summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-10-31image: Allow loading a FIT image for a particular phaseSimon Glass3-15/+86
Add support for filtering out FIT images by phase. Rather than adding yet another argument to this already overloaded function, use a composite value, where the phase is only added in if needed. The FIT config is still selected (and verified) as normal, but the images are selected based on the phase. Tests for this come in a little later, as part of the updated VPL test. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31image: Add the concept of a phase to FITSimon Glass5-2/+130
We want to be able to mark an image as related to a phase, so we can easily load all the images for SPL or for U-Boot proper. Add this to the FIT specification, along with some access functions. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31sandbox: Add a way to specify the sandbox executableSimon Glass2-1/+32
At present the sandbox executable is assumed to be arg[0] but this only works for a single jump (e.g. from SPL to U-Boot). Add a new arg to solve this issue, along with a detailed comment. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31sandbox: Generalise SPL bootingSimon Glass3-12/+33
At present sandbox only supports jumping to a file, to get to the next U-Boot phase. We want to support other methods, so update the code to use an enum for the method. Also use the Use board_boot_order() to set the order, so we can add more options. Also add the MMC methods into the BOOT_DEVICE enum so that booting from MMC can be supported. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31image: Move comment for fit_conf_find_compat()Simon Glass2-43/+41
Move this comment to the header file, where the APIs should be defined. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31sandbox: Drop message about writing sandbox stateSimon Glass1-1/+1
This happens every time sandbox moves to the next phase so is not very interesting. Display the message only when debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2022-10-31dm: mmc: Allow sandbox emulator to build without writesSimon Glass1-2/+8
When MMC_WRITE is disabled this driver produced a build error. Fix this. Also update a comment while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-10-31dm: blk: mmc: Tidy up some Makefile rules for SPLSimon Glass4-4/+3
Use the correct SPL_TPL_ variable so that these features can be enabled in TPL and VPL as needed. Disable it by default in TPL to avoid any code-size increase. No boards are actually using it since the Makefile rules don't allow including drivers/block/ with TPL_DM enabled. It can be manually enabled as needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-10-31bloblist: Drop debuggingSimon Glass1-1/+0
Disable debugging by default since this implementation is stable now. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31usb: Update the test to cover reading and writingSimon Glass5-9/+80
Add test coverage for blk_write() as well. The blk_erase() is not tested for now as the USB stor interface does not support erase. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31dm: blk: Add udevice functionsSimon Glass3-21/+80
At present we have functions called blk_dread(), etc., which take a struct blk_desc * to refer to the block device. Add some functions which use udevice instead, since this is more in keeping with how driver model is supposed to work. Update one of the tests to use this. Note that it would be nice to update the functions in disk-uclass.c to use these new functions. However they are not quite the same. For example, disk_blk_read() adds the partition offset to 'start' when calling the cache read/fill functions, but does not with part_blk_read(), which does the addition itself. So as designed the code is duplicated. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31disk: Rename block_dev to descSimon Glass1-19/+19
The use of 'block_dev' in this context is confusing, since it is not a pointer to a device, just to some information about it. Rename this to 'desc', as is more commonly used, since it is a block descriptor. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heinrich Schuchardt <xypron.glplk@gmx.de>
2022-10-31disk: Rename block functionsSimon Glass3-20/+52
Use the uclass type as the first part of the function name, to be consistent with the methods in other block drivers. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31bootstd: Add a way to set up a bootflowSimon Glass4-8/+23
Add a function to init a bootflow, to reduce code duplication. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31test: Support tests which can only be run manuallySimon Glass8-8/+86
At present we normally write tests either in Python or in C. But most Python tests end up doing a lot of checks which would be better done in C. Checks done in C are orders of magnitude faster and it is possible to get full access to U-Boot's internal workings, rather than just relying on the command line. The model is to have a Python test set up some things and then use C code (in a unit test) to check that they were done correctly. But we don't want those checks to happen as part of normal test running, since each C unit tests is dependent on the associate Python tests, so cannot run without it. To acheive this, add a new UT_TESTF_MANUAL flag to use with the C 'check' tests, so that they can be skipped by default when the 'ut' command is used. Require that tests have a name ending with '_norun', so that pytest knows to skip them. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31test: Update tests to use the skip featureSimon Glass5-17/+29
