summaryrefslogtreecommitdiff
path: root/README
AgeCommit message (Collapse)AuthorFilesLines
2022-12-06global: Move remaining CONFIG_SYS_* to CFG_SYS_*Tom Rini1-33/+33
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-06Convert CONFIG_SYS_SRIO et al to KconfigTom Rini1-12/+0
This converts the following to Kconfig: CONFIG_SRIO1 CONFIG_SRIO2 CONFIG_SRIO_PCIE_BOOT_MASTER CONFIG_SYS_SRIO Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-06global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*Tom Rini1-1/+1
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-06rtc: Remove unused driversTom Rini1-1/+0
These RTC drivers are currently unused and reference other unused CONFIG variables, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-06global: Move remaining CONFIG_SYS_NUM_* to CFG_SYS_NUM_*Tom Rini1-2/+2
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NUM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-06Convert CONFIG_SYS_NS16550_MEM32 et al to KconfigTom Rini1-7/+0
This converts the following to Kconfig: CONFIG_SPL_NS16550_MIN_FUNCTIONS CONFIG_SYS_NS16550_MEM32 CONFIG_SYS_NS16550_PORT_MAPPED CONFIG_SYS_NS16550_REG_SIZE CONFIG_SYS_NS16550_SERIAL To do this we also introduce CONFIG_SPL_SYS_NS16550_SERIAL so that platforms can enable the legacy driver here for SPL. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-06powerpc: Rename CONFIG_NS16550_MIN_FUNCTIONSTom Rini1-1/+1
This symbol is specific to the PowerPC SPL implementation, so rename this to reflect that it's in SPL and used / tested there, so that we can then safely migrate it to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-06global: Move remaining CONFIG_SYS_NAND_* to CFG_SYS_NAND_*Tom Rini1-5/+5
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NAND namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-06Convert CONFIG_SYS_NAND_NO_SUBPAGE_WRITE to KconfigTom Rini1-5/+0
This converts the following to Kconfig: CONFIG_SYS_NAND_NO_SUBPAGE_WRITE Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-06Convert CONFIG_SYS_NAND_HW_ECC_OOBFIRST to KconfigTom Rini1-4/+0
This converts the following to Kconfig: CONFIG_SYS_NAND_HW_ECC_OOBFIRST Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespaceTom Rini1-4/+4
Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_NONCACHED_MEMORY to KconfigTom Rini1-19/+0
This converts the following to Kconfig: CONFIG_SYS_NONCACHED_MEMORY To do this we introduce CONFIG_SYS_HAS_NONCACHED_MEMORY as a bool to gate if we are going to have noncached_... functions available and then continue to use CONFIG_SYS_NONCACHED_MEMORY to store the size of said cache. We make this new option depend on both the architectures which implement support and the drivers which make use of it. Cc: Tom Warren <twarren@nvidia.com> Cc: Mingming lee <mingming.lee@mediatek.com> Cc: "Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org> Cc: Alban Bedel <alban.bedel@avionic-design.de> Cc: Stephen Warren <swarren@nvidia.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_MONITOR_LEN to KconfigTom Rini1-6/+0
This converts the following to Kconfig: CONFIG_SYS_MONITOR_LEN To do this, we set a default of 0 for everyone because there are a number of cases where we define CONFIG_SYS_MONITOR_LEN but the only impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE, so we must continue to allow all boards to set this value. Update the SPL code to use 200 KB as the default raw U-Boot size directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_LOADS_BAUD_CHANGE et al to KconfigTom Rini1-12/+0
This converts the following to Kconfig: CONFIG_SYS_LOADS_BAUD_CHANGE CONFIG_LOADS_ECHO As part of this, we move CMD_SAVES to be after CMD_LOADS as they are logically related (load or save an s-record format file) and this makes grouping of CONFIG_SYS_LOADS_BAUD_CHANGE easier. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Remove unused symbols CONFIG_SYS_JFFS2_FIRST_BANK et alTom Rini1-8/+0
This removes the following symbols: CONFIG_RTC_MCFRRTC CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_JFFS2_FIRST_SECTOR CONFIG_SYS_JFFS2_NUM_BANKS CONFIG_SYS_LBC_CACHE_BASE CONFIG_SYS_LIME_SIZE CONFIG_SYS_MAMR CONFIG_SYS_MCFRRTC_BASE CONFIG_SYS_MONITOR_SEC Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_I2C_INIT_BOARD to KconfigTom Rini1-11/+0
This converts the following to Kconfig: CONFIG_SYS_I2C_INIT_BOARD Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-30video: Drop remaining references to CONFIG_LCDSimon Glass1-45/+0
These rely on the old LCD implementation which is to be removed. Drop it all. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30video: Drop CONFIG_LCD_ALIGNMENTSimon Glass1-8/+0
This option is not needed now that the LCD implementation is being removed. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30video: lcd: Drop console rotationSimon Glass1-21/+0
