diff options
Diffstat (limited to 'tools')
-rw-r--r-- | tools/binman/entries.rst | 75 | ||||
-rw-r--r-- | tools/binman/etype/xilinx_bootgen.py | 225 |
2 files changed, 300 insertions, 0 deletions
diff --git a/tools/binman/entries.rst b/tools/binman/entries.rst index f2376932be..e7dfe6b2a3 100644 --- a/tools/binman/entries.rst +++ b/tools/binman/entries.rst @@ -2667,3 +2667,78 @@ may be used instead. +.. _etype_xilinx_bootgen: + +Entry: xilinx-bootgen: Signed SPL boot image for Xilinx ZynqMP devices +---------------------------------------------------------------------- + +Properties / Entry arguments: + - auth-params: (Optional) Authentication parameters passed to bootgen + - fsbl-config: (Optional) FSBL parameters passed to bootgen + - keysrc-enc: (Optional) Key source when using decryption engine + - pmufw-filename: Filename of PMU firmware. Default: pmu-firmware.elf + - psk-key-name-hint: Name of primary secret key to use for signing the + secondardy public key. Format: .pem file + - ssk-key-name-hint: Name of secondardy secret key to use for signing + the boot image. Format: .pem file + +The etype is used to create a boot image for Xilinx ZynqMP +devices. + +Information for signed images: + +In AMD/Xilinx SoCs, two pairs of public and secret keys are used +- primary and secondary. The function of the primary public/secret key pair +is to authenticate the secondary public/secret key pair. +The function of the secondary key is to sign/verify the boot image. [1] + +AMD/Xilinx uses the following terms for private/public keys [1]: + + PSK = Primary Secret Key (Used to sign Secondary Public Key) + PPK = Primary Public Key (Used to verify Secondary Public Key) + SSK = Secondary Secret Key (Used to sign the boot image/partitions) + SPK = Used to verify the actual boot image + +The following example builds a signed boot image. The fuses of +the primary public key (ppk) should be fused together with the RSA_EN flag. + +Example node:: + + spl { + filename = "boot.signed.bin"; + + xilinx-bootgen { + psk-key-name-hint = "psk0"; + ssk-key-name-hint = "ssk0"; + auth-params = "ppk_select=0", "spk_id=0x00000000"; + + u-boot-spl-nodtb { + }; + u-boot-spl-pubkey-dtb { + algo = "sha384,rsa4096"; + required = "conf"; + key-name-hint = "dev"; + }; + }; + }; + +For testing purposes, e.g. if no RSA_EN should be fused, one could add +the "bh_auth_enable" flag in the fsbl-config field. This will skip the +verification of the ppk fuses and boot the image, even if ppk hash is +invalid. + +Example node:: + + xilinx-bootgen { + psk-key-name-hint = "psk0"; + psk-key-name-hint = "ssk0"; + ... + fsbl-config = "bh_auth_enable"; + ... + }; + +[1] https://docs.xilinx.com/r/en-US/ug1283-bootgen-user-guide/Using-Authentication + + + + diff --git a/tools/binman/etype/xilinx_bootgen.py b/tools/binman/etype/xilinx_bootgen.py new file mode 100644 index 0000000000..70a4b2e242 --- /dev/null +++ b/tools/binman/etype/xilinx_bootgen.py @@ -0,0 +1,225 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2023 Weidmueller GmbH +# Written by Lukas Funke <lukas.funke@weidmueller.com> +# +# Entry-type module for Zynq(MP) boot images (boot.bin) +# + +import tempfile + +from collections import OrderedDict + +from binman import elf +from binman.etype.section import Entry_section + +from dtoc import fdt_util + +from u_boot_pylib import tools +from u_boot_pylib import command + +# pylint: disable=C0103 +class Entry_xilinx_bootgen(Entry_section): + """Signed SPL boot image for Xilinx ZynqMP devices + + Properties / Entry arguments: + - auth-params: (Optional) Authentication parameters passed to bootgen + - fsbl-config: (Optional) FSBL parameters passed to bootgen + - keysrc-enc: (Optional) Key source when using decryption engine + - pmufw-filename: Filename of PMU firmware. Default: pmu-firmware.elf + - psk-key-name-hint: Name of primary secret key to use for signing the + secondardy public key. Format: .pem file + - ssk-key-name-hint: Name of secondardy secret key to use for signing + the boot image. Format: .pem file + + The etype is used to create a boot image for Xilinx ZynqMP + devices. + + Information for signed images: + + In AMD/Xilinx SoCs, two pairs of public and secret keys are used + - primary and secondary. The function of the primary public/secret key pair + is to authenticate the secondary public/secret key pair. + The function of the secondary key is to sign/verify the boot image. [1] + + AMD/Xilinx uses the following terms for private/public keys [1]: + + PSK = Primary Secret Key (Used to sign Secondary Public Key) + PPK = Primary Public Key (Used to verify Secondary Public Key) + SSK = Secondary Secret Key (Used to sign the boot image/partitions) + SPK = Used to verify the actual boot image + + The following example builds a signed boot image. The fuses of + the primary public key (ppk) should be fused together with the RSA_EN flag. + + Example node:: + + spl { + filename = "boot.signed.bin"; + + xilinx-bootgen { + psk-key-name-hint = "psk0"; + ssk-key-name-hint = "ssk0"; + auth-params = "ppk_select=0", "spk_id=0x00000000"; + + u-boot-spl-nodtb { + }; + u-boot-spl-pubkey-dtb { + algo = "sha384,rsa4096"; + required = "conf"; + key-name-hint = "dev"; + }; + }; + }; + + For testing purposes, e.g. if no RSA_EN should be fused, one could add + the "bh_auth_enable" flag in the fsbl-config field. This will skip the + verification of the ppk fuses and boot the image, even if ppk hash is + invalid. + + Example node:: + + xilinx-bootgen { + psk-key-name-hint = "psk0"; + psk-key-name-hint = "ssk0"; + ... + fsbl-config = "bh_auth_enable"; + ... + }; + + [1] https://docs.xilinx.com/r/en-US/ug1283-bootgen-user-guide/Using-Authentication + + """ + def __init__(self, section, etype, node): + super().