summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-09-13Merge branch 'CR_5472_uboot_mmc0_log_keith.zhao' into 'jh7110-master'andy.hu1-3/+0
CR 5472 vout: logo: emmc log show many times See merge request sdk/u-boot!69
2023-09-11drivers: pci: Update reset & link wait timing as spec required.Kevin.xie1-4/+45
1. Modified reset assert duration to 100ms. 2. Wait 10-100 ms for link training. 3. If link is up, delay 100ms before doing any configuration space access. Reference spec: PCIe Base Spec r6.0 & CEM 2.0. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2023-09-11riscv: dts: Add link state register to PCIe syscon nodes.Kevin.xie1-2/+2
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2023-09-11cmd: fastboot: Fix failure to enter fastbootXingyu Wu1-2/+2
Only USB host and device are same IP and should be changed mode with initialization before fastboot in Devkits. Add the target of Devkits to math the board. Fixes: 67df54127e38 ("cmd: fastboot: Add presetting on StarFive SoC before fastboot") Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
2023-09-08vout: logo: emmc log show many timesKeith Zhao1-3/+0
the vout clocks on enable status, when no connecters (hdmi or mipi) this will cause emmc init many times need to closed the vout clocks Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
2023-09-07Merge branch 'CR_4615_add_fastboot_Xingyu.Wu' into 'jh7110-master'andy.hu10-1/+167
CR_4615_add_fastboot_Xingyu.Wu See merge request sdk/u-boot!68
2023-09-07common: autoboot: Add auto-fastboot on StarFive SoCXingyu Wu4-1/+75
Add auto-fastboot function before autoboot on StarFive SoC and add a config to enable or disable this. In the auto-fastboot, it check a environment flag of 'fb_sf_completed' first. The flag is NULL and then the fastboot will work. The flag will be set from USB tool to indicate done after flashing the image. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
2023-09-07cmd: fastboot: Add presetting on StarFive SoC before fastbootXingyu Wu1-0/+8
Add the presetting about usb as device in fastboot function. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
2023-09-07drivers: fastboot: Fix the error of writing sparse file with fastbootXingyu Wu3-0/+18
Add config for max block size to write in MMC with sparse file. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
2023-09-07drivers: fastboot: Add logical-block-size in getvar commandXingyu Wu2-0/+19
Add a new parameter to get "logical-block-size" in getvar command. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
2023-09-07driver: fastboot: Add new flag to load image file without partitionXingyu Wu1-0/+47
Add new flag to load image file to preset address without partition. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
2023-09-06Merge branch 'CR_7250_add_usb_device_in_u_boot_minda' into 'jh7110-master'andy.hu3-2/+62
CR_7250 usb: cdns: Add USB device support See merge request sdk/u-boot!67
2023-09-05dts: usb: Add starfive,usb2-only to zeroMinda Chen1-0/+1
Add starfive,usb2-only to zero in evb board. Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
2023-08-31usb: cdns: Add USB device supportMinda Chen2-2/+61
Add USB device support. Add dr_num_mode for changing the dr mode number, For changing the strings cause issues. For devkits, If using device, need to changed starfive,usb2-only to 1 and dr_num_mode to 2. Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
2023-08-30Merge branch 'CR_7199_add_usb_host_minda' into 'jh7110-master'andy.hu3-13/+246
CR_7199 usb: cdns3: starfive: Add usb driver to support for JH7110 See merge request sdk/u-boot!66
2023-08-30Merge branch 'CR_7136_fix_usb_device_xfer_timeout_minda' into 'jh7110-master'andy.hu1-4/+6
CR_7136 usb: cdns3: Set the SS EP config bit by usb SS speed See merge request sdk/u-boot!65
2023-08-25dts: usb: Add USB 3.0 clock dts.Minda Chen1-0/+15
Add evb USB 3.0 clock dts. Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
2023-08-25dts: starfive: devkits: Update usb device tree nodeYanhong Wang1-4/+8
Updated USB Device Tree Node to support USB Device functionality and is consistent with Kernel. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
2023-08-25usb: cdns3: starfive: Add usb driver to support for JH7110Yanhong Wang1-9/+223
Add usb driver to support for jh7110. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
2023-08-23usb: cdns3: Set the SS EP config bit by usb SS speedMinda Chen1-4/+6
Set SS EP config bit by USB SS speed. Avoid transfer timeout. Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
2023-08-16Merge branch 'CR_6370_nvme_sd_boot_samin.guo' into 'jh7110-master'andy.hu3-18/+131
CR6370： riscv: starfive: evb: Optimize boot logic（sd/nvme） See merge request sdk/u-boot!64
2023-08-16riscv: starfive: jh7110-evb: Optimize boot commandsSamin Guo1-1/+2
- Optimize boot commands for jh7110-evb - Add CONFIG_DEFAULT_FDT_FILE for debian boot Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-08-16riscv: starfive: evb: add get_boot_modeSamin Guo1-0/+8