This option is not used in U-Boot anymore. Drop it option and the associated implementation. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-02Convert CONFIG_SYS_L2_PL310 to KconfigPhilip Oberfichtner1-2/+0
This converts CONFIG_SYS_L2_PL310 to Kconfig. For omap2 and mvebu the 'select SYS_L2_PL310' locations were determined using ./tools/moveconfig -i CONFIG_SYS_L2_PL310. For mx6 I manually chose ARCH_MX6 as 'select' location. The correctness has been verified using $ ./tools/moveconfig.py -f ARCH_MX6 ~SYS_L2_PL310 ~SYS_L2CACHE_OFF 0 matches That means whenever an ARCH_MX6 board had SYS_L2_PL310 disabled, this was correctly reflected in SYS_L2CACHE_OFF. Thus it's safe to insert the 'select' statement under ARCH_MX6. Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-08-12net: Remove smc91111 ethernet driverTom Rini1-14/+0
This driver has not been converted to DM_ETH. The migration deadline passed 2 years ago. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: David Feng <fenghua@phytium.com.cn> Cc: Liviu Dudau <liviu.dudau@foss.arm.com> Cc: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Ramon Fried <rfried.dev@gmail.com>
2022-08-12Convert CONFIG_SYS_FSL_QMAN_V3 et al to KconfigTom Rini1-6/+0
This converts the following to Kconfig: CONFIG_FSL_NGPIXIS CONFIG_SYS_FSL_QMAN_V3 CONFIG_SYS_FSL_RAID_ENGINE CONFIG_SYS_FSL_RMU CONFIG_SYS_FSL_SINGLE_SOURCE_CLK CONFIG_SYS_FSL_SRIO_LIODN CONFIG_SYS_FSL_TBCLK_DIV CONFIG_SYS_FSL_USB1_PHY_ENABLE CONFIG_SYS_FSL_USB2_PHY_ENABLE CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12Convert CONFIG_SYS_FSL_PCIE_COMPAT to KconfigTom Rini1-5/+0
This converts the following to Kconfig: CONFIG_SYS_FSL_PCIE_COMPAT To do this, introduce a choice and option for each of the strings used and set CONFIG_SYS_FSL_PCIE_COMPAT based on that. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12Remove CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR et alTom Rini1-15/+0
This removes the following symbols: CONFIG_SYS_FSL_DSPI_BE CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET CONFIG_SYS_FSL_DSP_DDR_ADDR CONFIG_SYS_FSL_DSP_M2_RAM_ADDR CONFIG_SYS_FSL_DSP_M3_RAM_ADDR CONFIG_SYS_FSL_ERRATUM_A008751 CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT CONFIG_SYS_FSL_ESDHC_NUM CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET CONFIG_SYS_FSL_ISBC_VER CONFIG_SYS_FSL_QSPI_LE CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR CONFIG_SYS_FSL_SCFG_IODSECR1_OFFSET CONFIG_SYS_FSL_SCFG_PIXCLKCR_OFFSET CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR CONFIG_SYS_FSL_SRDS_NUM_PLLS CONFIG_SYS_FSL_WDOG_BE CONFIG_SYS_GP1DIR CONFIG_SYS_GP1ODR CONFIG_SYS_GP2DIR CONFIG_SYS_GP2ODR CONFIG_SYS_HALT_BEFOR_RAM_JUMP CONFIG_SYS_HMI_BASE FSL_QSPI_FLASH_NUM FSL_QSPI_FLASH_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12arc: Move SYS_LITTLE_ENDIAN / SYS_BIG_ENDIAN selection to KconfigTom Rini1-4/+0
We can determine which of these we need given CPU_BIG_ENDIAN being enabled or not, so move that logic to Kconfig from config.mk. Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-12Convert CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS et al to KconfigTom Rini1-51/+0
This converts the following to Kconfig: CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS And we remove the entries from the README for a number of already converted items. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_FSL_DDR_INTLV_256B to KconfigTom Rini1-5/+0
This converts the following to Kconfig: CONFIG_SYS_FSL_DDR_INTLV_256B Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_FSL_CCSR_GUR_BE et al to KconfigTom Rini1-6/+0
This converts the following to Kconfig: CONFIG_SYS_FSL_CCSR_GUR_BE CONFIG_SYS_FSL_CCSR_SCFG_BE CONFIG_SYS_FSL_ESDHC_BE CONFIG_SYS_FSL_IFC_BE CONFIG_SYS_FSL_PEX_LUT_BE CONFIG_SYS_FSL_CCSR_GUR_LE CONFIG_SYS_FSL_CCSR_SCFG_LE CONFIG_SYS_FSL_ESDHC_LE CONFIG_SYS_FSL_IFC_LE CONFIG_SYS_FSL_PEX_LUT_LE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_FLASH_QUIET_TEST to KconfigTom Rini1-6/+0
This converts the following to Kconfig: CONFIG_SYS_FLASH_QUIET_TEST Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_MAX_FLASH_SECT to KconfigTom Rini1-3/+0
This converts the following to Kconfig: CONFIG_SYS_MAX_FLASH_SECT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_FLASH_ERASE_TOUT et al to KconfigTom Rini1-12/+0
This converts the following to Kconfig: CONFIG_SYS_FLASH_ERASE_TOUT CONFIG_SYS_FLASH_LOCK_TOUT CONFIG_SYS_FLASH_UNLOCK_TOUT CONFIG_SYS_FLASH_WRITE_TOUT In practice, for two m68k platforms we move to hard-coding with a comment the timeout values, rather than try and make convoluted Kconfig logic. We add options for the write and erase options to the pic32 flash driver, as this driver does make use of them. Everywhere else these are unreferenced values. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04net: Remove CONFIG_SYS_DIRECT_FLASH_TFTPTom Rini1-13/+0
