summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-08-18board: T4240rdb: Extend cs4340_get_fw_addr() functionalityKuldeep Singh2-0/+22
T4240RDB supports booting from 2 nor banks(default and altbank). The corresponding defconfig can only have one entry defined and therefore, extend cs4340_get_fw_addr() function to overwrite firmware address which will be later used in cortina firmware. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18board: t208x: Extend cs4340_get_fw_addr() functionalityKuldeep Singh2-0/+23
T2080RDB supports booting from 2 nor banks(default and altbank). The corresponding defconfig can only have one entry defined and therefore, extend cs4340_get_fw_addr() function to overwrite firmware address which will be later used in cortina firmware. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18board: ls2088ardb: Extend cs4340_get_fw_addr() functionalityKuldeep Singh1-0/+38
LS2088A-RDB supports TFA boot source and has 2 nor banks(default and altbank) and QSPI as boot source. The corresponding defconfig can only have one entry defined and therefore, extend cs4340_get_fw_addr() function to overwrite firmware address which will be later used in cortina firmware. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18net: cortina: Add support for tfa boot in cortina firmwareKuldeep Singh1-10/+69
Add support for boards supporting TFA boot separately in cortina firmware. Please note, a weak function is defined to retrieve firmware address values as CONFIG_CORTINA_FW_ADDR is now defined in defconfig and can only have one possible value defined. This weak function will help in overwrting the values to get proper addresses as per boot source. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18configs: Migrate CORTINA_FW_ADDR and CORTINA_FW_LENGTH to KconfigKuldeep Singh21-20/+26
Use moveconfig.py script to convert below defines to Kconfig and move these entries to defconfigs. CONFIG_CORTINA_FW_ADDR CONFIG_CORTINA_FW_LENGTH Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18env: Kconfig: Add default option for PHY_CORTINAKuldeep Singh1-1/+1
Add PHY_CORTINA as default option in SYS_MMC_ENV_DEV Kconfig entry as PHY_CORTINA require SYS_MMC_ENV_DEV value similar to FMAN_ENET or QE. This helps in resolving compilation failure. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18armv8: fsl : create bootcmd and mcinitcmd as per boot sourceWasim Khan1-3/+6
NXP platforms expect custom bootcmd and mcinitcmd to be updated as per boot source with default environment. Check env variable fsl_bootcmd_mcinitcmd_set to prepare bootcmd and mcinitcmd Fixes: cbf77d201870 (armv8: fsl-layerscape: Fix automatic setting of bootmcd with TF-A) Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18board: fsl_validate: Fix resource leak issueKshitiz Varshney1-9/+27
Free dynamically allocated memory before every return statement in calc_img_key_hash() and calc_esbchdr_esbc_hash() function. Verified the secure boot changes using ls1046afrwy board. Signed-off-by: Kshitiz Varshney <kshitiz.varshney@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18board: freescale: t208xrdb: enable Power-On Reset for rev D boardsCamelia Groza2-0/+11
Starting with board revision D, the MISCCSR CPLD register needs to be configured to enable Power-on Reset for software reset commands. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18lx2160a: Enable CONFIG_SPI_FLASH_MT35XU for lx2160a-rdb/qdsKuldeep Singh5-0/+5
LX2160A-RDB/QDS has micron mt35xu512aba flash which requires flag CONFIG_SPI_FLASH_MT35XU on to probe flash successfully. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18board: sl28: drop unneeded and outdated flash partitionsMichael Walle1-55/+0
This board doesn't use the MTD subsystem in u-boot, thus there is no need to specify the partitions. They are outdated anyway. Just drop them. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18arm: Finish migration of HAS_FSL_XHCI_USBTom Rini2-3/+4
This symbol was largely migrated, except for one case. Update it. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18spi: nxp_fspi: Ensure width is respected in spi-mem operationsMichael Walle1-1/+1
Import linux commit 007773e16a6f ("spi: nxp-fspi: Ensure width is respected in spi-mem operations") to fix SPI access on boards which don't have all SPI I/O lines connected to the flash. Since commit 71025f013ccb ("mtd: spi-nor-core: Rework hwcaps selection") u-boot figures out the capabilities by looking at spi_mem_supports_op(). The FlexSPI driver doesn't take the board layout into account. Fix that. Fixes: 383fded70c4f ("spi: nxp_fspi: new driver for the FlexSPI controller") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-17Merge https://source.denx.de/u-boot/custodians/u-boot-tegraTom Rini1-2/+18
