summaryrefslogtreecommitdiff
path: root/README
AgeCommit message (Collapse)AuthorFilesLines
2021-10-06Convert CONFIG_SYS_NAND_U_BOOT_LOCATIONS et al to KconfigTom Rini1-3/+0
This converts the following to Kconfig: CONFIG_SYS_NAND_U_BOOT_LOCATIONS CONFIG_SYS_NAND_U_BOOT_OFFS Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-02kgdb: Remove unused serial related optionsTom Rini1-5/+0
We have a few CONFIG options for KGDB that are not referenced, remove them. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-30WS cleanup: remove excessive empty linesWolfgang Denk1-1/+0
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-21net: remove unused CONFIG_DRIVER_AT91EMAC_*Eugen Hristev1-11/+0
AT91EMAC driver is unused, thus removing. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-09-16Merge tag 'v2021.10-rc4' into nextTom Rini1-3/+0
Prepare v2021.10-rc4 Signed-off-by: Tom Rini <trini@konsulko.com> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
2021-09-14pci: Drop PCI_INDIRECT_BRIDGESimon Glass1-3/+0
This does not work with driver model so can be removed. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-08arm: Finish migration of CONFIG_MACH_TYPETom Rini1-10/+0
As this is only useful when booting with ATAGs, which are now largely disabled, remove this value for the remaining platforms. We have a few places in the code that had been testing for MACH_TYPE as a sort of internal logic. Update those to use different but still correct CONFIG symbols. Cc: Phil Sutter <phil@nwl.cc> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-01Convert CONFIG_SKIP_LOWLEVEL_INIT et al to KconfigTom Rini1-16/+0
This converts the following to Kconfig: CONFIG_SKIP_LOWLEVEL_INIT CONFIG_SKIP_LOWLEVEL_INIT_ONLY In order to do this, we need to introduce SPL and TPL variants of these options so that we can clearly disable these options only in SPL in some cases, and both instances in other cases. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-01Convert CONFIG_RAMBOOT_PBL et al to KconfigTom Rini1-9/+0
This converts the following to Kconfig: CONFIG_RAMBOOT_PBL CONFIG_SYS_FSL_PBL_PBI CONFIG_SYS_FSL_PBL_RCW Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-01Convert CONFIG_SYS_FSL_DDR4 to KconfigTom Rini1-4/+0
This converts the following to Kconfig: CONFIG_SYS_FSL_DDR4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30README: Remove some old i2c related textTom Rini1-13/+0
These sections are no longer relevant, remove. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2021-08-30tegra: Cleanup I2C supportTom Rini1-5/+0
Remove the irrelevant section from the README and remove the non-functional SPL-undef section. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30i2c: fsl_i2c: Migrate to KconfigTom Rini1-12/+0
- As there are no boards that use different values for speed / slave on different buses, use a single option. - Switch to using the common SYS_I2C_SPEED / SYS_I2C_SLAVE options. - Introduce _HAS_ options for additional buses as only the first one is common to all users. - Convert all remaining symbols to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30rcar: i2c: Migrate SYS_I2C_SH to KconfigTom Rini1-20/+0
- Migrate SYS_I2C_SH and related defines to Kconfig - Remove currently unused SYS_I2C_SH related defines - Cleanup related README section. Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_MXC et al to KconfigTom Rini1-17/+0
This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30i2c: Remove non-DM code from ihs_i2c.cTom Rini1-24/+0
This driver and it's only user are converted to DM_I2C, remove legacy code. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30ti: i2c: Convert CONFIG_SYS_OMAP24_I2C to CONFIG_SYS_I2C namespaceTom Rini1-13/+0
The omap24xx I2C driver uses its own CONFIG namespace for common I2C variables. Rather than convert more of them to Kconfig, rename these to the common I2C ones and remove the entirely unused functionality. As part of this, we make the am335x_shc platforms consistent with their intended speed values. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini1-5/+1
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30i2c: Remove unused additional legacy soft i2c bus supportTom Rini1-14/+0
Currently the legacy software i2c support is only used for a single bus. Remove all of the extra and unused support. Also update the README to not reference that, and finish removing some already badly auto-edited related text. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-02doc: Convert command-line info to rSTSimon Glass1-41/+0
Take this part of the README and put it into rST format. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28i2c: Rename CONFIG_SYS_I2C to CONFIG_SYS_I2C_LEGACYSimon Glass1-2/+5
