summaryrefslogtreecommitdiff
path: root/arch/arm/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-09-01Finish converting CONFIG_SYS_CACHELINE_SIZE to KconfigTom Rini1-15/+0
We move the SYS_CACHE_SHIFT_N options from arch/arm/Kconfig to arch/Kconfig, and introduce SYS_CACHE_SHIFT_4 to provide a size of 16. Introduce select statements for other architectures based on current usage. For MIPS, we take the existing arch-specific symbol and migrate to the generic symbol. This lets us remove a little bit of otherwise unused code. Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Leo <ycliang@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-09-01imx: Introduce CONFIG_MACH_IMXTom Rini1-0/+13
Currently, there is no over-arching symbol for access to arch/arm/mach-imx nor the CONFIG symbols that are common over all of these related platforms. This new CONFIG symbol will allow us to start down this path. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-01ddr: Migrate DDR_SPD to KconfigTom Rini1-0/+1
Move the symbol that controls building some JEDEC SPD support functions to Kconfig. This is required on the TI keystone 2 platforms and very frequently (but not always) used on large number of Freescale/NXP platforms, so use imply there. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30arm: Migrate GICV2 / GICV3 to KconfigTom Rini1-0/+10
Migrate CONFIG_GICV2 and CONFIG_GICV3 to Kconfig. We still have the GIC related registers that need to be handled more cleanly but start by moving this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_MXC et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-27Merge tag 'xilinx-for-v2021.10-rc3' of ↵Tom Rini1-0/+2
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.10-rc3 xilinx: - Disable CONFIG_ARCH_FIXUP_FDT_MEMORY - Print information about cpu via soc drivers and enable DISPLAY_CPUINFO - Wire infrastructure for DTB_RESELECT and MULTI_DTB_FIT zynq: - Wire single QSPI - Use power-source instead of io-standard properties - Enable nor on zc770-xm012 zynqmp: - Change handling around multi_boot() - Setup offset for u-boot.itb in spi - Generate run time dfu_alt_info for capsule update - Use explicit values for enums (zynqmp_firmware.h) - Enable RTC/SHA1/BUTTON/BUTTON_GPIO command - Disable WDT driver by default - Bind usb/scsi via preboot because of EFI - DT updates/fixes - Add soc driver - Fix SPL SPI boot mode versal: - Add soc driver sdhci: - Update tap delay programming for zynq_sdhci driver cmd: - Fix RTC uclass handling in date command - Update pwm help message - Update reset help message watchdog: - Fix wwdt compilation rtc: - Deal with seq alias in rtc uclass - Add zynqmp RTC driver fdt: - Add kernel-doc for fdt_fixup_memory_banks()
2021-08-26soc: xilinx: versal: Add soc_xilinx_versal driverT Karthik Reddy1-0/+1
soc_xilinx_versal driver allows identification of family & revision of versal SoC. This driver is selected by CONFIG_SOC_XILINX_VERSAL. Probe this driver using platdata U_BOOT_DEVICE structure which is defined at mach-versal/cpu.c. Add this config to xilinx_versal_virt_defconfig & xilinx_versal_mini_ospi_defconfig file to select this driver. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26soc: xilinx: zynqmp: Add soc_xilinx_zynqmp driverT Karthik Reddy1-0/+1
soc_xilinx_zynqmp driver allows identification of family & revision of zynqmp SoC. This driver is selected by CONFIG_SOC_XILINX_ZYNQMP. Add this config to xilinx_zynqmp_virt_defconfig file. Probe this driver using platdata U_BOOT_DEVICE structure which is specified in mach-zynqmp/cpu.c. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-12rockchip: Fix u-boot-rockchip.bin buildJohan Gunnarsson1-1/+1
Currently there are a few arm32 rockchip board configs that don't generate u-boot-rockchip.bin when running make because CONFIG_BINMAN is not enabled. This patch changes CONFIG_ARCH_ROCKCHIP to also select CONFIG_BINMAN if CONFIG_SPL and !CONFIG_ARM64. Example builds that don't generate u-boot-rockchip.bin without this patch: export ARCH=arm export CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf- make kylin-rk3036_defconfig make export ARCH=arm export CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf- make rock_defconfig make export ARCH=arm export CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf- make tinker-rk3288_defconfig make Signed-off-by: Johan Gunnarsson <johan.gunnarsson@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-09arm: imx: add i.MX8ULP basic Kconfig optionPeng Fan1-0/+11
Add i.MX8ULP related basic Kconfig option, which will be used later. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-03Merge https://source.denx.de/u-boot/custodians/u-boot-samsungTom Rini1-0/+1
2021-07-28Rename GPIO_SUPPORT to GPIOSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_WATCHDOG_SUPPORT to SPL_WATCHDOGSimon Glass1-1/+1