2021-08-16board: apalis-tk1: launch toradex easy installer in usb recoveryMarcel Ziswiler1-2/+18
The USB recovery mode is used by Toradex to load the Toradex Easy Installer image which supports further system images installation. Prepare for loading and launching the Toradex Easy Installer if the USB Recovery mode is activated. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-08-16Prepare v2021.10-rc2Tom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-16configs: Resync with savedefconfigTom Rini37-41/+6
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-16Merge https://source.denx.de/u-boot/custodians/u-boot-stmTom Rini37-133/+887
Highlights: - Handle TF-A boot with FIP for STM32MP1 - Fix board_get_usable_ram_top(0) for STM32MP1 - DT alignement with kernel v5.14 for STM32MP1 - SPI-NOR DT update for DHSOM - Add UCLASS API for ECDSA singnature and implement it for STM32MP1
2021-08-16test: dm: Add test for ECDSA UCLASS supportAlexandru Gagniuc3-0/+41
This test verifies that ECDSA_UCLASS is implemented, and that ecdsa_verify() works as expected. The definition of "expected" is "does not find a device, and returns -ENODEV". The lack of a hardware-independent ECDSA implementation prevents us from having one in the sandbox, for now. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-08-16Kconfig: FIT_SIGNATURE should not select RSA_VERIFYAlexandru Gagniuc1-4/+4
FIT signatures can now be implemented with ECDSA. The assumption that all FIT images are signed with RSA is no longer valid. Thus, instead of 'select'ing RSA, only 'imply' it. This doesn't change the defaults, but allows one to explicitly disable RSA support. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-08-16arm: stm32mp1: Implement ECDSA signature verificationAlexandru Gagniuc3-0/+112
The STM32MP ROM provides several service. One of them is the ability to verify ecdsa256 signatures. Hook the ROM API into the ECDSA uclass. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-08-16lib: ecdsa: Implement UCLASS_ECDSA verification on targetAlexandru Gagniuc5-0/+160
Implement the crypto_algo .verify() function for ecdsa256. Because it backends on UCLASS_ECDSA, this change is focused on parsing the keys from devicetree and passing this information to the specific UCLASS driver. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-08-16dm: crypto: Define UCLASS API for ECDSA signature verificationAlexandru Gagniuc2-0/+40
Define a UCLASS API for verifying ECDSA signatures. Unlike UCLASS_MOD_EXP, which focuses strictly on modular exponentiation, the ECDSA class focuses on verification. This is done so that it better aligns with mach-specific implementations, such as stm32mp. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-08-16ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHzMarek Vasut1-1/+1
The SPI NOR is a bit further away from the SoC on DHCOR than on DHCOM, which causes additional signal delay. At 108 MHz, this delay triggers a sporadic issue where the first bit of RX data is not received by the QSPI controller. There are two options of addressing this problem, either by using the DLYB block to compensate the extra delay, or by reducing the QSPI bus clock frequency. The former requires calibration and that is overly complex for SPL, so opt for the second option. This incurs 20ms delay during boot, when SPL loads U-Boot to DRAM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16ARM: stm32: Set environment sector size to 4k on DHSOMMarek Vasut2-2/+2
The DHSOM SPI NOR is using 4k erase blocks, make use of it and define the default environment sector size to 4k. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16arm: dts: stm32mp15: alignment with v5.14Patrick Delaunay3-9/+42
Device tree alignment with Linux kernel v5.14-rc3 - ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 - ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151 - ARM: dts: stm32: add a new DCMI pins group on stm32mp15 - ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7 Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16stm32mp: correctly handle board_get_usable_ram_top(0)Patrick Delaunay1-0/+3
The function board_get_usable_ram_top can be called after relocation with total_size = 0 to get the uppermost pointer that is valid to access in U-Boot. When total_size = 0, the reserved memory should be not take in account with lmb library and 'gd->ram_base + gd->ram_size' can be used. It is the case today in lib/efi_loader/efi_memory.c:efi_add_known_memory() and this patch avoids that the reserved memory for OP-TEE is not part of the EFI available memory regions. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16stm32mp1: stm32prog: remove stm32prog_get_tee_partitions with FIPPatrick Delaunay4-0/+10