It is quite confusing that CONFIG_SYS_I2C selects the legacy I2C and CONFIG_DM_I2C selects the current I2C. The deadline to migrate I2C is less than a year away. Also we want to have a CONFIG_I2C for U-Boot proper just like we have CONFIG_SPL_I2C for SPL, so we can simplify the Makefile rules. Rename this symbol so it is clear it is going away. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-28README: Fix hyphenation in the directory docsSimon Glass1-9/+9
Hyphens are missing in various places where the intent is to create an adjective. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-08arm: Remove edb9315a boardTom Rini1-4/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove it. This is also the last PL010_SERIAL using board, so remove those references. Cc: Sergey Kostanbaev <sergey.kostanbaev@fairwaves.ru> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove sbc8641d boardTom Rini1-2/+1
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. This is also the last of the ARCH_MPC8641/MPC8610 platforms, so remove that support as well. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-27allow opting out of WATCHDOG_RESET() from timer interruptRasmus Villemoes1-0/+9
Having WATCHDOG_RESET() called automatically from the timer interrupt runs counter to the idea of a watchdog device - if the board runs into an infinite loops with interrupts still enabled, the watchdog will never fire. When using CONFIG_(SPL_)WDT, the watchdog_reset function is a lot more complicated than just poking a few SOC-specific registers - it involves accessing all kinds of global data, and if the interrupt happens at the wrong time (say, in the middle of an WATCHDOG_RESET() call from ordinary code), that can end up corrupting said global data. Allow the board to opt out of calling WATCHDOG_RESET() from the timer interrupt handler by setting CONFIG_SYS_WATCHDOG_FREQ to 0 - as that setting is currently nonsensical (it would be compile-time divide-by-zero), it cannot affect any existing boards. Add documentation for both the existing and extended meaning of CONFIG_SYS_WATCHDOG_FREQ. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-02-28Correct U-Boot upstream repositoryHeinrich Schuchardt1-2/+2
The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-20fdt/sunxi: Remove OF_STDOUT_PATHAndre Przywara1-1/+0
OF_STDOUT_PATH was meant to hold the devicetree path to the serial console, to be put into the linux,stdout-path property of the chosen node. The only user of that was sunxi, and it was actually wrong for years there: the paths hardcoded in sunxi_common.h were not matching the DTs, evident by the leading 0's in nodenames, which have been removed years ago. On top of that, "linux,stdout-path" is now deprecated for a while (Linux commit 2a9d832cc9aae from November 2014), and also all modern DTs (including those included in U-Boot) carry a "stdout-path" property already. So remove the stanza from sunxi_common.h, and, since this was the last user, also remove the associated bits from the rest of U-Boot. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-28pci: Remove CONFIG_PCI_ENUM_ONLY as it's not used (any more)Stefan Roese1-7/+0
This patch completely removes CONFIG_PCI_ENUM_ONLY from the PCI code as it is not configured for any board (any more). With this removal, some PCI related files get cleaned up a bit. Additional, dm_pciauto_setup_device() is now static, as it's not referenced from any code outside of this C file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-18cmd: Add a pwm commandPragnesh Patel1-0/+1
Add the command "pwm" for controlling the pwm channels. This command provides pwm invert/config/enable/disable functionalities via PWM uclass drivers Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-01cmd: Kconfig: migrate CONFIG_SYS_PROMPT_HUSH_PS2Patrick Delaunay1-7/+0
Move CONFIG_SYS_PROMPT_HUSH_PS2 in Kconfig, depending on CONFIG_HUSH_PARSER, and remove the default value defined in cli_hush.c under __U_BOOT__. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-19tools: dumpimage: Remove remaining mentions of the -i optionTyler Hicks1-10/+2
The -i option of the dumpimage tool has been removed so it should no longer be documented in the README file. Refer readers to the tool's help output rather than maintain a copy of the usage in the README. Finally, adjust the example dumpfile invocation in imagetool.h to use the -o option instead of the removed -i option. Fixes: 12b831879a76 ("tools: dumpimage: Simplify arguments") Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Martyn Welch <martyn.welch@collabora.com> Acked-by: Martyn Welch <martyn.welch@collabora.com>
2020-10-22README: Convert HTTP links to HTTPSNaoki Hayama1-10/+10
Convert all the other http:// links to https:// . www.denx.de/twiki/ seems to move to www.denx.de/wiki/ , so change it. I checked all links in this patch are valid. Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-22README: vxworks: Fix typo overwrideNaoki Hayama1-1/+1
%s/overwride/override/ Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-22README: sandbox: Change reference to sandbox detailsNaoki Hayama1-1/+1
