summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-07-22rockchip: rock-p-n8/n10: Disable RAM_ROCKCHIP_DEBUGJagan Teki2-0/+2
Disable ram rockchip debug driver for ROCKPi N8/N10 boards since we have verified ram in many instances with respective U-Boot versions. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22arm64: dts: rockchip: Add u-boot, spl-boot-order for ROCKPi N10Jagan Teki1-0/+6
Add u-boot,spl-boot-order for ROCKPi N10, so-that it can able to boot from eMMC and SDMMC in order. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: rock-pi-n10: Enable PCI/NVMEJagan Teki1-0/+3
Enable PCI/NVME for M.2 Slot on RockPI-4 boards. => nvme info Device 0: Vendor: 0x144d Rev: 4L1QCXB7 Prod: S35FNX0J623292 Type: Hard Disk Capacity: 122104.3 MB = 119.2 GB (250069680 x 512) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: rock-pi-n8: Enable on board devicesSuniel Mahesh1-0/+16
Enable common on board devices for ROCKPi N8. - USB 2.0 Host - USB 2.0 OTG/Gadget - HDMI Out Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: evb_rk3288: Add console settingsSuniel Mahesh1-1/+5
Add console settings like stdin, stdout and stderr as usbkbd and vidconsole respectively for evb-rk3288 targets. This would certainly help to detect the attached video devices (like HDMI) and print the console messages on display. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: rock-pi-n10: Enable on board devicesSuniel Mahesh1-0/+21
Enable common on board devices for ROCKPi N10. - USB 2.0 Host - USB 3.0 Host - USB 3.0 Gadget - HDMI Out Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22arm64: dts: rockchip: Add PCIe for RockPI N10Jagan Teki1-2/+38
This patch adds support to enable PCIe for RockPI N10. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22arm: dts: rockchip: Add HDMI out for RockPI N8/N10Jagan Teki3-0/+42
This patch adds support to enable HDMI out for N10 and N8 combinations SBCs. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22ARM: dts: rockchip: Add USB for RockPI N8/N10Jagan Teki3-0/+138
Radxa dalang carrier board has 2x USB 2.0 and 1x USB 3.0 ports. This patch adds support to enable all these USB ports for N10 and N8 combinations SBCs. Note that the USB 3.0 port on RockPI N8 combination works as USB 2.0 OTG since it is driven from RK3288. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22ARM: dts: rockchip: Add usb host0 ohci node for rk3288Jagan Teki1-1/+10
rk3288 and rk3288w have a usb host0 ohci controller. Although rk3288 ohci doesn't actually work on hardware, but rk3288w ohci can work well. So add usb host0 ohci node in rk3288 dtsi and the quirk in ohci platform driver will disable ohci on rk3288. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22arm: dts: rockchip: Sync rk3288 dtsi from linuxSuniel Mahesh1-0/+6
This sync has changes required to use HDMI CEC pin in U-Boot. Sync dts from linux v5.8-rc5 commit: "ARM: dts: rockchip: define the two possible rk3288 CEC pins" (sha1: 838980dd04e994bf81cf104fa01ae60802146b39) Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-07-22ARM: dts: rockchip: Sync ROCKPi N8/N10 dts(i) from LinuxJagan Teki5-136/+104
Sync ROCKPi N8/N10 dts(i) changes from Linux. commit <afd9eb880414> ("ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support") Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-07-22rockchip: roc-rk3399-pc: Set LED only during POR and pwr_key=yJagan Teki3-4/+42
ROC-RK3399-PC has specific set of configurations for on-board led setup. Due to easiness for user to know the state of the board roc-rk339-pc board code will setup the low power led on/off, and waiting for user to press power key and then glow full power led. All this needs to happen only during power-on-reset not for soft reset or WDT. Also, it is not a proper usage to ask the user to press the Power key if the board connected remotely, so add the environment variable 'pwr_key' to check as well. So, user need to press Power key only - during POR - pwr_key=y Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: Separate the reset cause from display cpuinfoJagan Teki3-9/+18
reset cause is a generic functionality based on the soc cru registers in rockchip. This can be used for printing the cause of reset in cpuinfo or some other place where reset cause is needed.  Other than cpuinfo, reset cause can also be using during bootcount for checking the specific reset cause and glow the led based on the reset cause. So, let's separate the reset cause code from cpuinfo, and add a check to build it for rk3399, rk3288 since these two soc are supporting reset cause as of now. Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: Don't clear the reset status regJagan Teki2-7/+0
reset reason can be used several stages of U-Boot bootloader like SPL, U-Boot proper based on the requirements. Clearing the status register end of get_reset_cause will end up showing the wrong reset cause when it read the second time. For example, if board resets, SPL reads the reset status as RST whereas U-Boot proper reads the status as POR. However, based on the latest testing clearing reset status won't be required for determine the last reset cause or following resets. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: tpl: Remove board_early_init_f()Kever Yang1-7/+0