Some tests currently return 0 when they want to be skipped. Update them to return -EAGAIN instead, so they are counted as skipped. A few tests are in two parts, with the latter part being skipped in certain situations. Split these into two and use the correct condition for the second part. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31test: Report skippped testsSimon Glass2-3/+22
At present it is possible for a test to skip itself by returning -EAGAIN but this is not recorded. An existing example is in test_pre_run() with the "Console recording disabled" check. Keep a track of skipped tests and report the total at the end. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2022-10-31binman: Support writing symbols into ELF filesSimon Glass8-12/+151
In some cases the ELF version of SPL builds may be packaged, rather than a binary .bin file. Add support for this. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31binman: Handle writing ELF symbols in the Entry classSimon Glass8-34/+21
This feature is used by several etypes and we plan to add more that use it. Make symbol writing a feature of the base class to reduce the code duplication. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31binman: Split out looking up a symbol into a functionSimon Glass1-15/+45
Move this code into its own function so it can be used from tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31binman: Allow obtaining a symbol valueSimon Glass1-8/+45
Provide a function to obtain the integer value of an ELF symbol. This will be used Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31spl: Add a separate silence option for SPLSimon Glass2-1/+23
Add an option to allow silent console to be controlled separately in SPL, so that boot progress can be shown. Disable it by default for sandbox since it is useful to see what is going on there. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31spl: Refactor controls for console outputSimon Glass1-3/+1
The expression in boot_from_devices() is fairly long and appears to be an artefact from before we could easily call printf(...) and have the call be nop'd out. So update it to just check CONFIG_SILENT_CONSOLE. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com>
2022-10-31spl: Use binman suffix allow symbols of any SPL etypeSimon Glass2-12/+12
At present we use symbols for the u-boot-spl entry, but this is not always what we want. For example, sandbox actually jumps to a u-boot-spl-elf entry, since sandbox executables are ELF files. We already handle this with U-Boot by using the '-any' suffix. Add it for SPL as well. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31disk: Drop debug messages in part_efiSimon Glass1-78/+72
This is monstrously verbose when something goes wrong. It should work by recording the problem and reporting it (once) at the command level. At present it sometimes outputs hundreds of lines of CRC mismatches. For now, just silence it all. GUID Partition Table Entry Array CRC is wrong: 0xaebfebf2 != 0xc916f712 find_valid_gpt: *** ERROR: Invalid GPT *** find_valid_gpt: *** Using Backup GPT *** GUID Partition Table Entry Array CRC is wrong: 0xaebfebf2 != 0xc916f712 find_valid_gpt: *** ERROR: Invalid GPT *** find_valid_gpt: *** Using Backup GPT *** ... While we are error, remove the '*** ERROR: ' text as it is already clear that this is unexpected Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2022-10-31Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASESimon Glass1118-1267/+1632
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-31Merge branch '2022-10-31-broadcom-updates'Tom Rini136-1519/+3721
- Update / add a large number of Broadcom BCA SoCs.
2022-10-31timer: bcmbca: use arm global timer for bcm63138 SoCWilliam Zhang1-1/+1
As STI timer is renamed to ARM A9 global timer, change BCM63138 to use the new global timer config symbol name. This patch applies on top of the my previous patch [1]. [1]: https://lists.denx.de/pipermail/u-boot/2022-August/491060.html Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-10-31timer: sti: convert sti-timer to arm a9 global timerWilliam Zhang4-19/+23
STI timer is actually ARM Cortex A9 global timer. Convert the driver to use generic global timer name and make it consistent with Linux kernel global timer driver. This also allows any A9 based device to use this driver. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-10-31arm: bcmbca: replace ARCH_BCM6753 symbols in Kconfig with BCM6855William Zhang4-4/+4
As CONFIG_ARCH_BCM6753 is replaced with CONFIG_BCM6855, update the driver Kconfig to use the new config symbol. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: remove bcm6753 support under CONFIG_ARCH_BCM6753William Zhang12-407/+146
BCM6753 is essentially same as the main chip BCM6855 but with different SKU number. Now that BCM6855 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6855, remove the original ARCH_BCM6753 support and migrate its configuration and dts settings. This includes: - Remove the bcm96753ref board folder. It is replaced by the generic bcmbca board folder. - Merge the 6753.dtsi setting to the new 6855.dtsi file. Update 96753ref board dts with the new compatible string. - Delete broadcom_bcm96763ref.h and merge its setting to the new bcm96855.h file. - Delete bcm96753ref_ram_defconfig and use a basic config version of bcm96855_defconfig Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: add bcm6855 SoC support under CONFIG_ARCH_BCMBCAWilliam Zhang11-0/+228
BCM6855 is a Broadcom ARM A7 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under CONFIG_BCM6855 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL101 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: replace ARCH_BCM6858 symbols in Kconfig with BCM6858William Zhang5-8/+5
