summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-04-21buildman: Use yellow consistently for warning linesSimon Glass2-4/+4
At present warnings are shown in yellow in the summary (-s) but magenta in the detail listing (-e). Use yellow in both. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Test the output with --list-error-boardsSimon Glass1-14/+32
Add a test to cover this flag, which adds the name of each board to each error/warning line. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Add a test helper for creating a line prefixSimon Glass1-20/+31
The split/join code is repeated in a lot of places. Add a function to handle this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Split out testOutput() into separate functionsSimon Glass1-6/+28
We want to add a few more tests similar to testOutput(). Split its logic into a function which runs buildman to get the output and another which checks the output. This will make it easier to reuse the code. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Create temp directory in test setupSimon Glass1-16/+10
Rather than having a few tests handle this themselves, create the temporary directory in the setUp() method and remove it in tearDown(). This will make it easier to add more tests. Only testOutput and testGit() actually need it, but it doesn't add to the test time noticeably to do this for all tests in this file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Use an iterator to check test outputSimon Glass1-42/+52
Rather than using the absolute array index, use an interator to work through the expected output lines. This is easier to follow. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Add test coverage for error/warning colourSimon Glass1-0/+7
Buildman should output the right colours for each error/warning line. Some of these checks are missing. Add them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21buildman: Refactor error-line output int a functionSimon Glass1-13/+19
Reduce the amount of repeated code by creating an _OutputErrLines() function to hold this code. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-21Merge tag 'for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2cTom Rini7-3/+1066
i2c changes for 2020.07 - add new i2c driver for Broadcom iproc-based socs - fix cmd: eeprom: Staticize eeprom_i2c_bus - i2c: muxes: pca954x: add PCA9546 variant
2020-04-21Merge tag 'for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-ubiTom Rini2-0/+47
new ubi command for renaming an UBI volume
2020-04-21mmc: tmio: sdhi: Add DMA transfer address alignment check at writingHiroyuki Yokoyama1-3/+5
In R-Car Gen 3, there is a DMA controller restriction of SDHI. When the transfer exceeding the 4 kByte boundary is performed while the DRAM address is not 128 byte aligned, the bus is occupied. This patch avoids this. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-04-21Merge branch '2020-04-17-master-imports'Tom Rini36-139/+832
- Further cleanups for 'make refcheckdocs' - Another BTRFS fix. - Support for automatic decompression of images with booti as well as unlz4 command for manual decompression.
2020-04-20Merge tag 'u-boot-amlogic-20200420' of ↵Tom Rini20-26/+316
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - enable DM_RNG on meson boards - fix SMBIOS info on Odroid-C2 - Fix video output on GXBB/GXL/GXM boards - add USB gadget support for GXL/GXM boards
2020-04-20fs: btrfs: support sparse extentsMarek Behún1-0/+6
When logical address of a regular extent is 0, the extent is sparse and consists of all zeros. Without this when sparse extents are used in a file reading fails with Cannot map logical address 0 to physical Signed-off-by: Marek Behún <marek.behun@nic.cz>
2020-04-20Merge tag 'ti-v2020.07-rc1' of ↵Tom Rini12-34/+121
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Fix boot on am335x guardian board - Increase OPSI speed on AM65x and J721E devices - Use JTAD register for identifying K3 devices. - Update TI entry in MAINTAINERS file.
