summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-11-29net: dwc_eth_qos: Add StarFive VisionFive 2 board supportHal Feng1-0/+13
Make the code be compatible with the StarFive VisionFive 2 board. The code is ported from tag JH7110_VF2_515_v3.9.3 of VF2 repo. Signed-off-by: Samin Guo <samin.guo@linux.starfivetech.com> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
2023-11-29mmc: dw_mmc: Add StarFive VisionFive 2 board supportHal Feng1-0/+4
Make the code be compatible with the StarFive VisionFive 2 board. The code is ported from tag JH7110_VF2_515_v3.9.3 of VF2 repo. Signed-off-by: William Qiu <william.qiu@starfivetech.com> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
2023-11-29cmd: eeprom: Add StarFive VisionFive 2 board supportJianlong Huang3-28/+44
Rename CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR based on current usage. Convert CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SYS_EEPROM_SIZE, CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS to Kconfig. Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
2023-11-29cmd/eeprom: fix data type issue for parse_numeric_paramJianlong.Huang1-2/+2
This patch fixs parse_numeric_param issue on some platfrom which has different sizes of int and long, like riscv64. On riscv64, int is 4 bytes, but long is 8 bytes. on this situation: ulong addr = parse_numeric_param(argv[index]); if argv[index] is "0x80000000", this "ulong addr" will be 0xffffffff80000000. Signed-off-by: Jianlong.Huang <jianlong.huang@starfivetech.com> Co-developed-by: Wei Fu <wefu@redhat.com> Signed-off-by: Wei Fu <wefu@redhat.com>
2023-11-29i2c: designware: support SYS_I2C_DW in SPLYanhong Wang2-1/+8
Add SYS_I2C_DW driver to support in SPL. Signed-off-by: Yanhong Wang <yanhong.wang@linux.starfivetech.com>
2023-11-29efi_loader: Enable RISCV_EFI_BOOT_PROTOCOL supportSunil V L7-0/+130
This adds support for new RISCV_EFI_BOOT_PROTOCOL to communicate the boot hart ID to bootloader/kernel on RISC-V UEFI platforms. The specification of the protocol is hosted at: https://github.com/riscv-non-isa/riscv-uefi Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-11-29configs: starfive: Add starfive_visionfive2_defconfigHal Feng2-75/+168
Add a defconfig file for StarFive VisionFive 2 board. The code is ported from tag JH7110_VF2_515_v3.9.3 of VF2 repo. Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
2023-11-29riscv: dts: Add StarFive VisionFive 2 board device treeHal Feng4-113/+493
Add device tree for StarFive VisionFive 2 board. The code is ported from tag JH7110_VF2_515_v3.9.3 of VF2 repo. Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
2023-11-29riscv: dts: jh7110: Add a new clock input to gmacHal Feng1-4/+8
To be compatible with the VisionFive 2 board. The code is ported from tag JH7110_VF2_515_v3.9.3 of VF2 repo. Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
2023-11-29board: starfive: Add TARGET_STARFIVE_VISIONFIVE2 to KconfigHal Feng1-3/+3
Add board support for StarFive VisionFive 2. The code is ported from tag JH7110_VF2_515_v3.9.3 of VF2 repo. Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
2023-11-29riscv: cpu: jh7110: Add EEPROM supportHal Feng1-0/+14
Add a header to easily use the EEPROM interface. The code is ported from tag JH7110_VF2_515_v3.9.3 of VF2 repo. Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
2023-11-29board: starfive: Add StarFive VisionFive 2 board supportHal Feng11-455/+1954
Add board support for StarFive VisionFive 2. The code is ported from tag JH7110_VF2_515_v3.9.3 of VF2 repo. Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
2023-10-18Merge branch 'CR_7842_fix_lenovo_udisk_crash_minda' into 'jh7110-master'andy.hu2-6/+20
CR_7842 usb: fix TRB_TRANSFER return null pointer issue See merge request sdk/u-boot!73
2023-10-18usb: fix TRB_TRANSFER return null pointer issueMinda Chen2-6/+20