There is no need for board_early_init_f() in TPL, anything like this should goes to SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: roc-rk3399-pc: Add custom led_setup()Jagan Teki3-9/+5
roc-rk3399-pc has some specific requirements to support LEDS, environment. board detection and etc prior to U-Boot proper. So as of now SPL would be a better stage for these custom board requirements to support unlike TPL. Adding few of these custom requirements like LEDS in TPL would require extra code pulling and also the size of TPL can grow. So, this patch moves the leds code from TPL into SPL Board init led_setup code. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> (split tpl.c change as separate patch) Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: rk3399: Add weak led_setup()Jagan Teki1-0/+6
Add weak led_setup() so that board which has an uncommon led setup code that can make use of custom implementation. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: rk3288: Add OF board setupJagan Teki2-0/+31
The new rk3288 revision rk3288w has some changes with respect to legacy rk3288 like hclk_vio in cru and usb host0 ohci. Linux clock driver already handle this via rockchip,rk3288w-cru compatible. USB ohci host can enable via dts for rk3288w based boards. So, add fdt board setup code to update cru compatible with rk3288w-cru compatible if the SOC revision is RK3288W. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: Add rk3288 SoC detection helperJagan Teki1-0/+49
Rockchip SoC's has a new revision chip for rk3288 SoCs. RK3288 has a new revision chip called RK3288W which is similar but different hclk_vio clock and fixed OHCI host. Add common Rockchip SoC detection helper to support this rk3288w detection. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22arm64: dts: rockchip: Add Radxa ROCK Pi 4C supportJagan Teki5-0/+134
Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled GPIO pin change compared to 4B, 4C. So, add or enable difference nodes/properties in 4C dts by including common dtsi. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22arm64: dts: rockchip: Add ROCKPi 4A/4B supportJagan Teki6-29/+65
Rock PI 4 has 3 variants of hardware platforms called RockPI 4A, 4B, and 4C. - Rock PI 4A has no Wif/BT. - Rock PI 4B has AP6256 Wifi/BT, PoE. - Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enable GPIO pin change compared to 4B, 4C So move common nodes, properties into dtsi file and include on respective variant dts files. Use 4B dts into default rock-pi-4 defconfig until we find any solution for dynamic detection of these variants. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: firefly-rk3399: enable CONFIG_USB_DWC3Kever Yang1-1/+3
To fix below build error: drivers/usb/host/built-in.o: In function `xhci_dwc3_remove': drivers/usb/host/xhci-dwc3.c:174: undefined reference to `dwc3_shutdown_phy' drivers/usb/host/built-in.o: In function `xhci_dwc3_probe': drivers/usb/host/xhci-dwc3.c:130: undefined reference to `dwc3_setup_phy' Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: rk3399: Add default env to support compressed kernel ImageKever Yang1-1/+3
Add default kernel_comp_addr_r and kernel_comp_size to support boot from compressed kernel Image, this space is temporarily used during decompress according to README.distro. Reported-by: Tian Yuanhao <tianyuanhao@aliyun.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: sdram: fix dram_init_banksizeAlex Bee1-4/+2
Currently 2.5 GB is calculated as DRAM size for a 1 GB RK322x board if CONFIG_SPL_OPTEE is set. This is troublesome when booting a linux kernel since this size will be injected in FDT of the kernel. gd->bd->bi_dram[0].start (which is basically CONFIG_SYS_SDRAM_BASE) must not be taken into consideration for calculation of second bank size, since this offset is already included in calculation of "top". After applying this patch 992 MB (1024 MB - 32 MB reserved for optee-os) is correctly calculated and has also been verified on 2 GB boards. Signed-off-by: Alex Bee <knaerzche@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22pci: rockchip: Drop legacy PHY driverJagan Teki4-354/+74
Drop the legacy PHY driver and it's associated code since the PHY handling driver now part of Generic PHY framework. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22pci: rockchip: Switch to generic-phyJagan Teki3-10/+16
Now, we have a PCIe PHY driver as part of the Generic PHY framework. Let's use it instead of legacy PHY driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22phy: Add Rockchip PCIe PHY driverJagan Teki3-0/+279
Add the Rockchip PCIe PHY driver as part of Generic PHY framework. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: roc-rk3399-pc: Disable RAM_ROCKCHIP_DEBUGJagan Teki2-0/+2
Disable ram rockchip debug driver for roc-rk3399-pc boards since we have verified ram in many instances with respective U-Boot versions. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: ram: fix debug funcfion define when RAM_ROCKCHIP_DEBUG not setKever Yang2-15/+13
The empty function define should not be in the header file, or else the build will error with function multi definition after CONFIG_RAM_ROCKCHIP_DEBUG is disabled. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22ram: rk3399: Mark existing prints via RAM_ROCKCHIP_DEBUGJagan Teki1-4/+8
