summaryrefslogtreecommitdiff
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/apm_bios.h2
-rw-r--r--include/linux/compiler.h2
-rw-r--r--include/linux/ioport.h2
-rw-r--r--include/linux/list.h4
-rw-r--r--include/linux/mtd/doc2000.h6
-rw-r--r--include/linux/mtd/flashchip.h1
-rw-r--r--include/linux/mtd/partitions.h10
-rw-r--r--include/linux/mtd/rawnand.h2
-rw-r--r--include/linux/screen_info.h4
-rw-r--r--include/linux/serial_reg.h8
-rw-r--r--include/linux/usb/gadget.h6
11 files changed, 22 insertions, 25 deletions
diff --git a/include/linux/apm_bios.h b/include/linux/apm_bios.h
index 3dabc3f770..32d1401770 100644
--- a/include/linux/apm_bios.h
+++ b/include/linux/apm_bios.h
@@ -34,7 +34,7 @@ struct apm_bios_info {
#define APM_16_BIT_SUPPORT 0x0001
#define APM_32_BIT_SUPPORT 0x0002
#define APM_IDLE_SLOWS_CLOCK 0x0004
-#define APM_BIOS_DISABLED 0x0008
+#define APM_BIOS_DISABLED 0x0008
#define APM_BIOS_DISENGAGED 0x0010
/*
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 98dd3fc4cc..09cea0e95e 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -203,7 +203,7 @@ void __read_once_size(const volatile void *p, void *res, int size)
/*
* We can't declare function 'inline' because __no_sanitize_address confilcts
* with inlining. Attempt to inline it may cause a build failure.
- * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368
+ * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368
* '__maybe_unused' allows us to avoid defined-but-not-used warnings.
*/
# define __no_kasan_or_inline __no_sanitize_address notrace __maybe_unused
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 7129504e05..85288c3729 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -63,7 +63,7 @@ struct resource_list {
#define IORESOURCE_IRQ_HIGHLEVEL (1<<2)
#define IORESOURCE_IRQ_LOWLEVEL (1<<3)
#define IORESOURCE_IRQ_SHAREABLE (1<<4)
-#define IORESOURCE_IRQ_OPTIONAL (1<<5)
+#define IORESOURCE_IRQ_OPTIONAL (1<<5)
/* PnP DMA specific bits (IORESOURCE_BITS) */
#define IORESOURCE_DMA_TYPE_MASK (3<<0)
diff --git a/include/linux/list.h b/include/linux/list.h
index f62afa092c..3eacf68e3a 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -456,7 +456,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* Continue to iterate over list of given type, continuing after
* the current position.
*/
-#define list_for_each_entry_continue(pos, head, member) \
+#define list_for_each_entry_continue(pos, head, member) \
for (pos = list_entry(pos->member.next, typeof(*pos), member); \
prefetch(pos->member.next), &pos->member != (head); \
pos = list_entry(pos->member.next, typeof(*pos), member))
@@ -510,7 +510,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* Iterate over list of given type, continuing after current point,
* safe against removal of list entry.
*/
-#define list_for_each_entry_safe_continue(pos, n, head, member) \
+#define list_for_each_entry_safe_continue(pos, n, head, member) \
for (pos = list_entry(pos->member.next, typeof(*pos), member), \
n = list_entry(pos->member.next, typeof(*pos), member); \
&pos->member != (head); \
diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h
index d57f8da810..a72cb7d20b 100644
--- a/include/linux/mtd/doc2000.h
+++ b/include/linux/mtd/doc2000.h
@@ -54,7 +54,7 @@
#define DoC_Mplus_Configuration 0x100a
#define DoC_Mplus_OutputControl 0x100c
#define DoC_Mplus_FlashControl 0x1020
-#define DoC_Mplus_FlashSelect 0x1022
+#define DoC_Mplus_FlashSelect 0x1022
#define DoC_Mplus_FlashCmd 0x1024
#define DoC_Mplus_FlashAddress 0x1026
#define DoC_Mplus_FlashData0 0x1028
@@ -62,14 +62,14 @@
#define DoC_Mplus_ReadPipeInit 0x102a
#define DoC_Mplus_LastDataRead 0x102c
#define DoC_Mplus_LastDataRead1 0x102d
-#define DoC_Mplus_WritePipeTerm 0x102e
+#define DoC_Mplus_WritePipeTerm 0x102e
#define DoC_Mplus_ECCSyndrome0 0x1040
#define DoC_Mplus_ECCSyndrome1 0x1041
#define DoC_Mplus_ECCSyndrome2 0x1042
#define DoC_Mplus_ECCSyndrome3 0x1043
#define DoC_Mplus_ECCSyndrome4 0x1044
#define DoC_Mplus_ECCSyndrome5 0x1045
-#define DoC_Mplus_ECCConf 0x1046
+#define DoC_Mplus_ECCConf 0x1046
#define DoC_Mplus_Toggle 0x1046
#define DoC_Mplus_DownloadStatus 0x1074
#define DoC_Mplus_CtrlConfirm 0x1076
diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h
index 666480db93..265e89f02b 100644
--- a/include/linux/mtd/flashchip.h
+++ b/include/linux/mtd/flashchip.h
@@ -52,7 +52,6 @@ typedef enum {
} flstate_t;
-
/* NOTE: confusingly, this can be used to refer to more than one chip at a time,
if they're interleaved. This can even refer to individual partitions on
the same physical chip when present. */
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 3822237f2a..0f5a233266 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -21,16 +21,16 @@
* For each partition, these fields are available:
* name: string that will be used to label the partition's MTD device.