xhci_wait_for_event() wait TRB_TRANSFER may return null pointer, shoud checkit avoid crash. Read usb device info maybe failed, should check it and do not register usb device. uboot should rescan usb device and register. Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
2023-10-11Merge branch 'usb_fix_duplicate_device_minda' into 'jh7110-master'andy.hu1-0/+3
CR7345 usb: hub: Do NOT add device if portchanged over current bit is set See merge request sdk/u-boot!72
2023-10-10usb: hub: Do NOT add device if portchanged over current bit is setMinda Chen1-0/+3
USB hub should not add the usb devices if over current bit is set in portchange. For later usb_scan_port will still return with error and rescan and add device again. it will generate dulplicated device and cause crash issue. Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
2023-09-13Merge branch 'CR_7124_PCIe_Kevin.xie' into 'jh7110-master'andy.hu2-6/+47
CR 7124 PCIe dts & driver: Modified reset & link wait timing for better compatbility. See merge request sdk/u-boot!71
2023-09-13Merge branch 'CR_7420_vf2_fastboot_Xingyu.Wu' into 'jh7110-master'andy.hu1-2/+2
CR_7420_vf2_fastboot_Xingyu.Wu See merge request sdk/u-boot!70
2023-09-13Merge branch 'CR_5472_uboot_mmc0_log_keith.zhao' into 'jh7110-master'andy.hu1-3/+0
CR 5472 vout: logo: emmc log show many times See merge request sdk/u-boot!69
2023-09-11drivers: pci: Update reset & link wait timing as spec required.Kevin.xie1-4/+45
1. Modified reset assert duration to 100ms. 2. Wait 10-100 ms for link training. 3. If link is up, delay 100ms before doing any configuration space access. Reference spec: PCIe Base Spec r6.0 & CEM 2.0. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2023-09-11riscv: dts: Add link state register to PCIe syscon nodes.Kevin.xie1-2/+2
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2023-09-11cmd: fastboot: Fix failure to enter fastbootXingyu Wu1-2/+2
Only USB host and device are same IP and should be changed mode with initialization before fastboot in Devkits. Add the target of Devkits to math the board. Fixes: 67df54127e38 ("cmd: fastboot: Add presetting on StarFive SoC before fastboot") Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
2023-09-08vout: logo: emmc log show many timesKeith Zhao1-3/+0
the vout clocks on enable status, when no connecters (hdmi or mipi) this will cause emmc init many times need to closed the vout clocks Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
2023-09-07Merge branch 'CR_4615_add_fastboot_Xingyu.Wu' into 'jh7110-master'andy.hu10-1/+167
CR_4615_add_fastboot_Xingyu.Wu See merge request sdk/u-boot!68
2023-09-07common: autoboot: Add auto-fastboot on StarFive SoCXingyu Wu4-1/+75
Add auto-fastboot function before autoboot on StarFive SoC and add a config to enable or disable this. In the auto-fastboot, it check a environment flag of 'fb_sf_completed' first. The flag is NULL and then the fastboot will work. The flag will be set from USB tool to indicate done after flashing the image. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
2023-09-07cmd: fastboot: Add presetting on StarFive SoC before fastbootXingyu Wu1-0/+8
Add the presetting about usb as device in fastboot function. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
2023-09-07drivers: fastboot: Fix the error of writing sparse file with fastbootXingyu Wu3-0/+18
Add config for max block size to write in MMC with sparse file. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
2023-09-07drivers: fastboot: Add logical-block-size in getvar commandXingyu Wu2-0/+19
Add a new parameter to get "logical-block-size" in getvar command. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
2023-09-07driver: fastboot: Add new flag to load image file without partitionXingyu Wu1-0/+47
Add new flag to load image file to preset address without partition. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
2023-09-06Merge branch 'CR_7250_add_usb_device_in_u_boot_minda' into 'jh7110-master'andy.hu3-2/+62