add get_boot_mode function to support Multi-device boot Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-08-16riscv: starfive: evb: Add EVB_SDK_BOOTENVSamin Guo1-0/+10
Add BOOTENV for jh7110 evb Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-08-16riscv: starfive: jh7110: Add JH7110_XX_BOOTENSamin Guo1-0/+111
Add JH7110_DISTRO_BOOTEN/JH7110_SDK_BOOTEN for debian/sdk boot on JH7110 SOC. Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-08-16riscv: starfive: evb: remove unused bootenvSamin Guo1-17/+0
will be replaced by the new bootenv Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-07-28Merge branch 'CR_6806_MMC_evb_william.qiu' into 'jh7110-master'andy.hu2-0/+13
CR_6806: spl: starfive: modify driver strength and slew rate See merge request sdk/u-boot!63
2023-07-28riscv: dts: starfive: limit cclk_in frequencyWilliam Qiu1-0/+2
The frequency of cclk_in is limited to 50M, so that it does not do internal part frequency and goes by-pass mode. And delete syscon node. Signed-off-by: William Qiu <william.qiu@starfivetech.com>
2023-07-28spl: starfive: modify driver strength and slew rateWilliam Qiu1-0/+11
Set eMMC/sd clk's DR to 2 and set its SR to 1. Signed-off-by: William Qiu <william.qiu@starfivetech.com>
2023-07-26Merge branch 'CR_6570_SDBOOT_u-boot_william.qiu' into 'jh7110-master'andy.hu4-2/+113
CR_6570: mmc: starfive: add HS200 support See merge request sdk/u-boot!62
2023-07-26defconfig: starfive: enable HS200 supportWilliam Qiu1-0/+2
enable HS200 support. Signed-off-by: William Qiu <william.qiu@starfivetech.com>
2023-07-26gpio: starfive: Add SET_DS/SET_PULL/SET_SLEW supportSamin Guo1-1/+23
SET_DS/SET_PULL/SET_SLEW can configure the properties of the GPIO Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-07-26Merge branch 'CR_6728_multi_pcis_minda' into 'jh7110-master'andy.hu1-8/+8
CR_6728 pci: Get te correct config addr to support multi PCI See merge request sdk/u-boot!61
2023-07-26mmc: starfive: fix mmc device power-up sequenceWilliam Qiu2-0/+27
fix mmc device power-up sequence. Signed-off-by: William Qiu <william.qiu@starfivetech.com>
2023-07-26mmc: starfive: add HS200 supportWilliam Qiu2-1/+61
Add tuning and other related code to the driver to support HS200 mode. Signed-off-by: William Qiu <william.qiu@starfivetech.com>
2023-07-26pci: Getw correct config addr to support multi PCIMinda Chen1-8/+8
subtract the root bus number to get the correct config addr. Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
2023-07-20Merge branch 'CR6648_dram_init_smain.guo' into 'jh7110-master'andy.hu3-3/+7
CR_6648: board: starfive: evb: use dram_init in spl See merge request sdk/u-boot!60
2023-07-20board: starfive: evb: use dram_init in splSamin Guo3-3/+7
dram_init call fdtdec_setup_mem_size_base, so starfive_ddr.c do not need it. Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-07-20Merge branch 'CR_6604_1G_DDR_SYNC_samin.guo' into 'jh7110-master'andy.hu9-108/+2809
CR6604：dram: jh7110: sync from devkits/vf2 See merge request sdk/u-boot!59
2023-07-19Merge branch 'CR_6572_evb_uboot_hdmi_blank_panel_keith.zhao' into ↵andy.hu5-12/+176
'jh7110-master' CR 6572 uboot: hdmi logo causes kernel hdmi unstable See merge request sdk/u-boot!58
2023-07-19board: starfive: evb: Add dynamic CMA adjustment schemeSamin Guo2-0/+46
Synchronize from vf2 to the dynamic CMA scheme Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-07-19dram: starfive: jh7110: Add ddr4 supportSamin Guo6-68/+2706
Add ddr4 tuning support (sync from devkits) Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-07-19board: starfive: evb: Add resize-ddr functionSamin Guo1-0/+47
Add board-level resize-DDR function for evb Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-07-18riscv: dts: starfive: jh7110: replace mipi&hdmi nodeKeith Zhao1-4/+4
replace mipi&hdmi node , hdmi logo will start begin mipi Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
2023-07-18uboot: hdmi logo causes kernel hdmi unstableKeith Zhao4-8/+172
The hdmi display is unstable after repeated reset blank panel or write panel Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
2023-07-18dram: jh7110: remove resize-ddr functionSamin Guo1-40/+10
The resize-ddr should be board-level code Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-07-12Merge branch 'CR_5623_1GDDR_samin.guo' into 'jh7110-master'andy.hu7-52/+118
CR5623： Add 1G DDR support && Simplify the command of uboot to load Linux See merge request sdk/u-boot!57
2023-07-10borad: starfive: evb: Synchronize environment variables from vf2Samin Guo1-0/+4
loadaddr fdtoverlay_addr_r kernel_comp_addr_r/kernel_comp_size Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-07-10borad: starfive: evb: Resize the address spaceSamin Guo1-20/+8
Readjust the address space for 1G DDR Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-07-10riscv: jh7110: add spi nor flash SPI_FLASH_MACRONIX supportSamin Guo1-0/+1
Radxa uses macronix spi flash, so enable it. Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-06-28 00:26:58 +0300