The MTD tee partitions used to save the OP-TEE binary are needed when TF-A doesn't use the FIP container to load binaries. This patch puts under CONFIG_STM32MP15x_STM32IMAGE flag the associated code in U-Boot binary and prepare the code cleanup when CONFIG_STM32MP15x_STM32IMAGE support will be removed after TF-A migration to FIP support. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16doc: st: stm32mp1: Add FIP support for trusted bootPatrick Delaunay1-96/+232
TF-A for STM32MP15 now supports the FIP: it is a packaging format which includes the secure monitor, u-boot-nodtb.bin and u-boot.dtb This FIP file is loaded by FSBL = TF-A BL2. This patch updates the board documentation to use this FIP file and no more u-boot.stm32 (with STM32 image header) which is no more generated. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16arm: stm32mp: add defconfig for trusted boot with FIPPatrick Delaunay6-16/+207
Add TF-A FIP support for trusted boot on STM32MP15x, when STM32MP15x_STM32IMAGE is not activated. With FIP support the SSBL partition is named "fip" and its size is 4MB, so the ENV partition name in device tree (for SD card or eMMC) or offset in defconfig (CONFIG_ENV_OFFSET / CONFIG_ENV_OFFSET_REDUND) need to be modified. With FIP the TEE MTD partitions are removed because the OP-TEE binray are included in the FIP containers. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16arm: stm32mp: handle the OP-TEE nodes in DT with FIP supportPatrick Delaunay3-1/+16
With FIP support in TF-A (when CONFIG_STM32MP15x_STM32IMAGE is not activated), the DT nodes needed by OP-TEE are added by OP-TEE firmware in U-Boot device tree, present in FIP. These nodes are only required in trusted boot, when TF-A load the file u-boot.stm32, including the U-Boot device tree with STM32IMAGE header, in this case OP-TEE can't update the U-Boot device tree. Moreover in trusted boot mode with FIP, as the OP-TEE nodes are present in U-Boot device tree only when needed the function stm32_fdt_disable_optee can be removed. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16arm: stm32mp: add config for STM32IMAGE supportPatrick Delaunay4-4/+16
By default for trusted boot with TF-A, U-Boot (u-boot-nodtb) is located in FIP container with its device tree and with the secure monitor (provided by TF-A or OP-TEE). The FIP file is loaded by TF-A BL2 and each components is extracted at the final location. This patch add CONFIG_STM32MP15x_STM32IMAGE to request the STM32 image generation for SOC STM32MP15x when FIP container is not used (u-boot.stm32 is loaded by TF-A as done previously to keep the backward compatibility). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-16clk: stm32mp1: add support of BSEC clockPatrick Delaunay1-0/+1
Add the support of the BSEC clock used by the STM32MP misc driver since the commit 622c956cada0 ("stm32mp: bsec: manage clock when present in device tree") even if this clock is not yet defined in kernel device tree stm32mp151.dtsi. This patch avoids issue for basic boot when this secure clock are not provided by secure world with SCMI. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-15Merge tag 'efi-2021-10-rc2-2' of ↵Tom Rini29-1244/+845
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-10-rc2-2 Documentation: * Require Sphinx >= 2.4.4 for 'make htmldocs' * Move devicetree documentation to restructured text and update it * Document stm32mp1 devicetree bindings UEFI * Extend measurement to UEFI variables and ExitBootServices() * Support Uri() node in devicetree to text protocol * Add Linux magic token to RISC-V EFI test binaries
2021-08-14efi_loader: refactor efi_append_scrtm_version()Masahisa Kojima1-13/+1
Refactor efi_append_scrtm_version() to use common function for adding eventlog and extending PCR. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-08-14efi_loader: add ExitBootServices() measurementMasahisa Kojima3-0/+76
TCG PC Client PFP spec requires to measure "Exit Boot Services Invocation" if ExitBootServices() is invoked. Depending upon the return code from the ExitBootServices() call, "Exit Boot Services Returned with Success" or "Exit Boot Services Returned with Failure" is also measured. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Swap two ifs in efi_exit_boot_services(). efi_tcg2_notify_exit_boot_services must have EFIAPI signature. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-14efi_loader: add boot variable measurementMasahisa Kojima4-1/+162
