summaryrefslogtreecommitdiff
path: root/include/lcd.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/lcd.h')
-rw-r--r--include/lcd.h201
1 files changed, 5 insertions, 196 deletions
diff --git a/include/lcd.h b/include/lcd.h
index 160f940d2a..fbba6a27f9 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -41,205 +41,15 @@ int bmp_display(ulong addr, int x, int y);
void lcd_set_flush_dcache(int flush);
#if defined CONFIG_MPC823
-/*
- * LCD controller stucture for MPC823 CPU
- */
-typedef struct vidinfo {
- ushort vl_col; /* Number of columns (i.e. 640) */
- ushort vl_row; /* Number of rows (i.e. 480) */
- ushort vl_width; /* Width of display area in millimeters */
- ushort vl_height; /* Height of display area in millimeters */
-
- /* LCD configuration register */
- u_char vl_clkp; /* Clock polarity */
- u_char vl_oep; /* Output Enable polarity */
- u_char vl_hsp; /* Horizontal Sync polarity */
- u_char vl_vsp; /* Vertical Sync polarity */
- u_char vl_dp; /* Data polarity */
- u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
- u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
- u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */
- u_char vl_clor; /* Color, 0 = mono, 1 = color */
- u_char vl_tft; /* 0 = passive, 1 = TFT */
-
- /* Horizontal control register. Timing from data sheet */
- ushort vl_wbl; /* Wait between lines */
-
- /* Vertical control register */
- u_char vl_vpw; /* Vertical sync pulse width */
- u_char vl_lcdac; /* LCD AC timing */
- u_char vl_wbf; /* Wait between frames */
-} vidinfo_t;
-
+#include <mpc823_lcd.h>
#elif defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \
defined CONFIG_CPU_MONAHANS
-/*
- * PXA LCD DMA descriptor
- */
-struct pxafb_dma_descriptor {
- u_long fdadr; /* Frame descriptor address register */
- u_long fsadr; /* Frame source address register */
- u_long fidr; /* Frame ID register */
- u_long ldcmd; /* Command register */
-};
-
-/*
- * PXA LCD info
- */
-struct pxafb_info {
-
- /* Misc registers */
- u_long reg_lccr3;
- u_long reg_lccr2;
- u_long reg_lccr1;
- u_long reg_lccr0;
- u_long fdadr0;
- u_long fdadr1;
-
- /* DMA descriptors */
- struct pxafb_dma_descriptor * dmadesc_fblow;
- struct pxafb_dma_descriptor * dmadesc_fbhigh;
- struct pxafb_dma_descriptor * dmadesc_palette;
-
- u_long screen; /* physical address of frame buffer */
- u_long palette; /* physical address of palette memory */
- u_int palette_size;
-};
-
-/*
- * LCD controller stucture for PXA CPU
- */
-typedef struct vidinfo {
- ushort vl_col; /* Number of columns (i.e. 640) */
- ushort vl_row; /* Number of rows (i.e. 480) */
- ushort vl_width; /* Width of display area in millimeters */
- ushort vl_height; /* Height of display area in millimeters */
-
- /* LCD configuration register */
- u_char vl_clkp; /* Clock polarity */
- u_char vl_oep; /* Output Enable polarity */
- u_char vl_hsp; /* Horizontal Sync polarity */
- u_char vl_vsp; /* Vertical Sync polarity */
- u_char vl_dp; /* Data polarity */
- u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
- u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
- u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */
- u_char vl_clor; /* Color, 0 = mono, 1 = color */
- u_char vl_tft; /* 0 = passive, 1 = TFT */
-
- /* Horizontal control register. Timing from data sheet */
- ushort vl_hpw; /* Horz sync pulse width */
- u_char vl_blw; /* Wait before of line */
- u_char vl_elw; /* Wait end of line */
-
- /* Vertical control register. */
- u_char vl_vpw; /* Vertical sync pulse width */