Right now all these debug statements are printing on the console to make sure proper dram initialization happens.   Mark them into RAM_ROCKCHIP_DEBUG would be more meaningful and work like before since the RAM_ROCKCHIP_DEBUG is by default yet. No functionality changes. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22ram: rk3399: Drop debug stride in driverJagan Teki1-25/+0
stride debug is already present in sdram_common.c via RAM_ROCKCHIP_DEBUG. So, drop the redundant debug stride code in rk3399 driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: rock64-rk3328_defconfig: Add SPI Flash supportJohannes Krottmayer1-0/+2
Add U-Boot SPI Flash support for the PINE64 Rock64 board Signed-off-by: Johannes Krottmayer <krjdev@gmail.com> Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22ARM: dts: rk3328-rock64: Add SPI Flash supportJohannes Krottmayer1-0/+6
Add U-Boot SPI Flash support for the PINE64 Rock64 board Signed-off-by: Johannes Krottmayer <krjdev@gmail.com> Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22ARM: dts: rk3328: Add SPI supportJohannes Krottmayer1-0/+5
Add U-Boot SPI support for the RK3328 Signed-off-by: Johannes Krottmayer <krjdev@gmail.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> (fix checkpatch error for code ident) Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22drivers: spi: rk_spi: Add support for RK3328Johannes Krottmayer1-0/+2
Add support for the RK3328 SPI controller Signed-off-by: Johannes Krottmayer <krjdev@gmail.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22drivers: clk: rockchip: clk_rk3328: Add SPI supportJohannes Krottmayer1-0/+31
Add SPI support for the RK3328 clock driver Signed-off-by: Johannes Krottmayer <krjdev@gmail.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: roc-rk3399-pc: Update ENV offset, sizeJagan Teki2-4/+4
Adjust the ENV offset, size to fit into all images on 16MB flash. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: roc-rk3399-pc: Enable USB GadgetJagan Teki2-0/+6
Enable DWC3 core, gadget for roc-rk3399-pc board. This would help to use fastboot by default. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: rock-pi-4: Enable HDMI outputJagan Teki1-0/+5
Enable config options to get HDMI output on RockPI-4 boards. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: rock-pi-4: Enable USB GadgetJagan Teki1-0/+2
Enable USB gadget for rock-pi-4 boards. This would help to use fastboot by default. Note: Connect the Host USB cable (Port A or C) to rock-pi-4 Upper USB 3.0 port. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: rock-pi-4: Enable PCI/NVMEJagan Teki1-0/+3
Enable PCI/NVME for M.2 Slot on RockPI-4 boards. => nvme info Device 0: Vendor: 0x144d Rev: 2B2QEXM7 Prod: S4EUNG0MC10012Y Type: Hard Disk Capacity: 238475.1 MB = 232.8 GB (488397168 x 512) Cc: Tom Cubie <tom@radxa.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: rock-pi-4: Enable USB3 HostJagan Teki1-0/+6
Enable USB3.0 Host support for RockPI-4 boards. Note that the Upper USB3.0 port is marked as otg and lower USB3.0 port marked as host, so this below log capture when USB3.0 mass storage plug in at lower USB 3.0 port. Log: Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning bus dwc3 for devices... cannot reset port 1!? 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Mass Storage (5 Gb/s, 224mA) SanDisk Dual Drive 040130e3ee554b7078843f4eb331646 Cc: Tom Cubie <tom@radxa.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: rockpro64: Enable USB3.0 HostJagan Teki1-0/+4
Enable USB3.0 Host support for RockPro64 boards. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: board: add Hardkernel Odroid Go2 boardHeiko Stuebner8-0/+244
Also known as Odroid Go Advance but named Go2 internally by the vendor it seems. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: px30: sync Odroid Go Advance devicetree from LinuxHeiko Stuebner2-1/+718
Get the devicetree from mainline Linux and include it for U-Boot uses. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: px30: sync the main rk3326 dtsi from mainlineHeiko Stuebner1-0/+15
The rk3326 is just a trimmed down px30 from a software perspective, so the mainline rk3326 dtsi also ist just a tiny addition. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-17Merge branch '2020-07-17-misc-fixes'Tom Rini684-1022/+1104
A large number of assorted fixes, including but not limited to: - Correct fixdep and CONFIG_IS_ENABLED(...) - lz4 on big endian - Assorted LMB hardening - Remove bd_t typedef
2020-07-17include: pci_ids: Add Cavium devicesSuneel Garapati1-0/+18
Add VendorID and DeviceID for supported devices on OcteonTX/TX2 platforms. Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-07-17doc: fit: Write hex address as hex instead of intMichal Simek1-1/+1
When update_uboot.its is used directly there is syntax error for no reason. Error report: mkimage -f update_uboot.its boot Error: update_uboot.its:18.12-13 syntax error FATAL ERROR: Unable to parse input tree mkimage: Can't read boot.tmp: Invalid argument Fixes: 4bae90904b69 ("Automatic software update from TFTP server") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-05 05:35:46 +0300