* size: the partition size; if defined as MTDPART_SIZ_FULL, the partition
- * will extend to the end of the master MTD device.
+ * will extend to the end of the master MTD device.
* offset: absolute starting position within the master MTD device; if
- * defined as MTDPART_OFS_APPEND, the partition will start where the
+ * defined as MTDPART_OFS_APPEND, the partition will start where the
* previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block;
* if MTDPART_OFS_RETAIN, consume as much as possible, leaving size
* after the end of partition.
* mask_flags: contains flags that have to be masked (removed) from the
- * master MTD flag set for the corresponding MTD partition.
- * For example, to force a read-only partition, simply adding
- * MTD_WRITEABLE to the mask_flags will do the trick.
+ * master MTD flag set for the corresponding MTD partition.
+ * For example, to force a read-only partition, simply adding
+ * MTD_WRITEABLE to the mask_flags will do the trick.
*
* Note: writeable partitions require their size and offset be
* erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 2fba9dc317..3417ca2a0d 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -945,7 +945,7 @@ struct nand_chip {
int jedec_version;
struct nand_onfi_params onfi_params;
struct nand_jedec_params jedec_params;
-
+
struct nand_data_interface *data_interface;
int read_retries;
diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h
index 899fbb487c..46e7fff899 100644
--- a/include/linux/screen_info.h
+++ b/include/linux/screen_info.h
@@ -47,7 +47,7 @@ struct screen_info {
} __attribute__((packed));
#define VIDEO_TYPE_MDA 0x10 /* Monochrome Text Display */
-#define VIDEO_TYPE_CGA 0x11 /* CGA Display */
+#define VIDEO_TYPE_CGA 0x11 /* CGA Display */
#define VIDEO_TYPE_EGAM 0x20 /* EGA/VGA in Monochrome Mode */
#define VIDEO_TYPE_EGAC 0x21 /* EGA in Color Mode */
#define VIDEO_TYPE_VGAC 0x22 /* VGA+ in Color Mode */
@@ -74,7 +74,7 @@ extern struct screen_info screen_info;
#define ORIG_X (screen_info.orig_x)
#define ORIG_Y (screen_info.orig_y)
#define ORIG_VIDEO_MODE (screen_info.orig_video_mode)
-#define ORIG_VIDEO_COLS (screen_info.orig_video_cols)
+#define ORIG_VIDEO_COLS (screen_info.orig_video_cols)
#define ORIG_VIDEO_EGA_BX (screen_info.orig_video_ega_bx)
#define ORIG_VIDEO_LINES (screen_info.orig_video_lines)
#define ORIG_VIDEO_ISVGA (screen_info.orig_video_isVGA)
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index 29c3b5b9a5..061371773c 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -3,7 +3,7 @@
* include/linux/serial_reg.h
*
* Copyright (C) 1992, 1994 by Theodore Ts'o.
- *
+ *
* These are the UART port assignments, expressed as offsets from the base
* register. These assignments should hold for any serial port based on
* a 8250, 16450, or 16550(A).
@@ -88,7 +88,7 @@
#define UART_LCR 3 /* Out: Line Control Register */
/*
- * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
* UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
*/
#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
@@ -257,7 +257,7 @@
*/
#define UART_ASR 0x01 /* Additional Status Register */
#define UART_RFL 0x03 /* Receiver FIFO level */
-#define UART_TFL 0x04 /* Transmitter FIFO level */
+#define UART_TFL 0x04 /* Transmitter FIFO level */
#define UART_ICR 0x05 /* Index Control Register */
/* The 16950 ICR registers */
@@ -288,7 +288,6 @@
#define UART_ACR_ASREN 0x80 /* Additional status enable */
-
/*
* These definitions are for the RSA-DV II/S card, from
*
@@ -384,4 +383,3 @@
#define UART_EXAR_RXTRG 0x0b /* Rx FIFO trigger level write-only */
#endif /* _LINUX_SERIAL_REG_H */
-
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 7e6d329e54..b3f4b8d134 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -160,14 +160,14 @@ struct usb_ep_caps {
* endpoint. It's set once by UDC driver when endpoint is initialized, and
* should not be changed. Should not be confused with maxpacket.
* @max_streams: The maximum number of streams supported
- * by this EP (0 - 16, actual number is 2^n)
+ * by this EP (0 - 16, actual number is 2^n)
* @maxburst: the maximum number of bursts supported by this EP (for usb3)
* @driver_data:for use by the gadget driver. all other fields are
* read-only to gadget drivers.
* @desc: endpoint descriptor. This pointer is set before the endpoint is
- * enabled and remains valid until the endpoint is disabled.
+ * enabled and remains valid until the endpoint is disabled.
* @comp_desc: In case of SuperSpeed support, this is the endpoint companion
- * descriptor that is used to configure the endpoint
+ * descriptor that is used to configure the endpoint
*
* the bus controller driver lists all the general purpose endpoints in
* gadget->ep_list. the control endpoint (gadget->ep0) is not in that list,
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-08 04:03:16 +0300