summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-11-08Fix syntax errorLeo Yu-Chi Liang1-1/+1
This statement has an unmatched parentheses, fix it. Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-08riscv: ae350: Use #if defined instead of CONFIG_IS_ENABLEDLeo Yu-Chi Liang1-2/+2
According to ./include/linux/kconfig.h, CONFIG_IS_ENABLED(OF_BOARD) expands to 0 when CONFIG_SPL_BUILD is defined because there is no CONFIG_SPL_OF_BOARD. Use #if defined instead. Fixes: 2e8d2f88439d ("riscv: Remove OF_PRIOR_STAGE from RISC-V boards") Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-08riscv: add #define in asm/io.h for some device driversWei Fu1-0/+4
This patch adds memcpy_fromio and memcpy_toio definitions for some device drivers which have these definitions, like cadence_qspi_apb.c Signed-off-by: Wei Fu <wefu@redhat.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-08cmd: sbi: show SBI implementation versionHeinrich Schuchardt1-8/+18
Let the sbi command show the SBI implementation version Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-11-08riscv: function to retrieve SBI implementation versionHeinrich Schuchardt2-0/+20
Provide function sbi_get_impl_version() to retrieve the SBI implementation version. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-11-05Merge branch '2021-11-05-Kconfig-syncs'Tom Rini234-295/+167
- An assortment of changes to finish migration of a number of symbols, and move YAFFS2 related options that we enable to Kconfig as well.
2021-11-05configs: Resync with savedefconfigTom Rini19-23/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05Convert CONFIG_BOARD_EARLY_INIT_F et al to KconfigTom Rini18-22/+7
This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F CONFIG_BOARD_LATE_INIT CONFIG_DISPLAY_BOARDINFO CONFIG_DISPLAY_BOARDINFO_LATE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05Convert CONFIG_SPL_DRIVERS_MISC et al to KconfigTom Rini53-95/+69
This converts the following to Kconfig: CONFIG_SPL_DRIVERS_MISC CONFIG_SPL_ENV_SUPPORT CONFIG_SPL_GPIO CONFIG_SPL_I2C CONFIG_SPL_LDSCRIPT CONFIG_SPL_LIBCOMMON_SUPPORT CONFIG_SPL_LIBGENERIC_SUPPORT CONFIG_SPL_LOAD_FIT_ADDRESS CONFIG_SPL_MMC CONFIG_SPL_NAND_SUPPORT CONFIG_SPL_NO_CPU_SUPPORT CONFIG_SPL_OS_BOOT CONFIG_SPL_POWER CONFIG_SPL_STACK_R CONFIG_SPL_STACK_R_ADDR CONFIG_SPL_WATCHDOG CONFIG_SPL_TEXT_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05Convert CONFIG_BMP_16BPP to KconfigTom Rini2-1/+1
This converts the following to Kconfig: CONFIG_BMP_16BPP Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05Convert CONFIG_OF_EMBED to KconfigTom Rini8-15/+2
This converts the following to Kconfig: CONFIG_OF_EMBED Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-11-05Convert CONFIG_MCFUART to KconfigTom Rini33-15/+18
This converts the following to Kconfig: CONFIG_MCFUART Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05Convert CONFIG_FEC_MXC to KconfigTom Rini47-18/+30
This converts the following to Kconfig: CONFIG_FEC_MXC Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05Convert CONFIG_SUPPORT_EMMC_BOOT to KconfigTom Rini26-13/+14
This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05Convert CONFIG_SYS_TEXT_BASE to KconfigTom Rini2-2/+0
This converts the following to Kconfig: CONFIG_SYS_TEXT_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05Convert CONFIG_SYS_HZ to KconfigTom Rini45-75/+0
This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05spl: Make use of CONFIG_IS_ENABLED(OS_BOOT) in SPL/TPL common code pathsTom Rini12-15/+15
When building a system that has both TPL and SPL_OS_BOOT, code which tests for CONFIG_SPL_OS_BOOT will be built and enabled in TPL, which is not correct. While there is no CONFIG_TPL_OS_BOOT symbol at this time (and likely will not ever be) we can use CONFIG_IS_ENABLED(OS_BOOT) in these common paths to ensure we only compile these parts in the SPL case. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05fs: yaffs2: Finish Kconfig migrationTom Rini2-4/+12
For the symbols which are both hard-coded as enabled and used, move to Kconfig. The rest of the CONFIG_YAFFS namespace is unselected anywhere, so we leave it as is. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-04Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini9-13/+67
- Improved sysreset/watchdog uclass integration (Samuel)
2021-11-04sunxi: Use sysreset framework for poweroff/resetSamuel Holland1-0/+3
Instead of hardcoding the watchdog for reset, and the PMIC for poweroff, use the sysreset framework to manage the available poweroff/reset backends. This allows (as examples) using the PMIC to do a cold reset, and using a GPIO to power off H3/H5 boards lacking a PMIC. Furthermore, it removes the need to hardcode watchdog MMIO addresses, since the sysreset backends can be discovered using the device tree. Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-04sunxi: Avoid duplicate reset_cpu with SYSRESET enabledSamuel Holland1-0/+2
The sysreset uclass unconditionally provides a definition of the reset_cpu() function. So does the sunxi board code. Fix the build with SYSRESET enabled by omitting the function from the board code in that case. The code still needs to be kept around for use in SPL. Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-04watchdog: Automatically register device with sysresetSamuel Holland4-0/+49
Add an option to automatically register watchdog devices with the wdt_reboot driver for use with sysreset. This allows sysreset to be a drop-in replacement for platform-specific watchdog reset code, without needing any device tree changes. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-04sysreset: watchdog: Move watchdog reference to plat dataSamuel Holland1-8/+8