2020-04-20Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-imxTom Rini92-492/+3153
2020-04-20configs: libretech-s912-pc: Enable USB gadget with Mass Storage functionNeil Armstrong1-0/+7
Enable configs to support USB gadget and Mass Storage Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20configs: libretech-s905d-pc: Enable USB gadget with Mass Storage functionNeil Armstrong1-0/+7
Enable configs to support USB gadget and Mass Storage Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20configs: khadas-vim: Enable USB gadget with Mass Storage functionNeil Armstrong1-0/+7
Enable configs to support USB gadget and Mass Storage Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20configs: khadas-vim2: Enable USB gadget with Mass Storage functionNeil Armstrong1-0/+7
Enable configs to support USB gadget and Mass Storage Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20configs: libretech-ac: Enable USB gadget with Mass Storage functionNeil Armstrong1-0/+7
Enable configs to support USB gadget and Mass Storage Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20configs: libretech-cc: Enable USB gadget with Mass Storage functionNeil Armstrong1-0/+7
Enable configs to support USB gadget and Mass Storage Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20arm: dts: meson-gxl: Add USB Gadget nodes for U-BootNeil Armstrong4-3/+30
Add the USB DWC2 node to u-boot specific dtsi files since Gadget support is not (yet) available in upstream Linux yet. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20arm: meson-gx: add board_usb_init()/cleanup() for USB gadgetNeil Armstrong1-0/+118
Add arch code to initialize USB Gadget mode using the DWC2 controller, and using the previously added set_mode() phy functions. [narmstrong: fixup board_usb_cleanup call to phy_meson_gxl_usb2_set_mode] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20phy: meson-gxl-usb: add set_mode call to force switch to peripheral modeNeil Armstrong3-18/+72
Add set_mode function in the Amlogic GXL PHYs that will be called by the arch code to switch PHYs from/to gadget mode. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20generic-phy: add generic_phy_get_by_node()Neil Armstrong2-5/+40
Add generic_phy_get_by_node() to get a PHY phandle from a node instead of a udevice. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com> [narmstrong: fixed by including ofnode.h in generic-phy.h]
2020-04-20t208xqds: add support for backplane krFlorinel Iordache1-9/+20
Add support for backplane kr on t208xqds: remove board specific fixups on t208xqds for ethernet interfaces specified in device tree as supported backplane modes. Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20lx2160aqds: add support for backplane krFlorinel Iordache1-1/+8
Add support for backplane kr on lx2160aqds: remove board specific fixups on lx2160aqds for ethernet interfaces specified in device tree as supported backplane modes. Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20ls1046aqds: add support for backplane krFlorinel Iordache1-12/+7
Add support for backplane kr on ls1046aqds: remove board specific fixups on ls1046aqds for ethernet interfaces specified in device tree as supported backplane modes. Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20phy: add support for backplane kr modeFlorinel Iordache3-0/+41
Add generic support for backplane kr modes currently available: 10gbase-kr, 40gbase-kr4. Remove platform generic fixups (armv8/layerscape and powerpc) for ethernet interfaces specified in device tree as supported backplane modes. Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20armv8: ls1028a: define esdhc_status_fixupYinbo Zhu2-0/+45
This patch is to define esdhc_status_fixup function for ls1028a to disable SDHC1/SDHC2 status in device tree node if not selected. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20board: fsl: lx2160a: unused variable gic_lpi_baseHeinrich Schuchardt1-1/+1
If the board is configured without CONFIG_GIC_V3_ITS, an error occurs: board/freescale/lx2160a/lx2160a.c: In function ‘ft_board_setup’: board/freescale/lx2160a/lx2160a.c:673:6: error: unused variable ‘gic_lpi_base’ [-Werror=unused-variable] 673 | u64 gic_lpi_base; | ^~~~~~~~~~~~ Let's define the variable as __maybe_unused. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20drivers: i2c: add brcm iproc I2C driver supportRayagonda Kokatanur4-0/+1057
Add I2C driver support for Broadcom iproc-based socs. Signed-off-by: Arjun Jyothi <arjun.jyothi@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-04-20cmd: eeprom: Staticize eeprom_i2c_busMarek Vasut1-1/+1
The eeprom_i2c_bus is not used outside of this file, make it static. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-04-20i2c: muxes: pca954x: add PCA9546 variantChris Packham2-2/+8
This adds the PCA9546 4-channel i2c bus switch. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-04-20cmd: ubi: add a command to rename volumePhilippe Reynes2-0/+47