__init__(section, etype, node) + self._auth_params = None + self._entries = OrderedDict() + self._filename = None + self._fsbl_config = None + self._keysrc_enc = None + self._pmufw_filename = None + self._psk_key_name_hint = None + self._ssk_key_name_hint = None + self.align_default = None + self.bootgen = None + self.required_props = ['pmufw-filename', + 'psk-key-name-hint', + 'ssk-key-name-hint'] + + def ReadNode(self): + """Read properties from the xilinx-bootgen node""" + super().ReadNode() + self._auth_params = fdt_util.GetStringList(self._node, + 'auth-params') + self._filename = fdt_util.GetString(self._node, 'filename') + self._fsbl_config = fdt_util.GetStringList(self._node, + 'fsbl-config') + self._keysrc_enc = fdt_util.GetString(self._node, + 'keysrc-enc') + self._pmufw_filename = fdt_util.GetString(self._node, 'pmufw-filename') + self._psk_key_name_hint = fdt_util.GetString(self._node, + 'psk-key-name-hint') + self._ssk_key_name_hint = fdt_util.GetString(self._node, + 'ssk-key-name-hint') + self.ReadEntries() + + @classmethod + def _ToElf(cls, data, output_fname): + """Convert SPL object file to bootable ELF file + + Args: + data (bytearray): u-boot-spl-nodtb + u-boot-spl-pubkey-dtb obj file + data + output_fname (str): Filename of converted FSBL ELF file + """ + platform_elfflags = {"aarch64": + ["-B", "aarch64", "-O", "elf64-littleaarch64"], + # amd64 support makes no sense for the target + # platform, but we include it here to enable + # testing on hosts + "x86_64": + ["-B", "i386", "-O", "elf64-x86-64"] + } + + gcc, args = tools.get_target_compile_tool('cc') + args += ['-dumpmachine'] + stdout = command.output(gcc, *args) + # split target machine triplet (arch, vendor, os) + arch, _, _ = stdout.split('-') + + spl_elf = elf.DecodeElf(tools.read_file( + tools.get_input_filename('spl/u-boot-spl')), 0) + + # Obj file to swap data and text section (rename-section) + with tempfile.NamedTemporaryFile(prefix="u-boot-spl-pubkey-", + suffix=".o.tmp", + dir=tools.get_output_dir())\ + as tmp_obj: + input_objcopy_fname = tmp_obj.name + # Align packed content to 4 byte boundary + pad = bytearray(tools.align(len(data), 4) - len(data)) + tools.write_file(input_objcopy_fname, data + pad) + # Final output elf file which contains a valid start address + with tempfile.NamedTemporaryFile(prefix="u-boot-spl-pubkey-elf-", + suffix=".o.tmp", + dir=tools.get_output_dir())\ + as tmp_elf_obj: + input_ld_fname = tmp_elf_obj.name + objcopy, args = tools.get_target_compile_tool('objcopy') + args += ["--rename-section", ".data=.text", + "-I", "binary"] + args += platform_elfflags[arch] + args += [input_objcopy_fname, input_ld_fname] + command.run(objcopy, *args) + + ld, args = tools.get_target_compile_tool('ld') + args += [input_ld_fname, '-o', output_fname, + "--defsym", f"_start={hex(spl_elf.entry)}", + "-Ttext", hex(spl_elf.entry)] + command.run(ld, *args) + + def BuildSectionData(self, required): + """Pack node content, and create bootable, signed ZynqMP boot image + + The method collects the content of this node (usually SPL + dtb) and + converts them to an ELF file. The ELF file is passed to the + Xilinx bootgen tool which packs the SPL ELF file together with + Platform Management Unit (PMU) firmware into a bootable image + for ZynqMP devices. The image is signed within this step. + + The result is a bootable, signed SPL image for Xilinx ZynqMP devices. + """ + data = super().BuildSectionData(required) + bootbin_fname = self._filename if self._filename else \ + tools.get_output_filename( + f'boot.{self.GetUniqueName()}.bin') + + pmufw_elf_fname = tools.get_input_filename(self._pmufw_filename) + psk_fname = tools.get_input_filename(self._psk_key_name_hint + ".pem") + ssk_fname = tools.get_input_filename(self._ssk_key_name_hint + ".pem") + fsbl_config = ";".join(self._fsbl_config) if self._fsbl_config else None + auth_params = ";".join(self._auth_params) if self._auth_params else None + + spl_elf_fname = tools.get_output_filename('u-boot-spl-pubkey.dtb.elf') + + # We need to convert to node content (see above) into an ELF + # file in order to be processed by bootgen. + self._ToElf(bytearray(data), spl_elf_fname) + + # Call Bootgen in order to sign the SPL + if self.bootgen.sign('zynqmp', spl_elf_fname, pmufw_elf_fname, + psk_fname, ssk_fname, fsbl_config, + auth_params, self._keysrc_enc, bootbin_fname) is None: + # Bintool is missing; just use empty data as the output + self.record_missing_bintool(self.bootgen) + data = tools.get_bytes(0, 1024) + else: + data = tools.read_file(bootbin_fname) + + self.SetContents(data) + + return data + + # pylint: disable=C0116 + def AddBintools(self, btools): + super().AddBintools(btools) + self.bootgen = self.AddBintool(btools, 'bootgen') |