Currently, the wdt_reboot driver always gets its watchdog device reference from an OF node. This prevents selecting a watchdog at runtime. Move the watchdog device reference to the plat data, so the driver can be bound with the reference pre-provided. The reference will still be acquired from the OF node if it is not already provided. Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-04sysreset: Mark driver probe functions as staticSamuel Holland4-4/+4
These driver probe functions are not (and should not be) called from outside the respective driver source files. Therefore, the functions should be marked static. Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-04sysreset: Add uclass Kconfig dependency to driversSamuel Holland1-2/+2
None of the sysreset drivers do anything beyond providing sysreset uclass ops. They should depend on the sysreset uclass. Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini1-0/+1
- usb: mtu3: flush cache for the first GPD when allocate GPD ring
2021-11-03Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini3-234/+451
- pci_mvebu: Fix access to config space and PCIe Root Port (Pali) - a37xx: pci: Program the data strobe for config read requests (Pali) - kwboot: Misc improvements and fixes (Pali)
2021-11-03usb: mtu3: flush cache for the first GPD when allocate GPD ringChunfeng Yun1-0/+1
When allocate the GPD ring, and tell its address to the controller, then the driver starts or resumes the QMU, the controller will try to access the first GPD, so need flush the first one to avoid wrong GPD status. Reported-by: Xin Lin <Xin.Lin@mediatek.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
2021-11-03arm: a37xx: pci: Program the data strobe for config read requestsPali Rohár1-0/+3
According to the Armada 3720 Functional Specification Data Strobe applies for both read and write config requests. Data strobe bits configure which bytes from the start address should be returned for read request. Set value 0xf (all 4 bits) into Data Strobe register to read all four bytes from specified 32-bit config space register. Same value for Data Strobe register is programmed by Linux pci-aardvark.c driver for config read requests. Without this patch pci-aardvark driver sets data strobe register only during config write operations. So any followup config read operations could result with just partial datai returned (if previous write operation was not 32-bit wide). This patch fixes it and ensures that config read operations always read all bytes from requested register. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Do not send magic seq when changing baudrate back to 115200Pali Rohár1-55/+60
After successful transfer of whole image only two things can happen: - BootROM starts execution of data block, which changes UART baudrate back to 115200 Bd, - board crashes and causes CPU reset In both cases UART baudrate is reset to the default speed. So there is no need to send special magic sequence to inform kwboot that baudrate is going to be reset and kwboot does not need to wait for this event and can do it immediately after BootROM acknowledges end of xmodem transfer. Move ARM code for sending magic sequence from main baudrate change section to binhdr_pre section which is executed only before changing baudrate from the default value of 115200 Bd to some new value. Remove kwboot code waiting for magic sequence after successful xmodem transfer. Rationale: sometimes when using very high UART speeds, magic sequence is damaged and kwboot fails at this last stage. Removal of this magic sequence makes booting more stable. Data transfer protocol (xmodem) is using checksums and retransmit, so it already deals with possible errors on transfer line. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Do not use stack when setting baudrate back to default valuePali Rohár1-47/+65
The ARM code we inject into the image to change baudrate back to the default value of 115200 Baud, which is run after successful UART transfer of the whole image, cannot use stack as at this stage stack pointer is not initialized yet. Stack can only be used when BootROM is executing binary header, to preserve state of registers, since BootROM expects that. Change the ARM baudrate code to not use stack at all and put binary header specific pre + post code (which stores and restores registers) into separate arrays. The baudrate change code now jumps at it's end and expects that there is either code which returns to the BootROM or jumps to the original exec address. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Replace ARM mov + movt instruction pair by mov + orrPali Rohár1-2/+2
Older Armada SoCs have custom ARMv5te compatible core which does not support movt instruction. So replace mov + movt instruction pair used for immediate move construction by mov + orr instructions which are supported also by ARMv5te. After this change kwboot ARM code should be compatible with any 32-bit ARM core compatible by ARMv2 or new. At least GNU AS does not throw any error or warning. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Increase delay after changing baudrate in ARM codePali Rohár1-9/+9
Increase loop cycles from 600000 to 2998272, which should increase delay from 1ms to about 5ms on 1200 MHz CPU. The Number 2998272 was chosen as the nearest value around 3000000 which can be encoded into one ARM mov instruction. It avoids usage of movt instruction which is not supported by ARMv5te cores. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Do not call tcdrain() after each sent packetPali Rohár1-5/+8