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_POWER_SUPPORT to SPL_POWERSimon Glass1-1/+1
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-27samsung: exynos: Convert SROMC interface to a driverSimon Glass1-0/+1
Add a bus driver for this and use it to configure the bus parameters for the Ethernet interface. Drop the old pre-driver-model code. Switch over to use driver model for Ethernet. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2021-07-19usb: Enforce DM_USB migration for USB_HOST devices.Tom Rini1-12/+3
As the deadline for migration to DM_USB, when using a USB host controller has now gone two years past the deadline, enforce migration. This is done by: - Ensuring that all host controller options (other than the very legacy old MUSB ones) now select USB_HOST. USB_HOST now enforces DM_USB and OF_CONTROL. - Remove other parts of Kconfig logic that had platforms pick DM_USB. - To keep Kconfig happy, have some select statements test for USB_HOST as well. - Re-order some Kconfig entries and menus so that we can cleanly pick host or gadget roles. For the various HCD options that have platform glue options, group them together and update dependencies in some cases. - As SPL_DM_USB is not required, on platforms that had not yet enabled it, disable it. Cc: Marek Vasut <marex@denx.de> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Samuel Holland <samuel@sholland.org> Cc: FUKAUMI Naoki <naobsd@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove spear600 boards and the rest of SPEAr supportTom Rini1-18/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is the last of the SPEAr platforms, so remove the rest of the remaining support as well. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove spear320 boardsTom Rini1-9/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is also the last SPEAR3XX platform, remove that symbol as well. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove spear310 boardsTom Rini1-9/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove spear300 boardsTom Rini1-9/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove gplugd boardTom Rini1-6/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove it Cc: Ajay Bhargav <contact@8051projects.net> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove edb9315a boardTom Rini1-7/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove it. This is also the last PL010_SERIAL using board, so remove those references. Cc: Sergey Kostanbaev <sergey.kostanbaev@fairwaves.ru> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-06board: synquacer: Add DeveloperBox 96boards EE supportMasami Hiramatsu1-0/+14
Add the DeveloperBox 96boards EE support. This board is also known as Socionext SynQuacer E-Series. It contians one "SC2A11" SoC, which has 24-cores of arm Cortex-A53, and 4 DDR3 slots, 3 PCIe slots (1 4x port and 2 1x ports which are expanded via PCIe bridge chip), 2 USB 3.0 ports and 2 USB 2.0 ports, 2 SATA ports and 1 GbE, 64MB NOR flash and 8GB eMMC on standard MicroATX Form Factor. For more information, see this page; https://www.96boards.org/product/developerbox/ Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2021-07-06gpio: Introduce CONFIG_GPIO_EXTRA_HEADER to cleanup #ifdefsMasami Hiramatsu1-0/+94
Since some SoCs and boards do not hae extra asm/arch/gpio.h, introduce CONFIG_GPIO_EXTRA_HEADER instead of adding !define(CONFIG_ARCH_XXXX) in asm/gpio.h. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2021-06-17Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini1-0/+18
- fsl-qoriq: Bug fixes related pfe, eth, thermal node, vid.c, cpu release, mmc, usb, env, etc for Layerscape boards - powerpc: Update Maintainers for some boards.
2021-06-17board/km: add support for expu1 design based on nxpAleksandar Gerasimovski1-0/+18
The EXPU1 design is a new 40G capable ethernet service unit card for Hitachi-Powergrids wired-com product lines. The base SoC is same as for already added SELI8 card, consequently the already added u-boot support for SELI8 is reused. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> [Fixed new line error at EOF] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-09imx: Add SeeedStudio NPI-IMX6ULL SupportNavin Sankar Velliangiri1-0/+1
CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 49C Reset cause: POR Model: Seeed NPi iMX6ULL Dev Board with NAND Board: Seeed NPi i.MX6ULL Dev Board DRAM: 512 MiB NAND: 512 MiB MMC: FSL_SDHC: 0 In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: FEC0 Working: - Eth0 - MMC/SD - NAND - UART 1 - USB host Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com> Note: Changes in v2: * removed unnecessary space in imx6ull-seeed-npi-imx6ull-dev-board.dts file. * Used SZ_2M for CONFIG_SYS_MALLOC_LEN size allocation.