No platforms enable the functionality to tftp directly to NOR flash, and this is discouraged by the documentation. Remove this code. Further, this highlights an oddity of the code. Un-indent the start of this function. Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-29doc: develop: Describe system configurationTom Rini1-21/+0
Start by describing in general the best practices for how to implement configuration of some aspect of U-Boot. This generally means finding the right choices for when something should be static or dynamically configured and enabled. Then further document when to use CONFIG or CFG namespaces for static configuration. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-07-26fpga: Convert SYS_FPGA_PROG_FEEDBACK to KconfigAlexander Dahl1-4/+0
This converts the following to Kconfig: SYS_FPGA_PROG_FEEDBACK Signed-off-by: Alexander Dahl <ada@thorsis.com> Link: https://lore.kernel.org/r/20220721133122.32428-3-ada@thorsis.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-26fpga: Convert SYS_FPGA_CHECK_CTRLC to KconfigAlexander Dahl1-3/+0
After commit 8cca60a2cbf2 ("Kconfig: Remove some symbols from the whitelist") downstream builds failed for boards setting this in include/configs/… Signed-off-by: Alexander Dahl <ada@thorsis.com> Link: https://lore.kernel.org/r/20220721133122.32428-2-ada@thorsis.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-07Convert CONFIG_SYS_BOOTM_LEN to KconfigTom Rini1-6/+0
This converts the following to Kconfig: CONFIG_SYS_BOOTM_LEN As part of this, rework error handling in boot/bootm.c so that we pass the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not be available to host tools but we do know the size that we passed to malloc(). Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_SYS_BOOT_RAMDISK_HIGH to KconfigTom Rini1-5/+0
This converts the following to Kconfig: CONFIG_SYS_BOOT_RAMDISK_HIGH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_SYS_FSL_CPC et al to KconfigTom Rini1-4/+0
This converts the following to Kconfig: CONFIG_SYS_FSL_CPC CONFIG_SYS_CPC_REINIT_F Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07arm: Remove PXA architecture supportTom Rini1-7/+0
With the last platform for this architecture removed, remove the rest of the architecture support as well. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-07-07Convert CONFIG_SYS_83XX_DDR_USES_CS0 to KconfigTom Rini1-4/+0
This converts the following to Kconfig: CONFIG_SYS_83XX_DDR_USES_CS0 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-06lcd: Remove legacy CONFIG_FB_ADDR codeTom Rini1-14/+0
No platforms set both CONFIG_LCD and CONFIG_FB_ADDR at this time, drop this legacy code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-06Convert CONFIG_SYS_DDR_RAW_TIMING to KconfigTom Rini1-6/+0
This converts the following to Kconfig: CONFIG_SYS_DDR_RAW_TIMING Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-06Convert CONFIG_SYS_SPD_BUS_NUM to KconfigTom Rini1-5/+0
This converts the following to Kconfig: CONFIG_SYS_SPD_BUS_NUM Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-06nxp: Cleanup some emulator related options.Tom Rini1-4/+0
- Drop the emulator CONFIG test from include/configs/ls1088ardb.h - Migrate CONFIG_SYS_FSL_DDR_EMU to a select'able option in drivers/ddr/fsl/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-29fpga: Remove CONFIG_FPGA_COUNTTom Rini1-4/+0
This define is only currently used in a single board, and always set to one. Define this within the board code and remove other references. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-29Convert CONFIG_ENV_MIN_ENTRIES et al to KconfigTom Rini1-8/+0
This converts the following to Kconfig: CONFIG_ENV_MIN_ENTRIES CONFIG_ENV_MAX_ENTRIES Cc: Michal Simek <michal.simek@amd.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-29Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to KconfigTom Rini1-5/+0
This converts the following to Kconfig: CONFIG_SYS_MPC85XX_NO_RESETVEC Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-29Convert CONFIG_LBA48 et al to KconfigTom Rini1-12/+0
This converts the following to Kconfig: CONFIG_LBA48 CONFIG_SYS_64BIT_LBA Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-29Convert CONFIG_USB_EHCI_TXFIFO_THRESH to KconfigTom Rini1-3/+0
This converts the following to Kconfig: CONFIG_USB_EHCI_TXFIFO_THRESH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-22cmd: load: add load command for memory mappedRui Miguel Silva1-0/+1
cp.b is used a lot as a way to load binaries to memory and execute them, however we may need to integrate this with the efi subsystem to set it up as a bootdev. So, introduce a loadm command that will be consistent with the other loadX commands and will call the efi API's. ex: loadm $kernel_addr $kernel_addr_r $kernel_size with this a kernel with CONFIG_EFI_STUB enabled will be loaded and then subsequently booted with bootefi command. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-22 22:40:23 +0300