doc/arch/index.rst is a list of links to each architecture. As for the sandbox details, doc/arch/sandbox.rst looks better. Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22README: Update directory hierarchyNaoki Hayama1-1/+2
Removed: - /arch/openrisc Added: - /arch/xtensa - /env Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-22README: Update source code locationNaoki Hayama1-8/+6
This patch include these updates - Git repository has moved to GitLab - HTTPS access to the file server is allowed - pre-built images are no longer available Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-22README: Update links to mailing list archivesNaoki Hayama1-3/+2
This patch includes these updates - Change http://lists.denx.de/pipermail/u-boot to https://lists.denx.de/pipermail/u-boot - http://dir.gmane.org/gmane.comp.boot-loaders.u-boot is broken, so remove it - Another archive https://marc.info/?l=u-boot is available, so add it Additional information: dir.gmane.org has moved to news.gmane.io, but it only allows access to the archive via NNTP. - Server: news.gmane.io - Group : gmane.comp.boot-loaders.u-boot I don't include this information in this patch because it's not very useful without web interfaces. Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-18configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigsPatrick Delaunay1-6/+0
Done with: ./tools/moveconfig.py VIDEO_BMP_RLE8 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18configs: migrate CONFIG_VIDEO_BMP_GZIP to defconfigsPatrick Delaunay1-6/+0
Done with: ./tools/moveconfig.py VIDEO_BMP_GZIP The 3 suspicious migration because CMD_BMP and SPLASH_SCREEN are not activated in these defconfigs: - trats_defconfig - s5pc210_universal_defconfig - trats2_defconfig Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-05Merge branch 'next'Tom Rini1-0/+4
Bring in the assorted changes that have been staged in the 'next' branch prior to release. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-29README: Fix typo in Board Initialisation FlowNaoki Hayama1-1/+1
I suppose 'these' might be 'there'. Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-09-25x86: zboot: Set environment variables for image locationsSimon Glass1-0/+4
At present it is not possible to tell from a script where the setup block is, or where the image was loaded to. Add environment variables for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-08-23Convert CONFIG_SPLASH_SCREEN et al to KconfigSimon Glass1-42/+0
This converts the following to Kconfig: CONFIG_SPLASH_SCREEN CONFIG_SPLASH_SCREEN_ALIGN CONFIG_SPLASHIMAGE_GUARD CONFIG_SPLASH_SOURCE Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-05net: tftp: Add client support for RFC 7440Ramon Fried1-0/+5
Add support for RFC 7440: "TFTP Windowsize Option". This optional feature allows the client and server to negotiate a window size of consecutive blocks to send as an alternative for replacing the single-block lockstep schema. windowsize can be defined statically during compilation by setting CONFIG_TFTP_WINDOWSIZE, or defined in runtime by setting an environment variable: "tftpwindowsize" If not defined, the windowsize is set to 1, meaning that it behaves as it was never defined. Choosing the appropriate windowsize depends on the specific network topology, underlying NIC. You should test various windowsize scenarios and see which best work for you. Setting a windowsize too big can actually decreases performance. Signed-off-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de>
2020-07-28Convert CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to KconfigAdam Ford1-4/+0
This converts the following to Kconfig: CONFIG_SYS_MMCSD_FS_BOOT_PARTITION Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_BOOTP_SEND_HOSTNAME to KconfigAdam Ford1-8/+0
This converts the following to Kconfig: CONFIG_BOOTP_SEND_HOSTNAME Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_SPL_NAND_BASE et al to KconfigAdam Ford1-2/+0
This converts the following to Kconfig: CONFIG_SPL_NAND_BASE CONFIG_SPL_NAND_IDENT Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_SPL_NAND_DRIVERS et al to KconfigAdam Ford1-12/+0
This converts the following to Kconfig: CONFIG_SPL_NAND_DRIVERS CONFIG_SPL_NAND_ECC CONFIG_SPL_NAND_SIMPLE Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-25net: dc2114x: Add Kconfig entriesMarek Vasut1-3/+0
Add Kconfig entries for the dc2114x driver and convert various boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2020-07-09cmd: Add a memory-search commandSimon Glass1-0/+10
It is useful to be able to find hex values and strings in a memory range. Add a command to support this. cmd: Fix 'md' and add a memory-search command At present 'md.q' is broken. This series provides a fix for this. It also implements a new memory-search command called 'ms'. It allows searching memory for hex and string data. END Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-28 08:32:41 +0300