- u_char vl_bfw; /* Wait before of frame */
- u_char vl_efw; /* Wait end of frame */
-
- /* PXA LCD controller params */
- struct pxafb_info pxa;
-} vidinfo_t;
-
+#include <pxa_lcd.h>
#elif defined(CONFIG_ATMEL_LCD) || defined(CONFIG_ATMEL_HLCD)
-
-typedef struct vidinfo {
- ushort vl_col; /* Number of columns (i.e. 640) */
- ushort vl_row; /* Number of rows (i.e. 480) */
- u_long vl_clk; /* pixel clock in ps */
-
- /* LCD configuration register */
- u_long vl_sync; /* Horizontal / vertical sync */
- u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
- u_long vl_tft; /* 0 = passive, 1 = TFT */
- u_long vl_cont_pol_low; /* contrast polarity is low */
- u_long vl_clk_pol; /* clock polarity */
-
- /* Horizontal control register. */
- u_long vl_hsync_len; /* Length of horizontal sync */
- u_long vl_left_margin; /* Time from sync to picture */
- u_long vl_right_margin; /* Time from picture to sync */
-
- /* Vertical control register. */
- u_long vl_vsync_len; /* Length of vertical sync */
- u_long vl_upper_margin; /* Time from sync to picture */
- u_long vl_lower_margin; /* Time from picture to sync */
-
- u_long mmio; /* Memory mapped registers */
-} vidinfo_t;
-
+#include <atmel_lcd.h>
#elif defined(CONFIG_EXYNOS_FB)
-
-enum {
- FIMD_RGB_INTERFACE = 1,
- FIMD_CPU_INTERFACE = 2,
-};
-
-enum exynos_fb_rgb_mode_t {
- MODE_RGB_P = 0,
- MODE_BGR_P = 1,
- MODE_RGB_S = 2,
- MODE_BGR_S = 3,
-};
-
-typedef struct vidinfo {
- ushort vl_col; /* Number of columns (i.e. 640) */
- ushort vl_row; /* Number of rows (i.e. 480) */
- ushort vl_width; /* Width of display area in millimeters */
- ushort vl_height; /* Height of display area in millimeters */
-
- /* LCD configuration register */
- u_char vl_freq; /* Frequency */
- u_char vl_clkp; /* Clock polarity */
- u_char vl_oep; /* Output Enable polarity */
- u_char vl_hsp; /* Horizontal Sync polarity */
- u_char vl_vsp; /* Vertical Sync polarity */
- u_char vl_dp; /* Data polarity */
- u_char vl_bpix; /* Bits per pixel */
-
- /* Horizontal control register. Timing from data sheet */
- u_char vl_hspw; /* Horz sync pulse width */
- u_char vl_hfpd; /* Wait before of line */
- u_char vl_hbpd; /* Wait end of line */
-
- /* Vertical control register. */
- u_char vl_vspw; /* Vertical sync pulse width */
- u_char vl_vfpd; /* Wait before of frame */
- u_char vl_vbpd; /* Wait end of frame */
- u_char vl_cmd_allow_len; /* Wait end of frame */
-
- unsigned int win_id;
- unsigned int init_delay;
- unsigned int power_on_delay;
- unsigned int reset_delay;
- unsigned int interface_mode;
- unsigned int mipi_enabled;
- unsigned int dp_enabled;
- unsigned int cs_setup;
- unsigned int wr_setup;
- unsigned int wr_act;
- unsigned int wr_hold;
- unsigned int logo_on;
- unsigned int logo_width;
- unsigned int logo_height;
- int logo_x_offset;
- int logo_y_offset;
- unsigned long logo_addr;
- unsigned int rgb_mode;
- unsigned int resolution;
-
- /* parent clock name(MPLL, EPLL or VPLL) */
- unsigned int pclk_name;
- /* ratio value for source clock from parent clock. */
- unsigned int sclk_div;
-
- unsigned int dual_lcd_enabled;
-} vidinfo_t;
-
-void init_panel_info(vidinfo_t *vid);
-
+#include <exynos_lcd.h>
#else
-
typedef struct vidinfo {
ushort vl_col; /* Number of columns (i.e. 160) */
ushort vl_row; /* Number of rows (i.e. 100) */
@@ -250,8 +60,7 @@ typedef struct vidinfo {
void *priv; /* Pointer to driver-specific data */
} vidinfo_t;
-
-#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_ATMEL_LCD */
+#endif
extern vidinfo_t panel_info;