TCG PC Client PFP spec requires to measure "Boot####" and "BootOrder" variables, EV_SEPARATOR event prior to the Ready to Boot invocation. Since u-boot does not implement Ready to Boot event, these measurements are performed when efi_start_image() is called. TCG spec also requires to measure "Calling EFI Application from Boot Option" for each boot attempt, and "Returning from EFI Application from Boot Option" if a boot device returns control back to the Boot Manager. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-08-14efi_loader: add secure boot variable measurementMasahisa Kojima2-0/+185
TCG PC Client PFP spec requires to measure the secure boot policy before validating the UEFI image. This commit adds the secure boot variable measurement of "SecureBoot", "PK", "KEK", "db", "dbx", "dbt", and "dbr". Note that this implementation assumes that secure boot variables are pre-configured and not be set/updated in runtime. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-08-14efi_loader: add Linux magic to RISC-V crt0Heinrich Schuchardt1-2/+5
Add the Linux magic to the EFI file header to allow running our test programs with GRUB's linux command. MajorImageVersion = 1 indicates a kernel that can consume the EFI_LOAD_FILE2_PROTOCOL. This allows to dump the GRUB provided intird with our initrddump.efi tool. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-14efi_loader: Uri() device path nodeHeinrich Schuchardt2-0/+19
iPXE used Uri() device path nodes. So we should support them in the device path to text protocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-14doc: stm32mp1: add page for device tree bindingsPatrick Delaunay13-893/+69
With device tree binding migration to yaml it is difficult to synchronize the binding from Linux kernel to U-Boot. Instead of maintaining the same dt bindings, this patch adds in the U-Boot documentation the path to the device tree bindings in Linux kernel for STMicroelectronics devices, when they are used without modification. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Add links for referenced text files. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-14doc: Add a note about why devicetree is usedSimon Glass2-0/+42
This question comes up every now and then with people coming from Linux. Add some notes about it so we can point to it in the mailing list. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-14doc: Update devicedocs including how to add tweaksSimon Glass1-81/+100
This file is about 10 years old and the updates have not covered everything that has changed, particularly in the last few years. Update the information and add mention of the u-boot.dtsi files. Signed-off-by: Simon Glass <sjg@chromium.org> Fix typos. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-14doc: Move devicetree control doc to rSTSimon Glass4-25/+43
Move this to rST format, largely unchanged to start with. Add an index for this topic, as well as an empty intro. Note this patch does not include updates! Is it just a conversion to the new format. See the next patch. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchart <xypron.glpk@gmx.de>
2021-08-14doc: fix Latex marginsHeinrich Schuchardt1-12/+19
Adjust the Latex formatting to match Linux v5.13.1: * add Latex margins * reformat the code in doc/conf.py to match Linux Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-14doc: require Sphinx 2.4.4Heinrich Schuchardt2-98/+5
Require Sphinx 2.44 to build the documentation. Remove all code related to earlier versions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-14doc: add pkg-config to the build dependenciesHeinrich Schuchardt1-2/+2
tools/Makefile uses pkg-config. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-13Merge https://source.denx.de/u-boot/custodians/u-boot-x86Tom Rini2-14/+9
- Enable SeaBIOS support for Crown Bay - Update SeaBIOS build instructions in the x86 doc - Enable CONFIG_SPI_FLASH_SMART_HWCAPS for Crown Bay
2021-08-13x86: crownbay: Enable CONFIG_SPI_FLASH_SMART_HWCAPSBin Meng1-1/+0
Now that the spi-nor fix has been made in u-boot/master via: commit 87e7219f9c6a ("mtd: spi-nor: Respect flash's hwcaps in spi_nor_adjust_hwcaps()") enable CONFIG_SPI_FLASH_SMART_HWCAPS on Intel Crown Bay again. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-13doc: x86: Update SeaBIOS build instructionsBin Meng1-13/+8
Update SeaBIOS build instructions using exact command that involves "make olddefconfig", and mention SeaBIOS release 1.14.0 has been used for testing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-18 13:40:34 +0300