This commit adds the command ubi rename to rename an ubi volume. The format of the command is: ubi rename <oldname> <newname>. To enable this command, the option CMD_UBI_RENAME must be selected. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-19arm: mach-k3: Use JTAD_ID register for device identificationLokesh Vutla3-18/+8
JTAG ID register is defined by IEEE 1149.1 for device identification. Use this JTAG ID register for identifying AM65x[0] and J721E[1] devices instead of using SoC specific registers. [0] http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf [1] http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-04-18Add support for i.MXRT1020-EVK boardGiulio Benetti12-1/+544
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18dt-bindings: pinctrl: add i.MXRT1020 pins definitionGiulio Benetti1-0/+763
Add i.MXRT1020 pins definition. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-04-18ARM: dts: imxrt1020: add dtsi fileGiulio Benetti1-0/+133
Add dtsi file for i.MXRT1020. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18Add i.MXRT1020 supportGiulio Benetti1-0/+4
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18clk: imx: add i.IMXRT1020 clk driverGiulio Benetti4-0/+296
Add i.MXRT1020 clk driver support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18imx: pmic: Set proper pmic name for iMX53 HSC|DDC boardsLukasz Majewski1-1/+1
After the commit 4213609cc7fb ("drivers: core: use strcmp when find device by name") the exact DTS node name for PMIC device must be provided. This patch fixes this issue by providing full DTS node name ('mc34708@8'). Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jaehoon Chug <jh80.chung@samsung.com>
2020-04-18config: imx: Enable CONFIG_PHY_FIXED on HSC and DDC i.MX53 boardsLukasz Majewski1-0/+1
The CONFIG_PHY_FIXED is necessary to allow DSA switch work in U-Boot after the commit 3bf135b6c367 ("drivers: net: phy: Ignore PHY ID 0 during PHY probing"). This particular device - LAN9303 - returns phy_id == 0. With CONFIG_PHY_FIXED enabled HSC and DDC boards work again with the same U-Boot binary. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-04-18dts: imx: Add fixed-link property to HSC and DDC (imx53) devicesLukasz Majewski1-0/+7
Those two boards are supposed to be run with a single u-boot binary. There are notable differences though - HSC uses DSA switch (which phy_id == 0x0) and DCC (DP83848C). After the commit 3bf135b6c367 ("drivers: net: phy: Ignore PHY ID 0 during PHY probing") the PHY devices with phy_id == 0 are not created in U-Boot anymore. This caused regression on HSC. To fix this problem - the fec's 'fixed-link' node has been introduced and the phy_id is not assessed anymore. This approach works on both boards. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-04-18ARM: imx6: DHCOM i.MX6 PDK: Fix usb-otg VBUS regulatorHarald Seiler2-0/+11
During the conversion of this board to DM_REGULATOR, usb-mass-storage was broken and started failing with the following error: => ums 0 mmc 2 UMS: LUN 0, dev 2, hwpart 0, sector 0x0, count 0xe90000 Error enabling VBUS supply g_dnl_register: failed!, error: -38 g_dnl_register failed Fix this by adding the relevant GPIO to the regulator node. Fixes: 4ca99fe81aea ("ARM: imx: dh-imx6: Enable DM regulator") Signed-off-by: Harald Seiler <hws@denx.de>
2020-04-18ARM: imx6: DHCOM i.MX6 PDK: Convert to DM_ETHHarald Seiler5-49/+33
Use DM_ETH instead of legacy networking. Add VIO as a fixed regulator to the relevant device-trees and augment the FEC node with properties for the reset GPIO. It should be noted that the relevant properties for the reset GPIO already exist in the PHY node (reset-gpios, reset-delay-us, reset-post-delay-us) but U-Boot currently ignores those and only supports the bus-level reset properties in the FEC node (phy-reset-gpios, phy-reset-duration, phy-reset-post-delay). Signed-off-by: Harald Seiler <hws@denx.de>
2020-04-18wandboard: Print the board version in board_late_init()Fabio Estevam1-14/+9
Since CONFIG_DISPLAY_BOARDINFO_LATE is no longer used, the checkboard() function is no longer called. As it is useful to print the board revision, print it inside board_late_init() instead. Also, to avoid GPIO errors related to using a GPIO without requesting it, move the gpio_request(REV_DETECTION, "REV_DETECT") call prior to its usage. Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Heiko Schocher <hs@denx.de>
2020-04-18wandboard: Remove CONFIG_DISPLAY_BOARDINFO_LATEFabio Estevam1-1/+0
Since we are using revD1 device tree for all board revisions, the following can be seen on a revB1 board: Model: Wandboard i.MX6 Quad Board revD1 Board: Wandboard rev B1 To avoid such confusing messages, disable CONFIG_DISPLAY_BOARDINFO_LATE. Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Heiko Schocher <hs@denx.de>
2020-04-18wandboard: Do not print error when PMIC is not presentFabio Estevam1-1/+1
On wandboard variants prior to revD1, there is no PMIC populated, so do not print an error when the reading of the device ID register fails. Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Heiko Schocher <hs@denx.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-05 21:38:54 +0300