Kwboot puts each xmodem packet to kernel queue, then waits until all bytes of that packet are transmitted over UART and then waits for xmodem reply until it is received into kernel queue. If some reply is received during the time we are waiting until all bytes are transmitted, then kernel puts them into the queue and returns it to kwboot in next read() call. So there is no need to wait (with tcdrain() function) until all bytes from xmodem packet are transmitted over UART, since any reply received either during that time or after is returned to kwboot with the next read(). Therefore do not call tcdrain() after each xmodem packet sent. Instead directly wait for any reply after putting xmodem packet into write kernel queue. This change could speed up xmodem transfer in case tcdrain() function waits for a longer time. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Fix sending retry of last header packetPali Rohár1-5/+2
After the trasfer of last header packet, it is possible that baudrate change pattern is received, and also that NAK byte is received so that the packet should be sent again. Thus we should not clear the baudrate change state when sending retry of that packet. Move code for initializing state variables from kwboot_xm_recv_reply() to kwboot_xm_sendblock(). Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Resend first 3 xmodem retry packets immediatelyPali Rohár1-3/+10
Currently when kwboot receive some garbage reply which does not understand, it waits 1s before it tries to resend packet again. The most common error on UART is that receiver sees some bit flipped which results in invalid reply. This behavior slows down xmodem transfer over UART as basically on every error kwboot is waiting one second. To fix this, try to resend xmodem packet for first 3 attempts immediately without any delay. If broken reply is received also after the 3 attempts, continue retrying with 1s delay like it was before. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Change retry loop from decreasing to increasingPali Rohár1-4/+4
This patch does not change behavior of the code, just allows to implement new changes more easily. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Calculate real used space in kwbimage header when calling ↵Pali Rohár1-3/+14
kwboot_img_grow_hdr() Size of the header stored in kwbimage may be larger than real used size in the kwbimage header. If there is unused space in kwbimage header then use it for growing it. So update code to calculate used space of kwbimage header. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Do not modify kwbimage header before increasing its sizePali Rohár1-3/+6
This ensures that kwboot_img_grow_hdr() function still sees valid kwbimage header. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Simplify code for aligning image headerPali Rohár1-3/+2
Expression (hdrsz % KWBOOT_XM_BLKSZ) is non-zero therefore expression (KWBOOT_XM_BLKSZ - hdrsz % KWBOOT_XM_BLKSZ) is always less than value KWBOOT_XM_BLKSZ. So there is no need to add another modulo. Also rename variable `offset` to `grow` which better describes what is stored in this variable. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Show verbose message when waiting for baudrate change magicPali Rohár1-1/+1
It is hard to debug why kwboot is failing when the last message is 'Finishing transfer' and no additional output. So show verbose message when kwboot finished transfer and is waiting for baudrate change magic sequence. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Correctly set configuration of UART for BootROM messagesPali Rohár1-0/+11
For kwbimage v1, tell BootROM to send BootROM messages to UART port number 0 (used also for UART booting) with default baudrate (which should be 115200) and do not touch UART MPP configuration. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Recalculate 4-byte data checksum after injecting baudrate codePali Rohár1-0/+3
If data part of image is modified, update 4-byte data checksum. It looks like A385 BootROM does not verify this checksum for image loaded via UART, but we do not know if other BootROMs are also ignoring it. It is always better to provide correct checksum. Signed-off-by: Pali Rohár <pali@kernel.org> [ refactored ] Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Inject baudrate change back code after data partPali Rohár1-41/+31
Some vendor U-Boot kwbimage binaries (e.g. those for A375) have load address set to zero. Therefore it is not possible to inject code which changes baudrate back to 115200 Bd before the data part. So instead inject it after the data part and change kwbimage execution address to that offset. Also store original execution address into baudrate change code, so after it changes baudrate back to 115200 Bd, it can jump to orignal address. Signed-off-by: Pali Rohár <pali@kernel.org> [ refactored ] Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Validate 4-byte image data checksumPali Rohár1-0/+34
Data part of the image contains 4-byte checksum. Validate it when processing the image. Signed-off-by: Pali Rohár <pali@kernel.org> [ refactored ] Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Reserve enough space for patching kwbimage in memoryPali Rohár1-1/+3
SPI image header and data parts do not have to be aligned to 128 byte xmodem block size. So reserve additional memory for aligning header part and additional memory for aligning data part. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Fix initialization of tty devicePali Rohár1-0/+1
Explicitly disable 2 stop bits by clearing CSTOPB flag, disable modem control flow by clearing CRTSCTS flag and do not send hangup after closing device by clearing HUPCL flag. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03tools: kwboot: Initialize rfds to zeroPali Rohár1-0/+1
Explicitly zero out the rfds fd_set with FD_ZERO() before using it. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03pci: pci_mvebu: Fix comment about driver class namePali Rohár1-1/+1
This is a pci driver, not an eth driver. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-03pci: pci_mvebu: Setup PCI controller to Root Complex modePali Rohár1-0/+6
Root Complex should be the default mode, let's set it explicitly. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-14 11:36:17 +0300