +84,7 @@ "fdt_high=" FDT_HIGH "\0" \ "initrd_high=" INITRD_HIGH "\0" \ BOOTENV \ - BOARD_EXTRA_ENV_SETTINGS \ - CONFIG_CHROMEOS_EXTRA_ENV_SETTINGS + BOARD_EXTRA_ENV_SETTINGS #if defined(CONFIG_TEGRA20_SFLASH) || defined(CONFIG_TEGRA20_SLINK) || defined(CONFIG_TEGRA114_SPI) #define CONFIG_TEGRA_SPI diff --git a/include/configs/tegra-common-usb-gadget.h b/include/configs/tegra-common-usb-gadget.h deleted file mode 100644 index 201f4bc093..0000000000 --- a/include/configs/tegra-common-usb-gadget.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * (C) Copyright 2014 - * NVIDIA Corporation <www.nvidia.com> - */ - -#ifndef _TEGRA_COMMON_USB_GADGET_H_ -#define _TEGRA_COMMON_USB_GADGET_H_ - -#ifndef CONFIG_SPL_BUILD -/* USB gadget mode support*/ -#ifndef CONFIG_TEGRA20 -#define CONFIG_CI_UDC_HAS_HOSTPC -#endif -/* DFU protocol */ -#endif - -#endif /* _TEGRA_COMMON_USB_GADGET_H_ */ diff --git a/include/configs/ten64.h b/include/configs/ten64.h index 1a62ddf45d..f82b1e0d21 100644 --- a/include/configs/ten64.h +++ b/include/configs/ten64.h @@ -11,8 +11,6 @@ #define COUNTER_FREQUENCY 25000000 /* 25MHz */ -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 - #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd" diff --git a/include/configs/venice2.h b/include/configs/venice2.h index fe861a6f7b..03aa7adcc0 100644 --- a/include/configs/venice2.h +++ b/include/configs/venice2.h @@ -23,7 +23,6 @@ /* SPI */ #define CONFIG_SPI_FLASH_SIZE (4 << 20) -#include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index ebae8223fe..db7c8be7ce 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -29,9 +29,6 @@ /* I2C Configs */ #define CONFIG_SYS_SPD_BUS_NUM 0 -/* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_BOARD_SIZE_LIMIT 520192 - /* * We do have 128MB of memory on the Vybrid Tower board. Leave the last * 16MB alone to avoid conflicts with Cortex-M4 firmwares running from diff --git a/include/configs/warp7.h b/include/configs/warp7.h index 83ee1784ce..b3c9f14c8f 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -94,19 +94,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* - * Environment starts at CONFIG_ENV_OFFSET= 0xC0000 = 768k = 768*1024 = 786432 - * - * Detect overlap between U-Boot image and environment area in build-time - * - * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.imx offset - * CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408 - * - * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so - * write the direct value here - */ -#define CONFIG_BOARD_SIZE_LIMIT 785408 - /* environment organization */ #define CONFIG_SYS_FSL_USDHC_NUM 1 |