As CONFIG_ARCH_BCM6858 is replaced with CONFIG_BCM6858, update the driver Kconfig to use the new config symbol. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: remove bcm6858 support under CONFIG_ARCH_BCM6858William Zhang10-195/+8
Now that BCM6858 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6858, remove the original ARCH_BCM6858 support and migrate its configuration and dts settings. This includes: - Remove the bcm968580xref board folder. It is replaced by the generic bcmbca board folder. - Update bcm968580xref board dts with the new compatible string. - Delete broadcom_bcm968580xref.h and merge its setting to the new bcm96858.h file. - Remove bcm968580xref_ram_defconfig as a basic config version of bcm96858_defconfig is now added. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: add bcm6858 SoC support under CONFIG_ARCH_BCMBCAWilliam Zhang12-79/+258
BCM6858 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under CONFIG_BCM6858 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and the original dts is updated with the one from linux next git repository. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: replace ARCH_BCM68360 symbols in Kconfig with BCM6856William Zhang5-5/+5
As CONFIG_ARCH_BCM68360 is replaced with CONFIG_BCM6856, update the driver Kconfig to use the new config symbol. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: remove bcm68360 support under CONFIG_ARCH_BCM68360William Zhang12-413/+159
BCM68360 is a variant within the BCM6856 chip family. Now that BCM6856 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6856, remove the original ARCH_BCM68360 support and migrate its configuration and dts settings. This includes: - Remove the bcm968360bg board folder. It is replaced by the generic bcmbca board folder. - Merge the 68360.dtsi setting to the new 6856.dtsi file. Update board dts with the new compatible string. - Merge broadcom_bcm968360bg.h setting to the new bcm96856.h file. - Remove bcm968360bg_ram_defconfig as a basic config version of bcm96856_defconfig is now added. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: add bcm6856 SoC support under CONFIG_ARCH_BCMBCAWilliam Zhang12-0/+243
BCM6856 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other Broadband SoC, this patch adds it under CONFIG_BCM6856 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: make reset_cpu function weakWilliam Zhang1-1/+1
BCM63158 carries the CONFIG_SYSRESET from the original configuration. It provide reset_cpu function already so need to define weak version of the dummy reset_cpu for other BCMBCA SoCs to avoid linking error. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31MAINTAINERS: Add BCM63158 maintainer to BCMBCA entryWilliam Zhang1-0/+1
Since ARCH_BCM63158 SoC support is merged into ARCH_BCMBCA, add BCM63158 maintainer Philippe to bcmbca maintainer list. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: replace ARCH_BCM63158 symbols in Kconfig with BCM63158William Zhang5-5/+5
As CONFIG_ARCH_BCM63158 is replaced with CONFIG_BCM63158, update the Kconfig to use the new config symbol. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: remove bcm63158 support under CONFIG_ARCH_BCM63158William Zhang9-195/+5
Now that BCM63158 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM63158, remove the original ARCH_BCM63158 support and migrate configuration settings. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: add bcm63158 SoC support under CONFIG_ARCH_BCMBCAWilliam Zhang12-196/+239
BCM63158 is a Broadcom B53 based DSL Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other Broadband SoC, this patch adds it under CONFIG_BCM63158 chip config and CONFIG_ARCH_BCMBCA platform config. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: add bcm4908 SoC supportWilliam Zhang12-0/+264
BCM4908 is a Broadcom B53 based WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux git repository so the dts and dtsi files are stripped down version of linux copies with mininum blocks needed by u-boot. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31arm: bcmbca: add bcm6813 SoC supportWilliam Zhang12-0/+265
BCM6813 is a Broadcom B53 based PON and WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31arm: bcmbca: add bcm4912 SoC supportWilliam Zhang12-0/+265
BCM4912 is a Broadcom B53 based WLAN AP router SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31arm: bcmbca: add bcm63146 SoC supportWilliam Zhang12-0/+247
BCM63146 is a Broadcom B53 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2022-10-31arm: bcmbca: add bcm63138 SoC supportWilliam Zhang11-0/+255
BCM63138 is an ARM A9 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory, ARM A9 global timer and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are stripped down version of linux copies with mininum blocks needed by u-boot. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console. This patch applies on top of the my previous patch [1]. [1] https://lists.denx.de/pipermail/u-boot/2022-August/490570.html Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-10-31arm: bcmbca: add bcm63148 SoC supportWilliam Zhang11-0/+208
BCM63148 is an Broadcom B15 based DSL Broadband SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and Broadcom uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
2022-10-31arm: bcmbca: add bcm6756 SoC supportWilliam Zhang11-4/+239
BCM6756 is an ARM A7 based WLAN Gateway and Access Point Broadband SoC. It is part of the BCA(Broadband Carrier Access origin) chipset family so it's added under ARCH_BCMBCA platform. This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux. The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there. Signed-off-by: William Zhang <william.zhang@broadcom.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-06 08:38:03 +0300