CR_7250 usb: cdns: Add USB device support See merge request sdk/u-boot!67
2023-09-05dts: usb: Add starfive,usb2-only to zeroMinda Chen1-0/+1
Add starfive,usb2-only to zero in evb board. Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
2023-08-31usb: cdns: Add USB device supportMinda Chen2-2/+61
Add USB device support. Add dr_num_mode for changing the dr mode number, For changing the strings cause issues. For devkits, If using device, need to changed starfive,usb2-only to 1 and dr_num_mode to 2. Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
2023-08-30Merge branch 'CR_7199_add_usb_host_minda' into 'jh7110-master'andy.hu3-13/+246
CR_7199 usb: cdns3: starfive: Add usb driver to support for JH7110 See merge request sdk/u-boot!66
2023-08-30Merge branch 'CR_7136_fix_usb_device_xfer_timeout_minda' into 'jh7110-master'andy.hu1-4/+6
CR_7136 usb: cdns3: Set the SS EP config bit by usb SS speed See merge request sdk/u-boot!65
2023-08-25dts: usb: Add USB 3.0 clock dts.Minda Chen1-0/+15
Add evb USB 3.0 clock dts. Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
2023-08-25dts: starfive: devkits: Update usb device tree nodeYanhong Wang1-4/+8
Updated USB Device Tree Node to support USB Device functionality and is consistent with Kernel. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
2023-08-25usb: cdns3: starfive: Add usb driver to support for JH7110Yanhong Wang1-9/+223
Add usb driver to support for jh7110. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
2023-08-23usb: cdns3: Set the SS EP config bit by usb SS speedMinda Chen1-4/+6
Set SS EP config bit by USB SS speed. Avoid transfer timeout. Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
2023-08-16Merge branch 'CR_6370_nvme_sd_boot_samin.guo' into 'jh7110-master'andy.hu3-18/+131
CR6370： riscv: starfive: evb: Optimize boot logic（sd/nvme） See merge request sdk/u-boot!64
2023-08-16riscv: starfive: jh7110-evb: Optimize boot commandsSamin Guo1-1/+2
- Optimize boot commands for jh7110-evb - Add CONFIG_DEFAULT_FDT_FILE for debian boot Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-08-16riscv: starfive: evb: add get_boot_modeSamin Guo1-0/+8
add get_boot_mode function to support Multi-device boot Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-08-16riscv: starfive: evb: Add EVB_SDK_BOOTENVSamin Guo1-0/+10
Add BOOTENV for jh7110 evb Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-08-16riscv: starfive: jh7110: Add JH7110_XX_BOOTENSamin Guo1-0/+111
Add JH7110_DISTRO_BOOTEN/JH7110_SDK_BOOTEN for debian/sdk boot on JH7110 SOC. Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-08-16riscv: starfive: evb: remove unused bootenvSamin Guo1-17/+0
will be replaced by the new bootenv Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2023-07-28Merge branch 'CR_6806_MMC_evb_william.qiu' into 'jh7110-master'andy.hu2-0/+13
CR_6806: spl: starfive: modify driver strength and slew rate See merge request sdk/u-boot!63
2023-07-28riscv: dts: starfive: limit cclk_in frequencyWilliam Qiu1-0/+2
The frequency of cclk_in is limited to 50M, so that it does not do internal part frequency and goes by-pass mode. And delete syscon node. Signed-off-by: William Qiu <william.qiu@starfivetech.com>
2023-07-28spl: starfive: modify driver strength and slew rateWilliam Qiu1-0/+11
Set eMMC/sd clk's DR to 2 and set its SR to 1. Signed-off-by: William Qiu <william.qiu@starfivetech.com>
2023-07-26Merge branch 'CR_6570_SDBOOT_u-boot_william.qiu' into 'jh7110-master'andy.hu4-2/+113
CR_6570: mmc: starfive: add HS200 support See merge request sdk/u-boot!62
2023-07-26defconfig: starfive: enable HS200 supportWilliam Qiu1-0/+2
enable HS200 support. Signed-off-by: William Qiu <william.qiu@starfivetech.com>
2023-07-26gpio: starfive: Add SET_DS/SET_PULL/SET_SLEW supportSamin Guo1-1/+23
SET_DS/SET_PULL/SET_SLEW can configure the properties of the GPIO Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-29 12:51:34 +0300