2021-04-20arm: highbank: Do DRAM init from DTAndre Przywara1-0/+1
So far U-Boot was hard coding a (surely sufficient) memory size of 512 MB, even though all machines out there have at least 4GB of DRAM. Since U-Boot uses its memory knowledge to populate the EFI memory map, we are missing out here, at best losing everything beyond 4GB on Midway boxes (which typically come with 8GB of DRAM). Since the management processor populated the DT memory node already with the detected DRAM size and configuration, we use that to populate U-Boot's memory bank information, which is the base for the UEFI memory map. This finally allows us to get rid of the NR_DRAM_BANKS=0 hack, that we had in place to avoid U-Boot messing up the DT memory node before loading the kernel. Also, to cover the whole of memory, we need to enable PHYS_64BIT. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-20net: calxedagmac: Convert to DM_ETHAndre Przywara1-0/+1
To squash that nasty warning message and make better use of the newly gained OF_CONTROL feature, let's convert the calxedagmac driver to the "new" driver model. The conversion is pretty straight forward, mostly just adjusting the use of the involved data structures. The only actual change is the required split of the receive routine into a receive and free_pkt part. Also this allows us to get rid of the hardcoded platform information and explicit init calls. This also uses the opportunity to wrap the code decoding the MMIO register base address, to make it safe for using PHYS_64BIT later. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-20arm: highbank: Enable OF_CONTROLAndre Przywara1-1/+8
All Calxeda machines are actually a poster book example of device tree usage: the DT is loaded from flash by the management processor into DRAM, the memory node is populated with the detected DRAM size and this DT is then handed over to the kernel. So it's a shame that U-Boot didn't participate in this chain, but fortunately this is easy to fix: Define CONFIG_OF_CONTROL and CONFIG_OF_BOARD, and provide a trivial function to tell U-Boot about the (fixed) location of the DTB in DRAM. Then enable DM_SERIAL, to let the PL011 driver pick up the UART platform data from the DT. Also define AHCI, to bring this driver into the driver model world as well. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-20arch: arm: update Kconfig to select IRQ when GIC_V3_ITS is enabledWasim Khan1-0/+1
GIC_V3_ITS uses UCLASS_IRQ driver. Update Kconfig to select IRQ when GIC_V3_ITS is enabled. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2021-04-15board: sl28: enable DM_SERIALMichael Walle1-0/+1
With all preparations in place, switch over to DM_SERIAL. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15board: sl28: move DM_* configs to KconfigMichael Walle1-0/+19
Move the CONFIG_DM_* from the defconfig to the TARGET_SL28 config. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15board/km: add support for seli8 design based on nxp ls102xAleksandar Gerasimovski1-0/+19
The SELI8 design is a new tdm service unit card for Hitachi-Powergrids XMC and FOX product lines. It is based on NXP LS1021 SoC and it provides following interfaces: - IFC interface for NOR, NAND and external FPGA's - 1 x RGMII ETH for debug purposes - 2 x SGMII ETH for management communication via back-plane - 1 x uQE HDLC for management communication via back-plane - 1 x I2C for peripheral devices - 1 x SPI for peripheral devices - 1 x UART for debug logging It is foreseen that the design will be later re-used for another XMC and FOX service cards with similar SoC requirements. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-10arm: Remove Broadcom Cygnus boardsTom Rini1-7/+1
These boards have not been converted to CONFIG_DM by the deadline. Remove them. Cc: Steve Rae <steve.rae@raedomain.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove bcm23550_w1d boardTom Rini1-7/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Steve Rae <steve.rae@raedomain.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove bcm28155_ap boardTom Rini1-7/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Steve Rae <steve.rae@raedomain.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove bcm958712k boardTom Rini1-1/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove s32v234evb boardTom Rini1-6/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Eddy Petrișor <eddy.petrisor@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove vexpress_ca15_tc2 boardTom Rini1-18/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove apf27 boardTom Rini1-6/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Philippe Reynes <tremyfr@yahoo.fr> Cc: Eric Jarrige <eric.jarrige@armadeus.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-08crypto: caam: Add CAAM support to i.MX8M platformsAymen Sghaier1-0/+3
This patch enable CAAM support for i.MX8M platforms. Signed-off-by: Aymen Sghaier <aymen.sghaier@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08caam: enable support for iMX7ULPFranck LENORMAND1-0/+3
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-03-08arm: socfpga: Move Stratix10 and Agilex to use TARGET_SOCFPGA_SOC64Siew Chin Lim1-3/+3
Create common macro TARGET_SOCFPGA_SOC64 for Stratix10 and Agilex. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-02-15arm: Remove ls2080a_simu boardTom Rini1-13/+0
This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15arm: Remove mx35pdk boardTom Rini1-6/+0
This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefano Babic <sbabic@denx.de>
2021-01-12Merge tag 'ti-v2021.04-rc1' of ↵Tom Rini1-0/+1
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - DM support for OMAP PWM backlight - USB host mode support for AM654 - Minor SPI fixes - Add support k2g ice board with 1GHz silicon - Fix GTC programming for K3 devices
2021-01-12bus: ti: add minimal sysc interconnect target driverDario Binacchi1-0/+1
We can handle the sysc interconnect target module in a generic way for many TI SoCs. Initially let's just enable domain clocks before the children are probed. The code is loosely based on the drivers/bus/ti-sysc.c of the Linux kernel version 5.9-rc7. For DT binding details see: - Documentation/devicetree/bindings/bus/ti-sysc.txt Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-01-12sunxi: board: Move USB ethernet initialization to board_late_init()Andy Shevchenko1-0/+1
For the sake of consistency (*) and order of initialization, i.e. after we have got the ethernet address, interrupt and timer initialized, try to initialize USB ethernet gadget. *) for example, zynqmp uses same order. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-12-10armv8: lx2162aqds: Add support for LX2162AQDS platformMeenakshi Aggarwal1-0/+12
This patch add base support for LX2162AQDS board. LX2162AQDS board supports LX2162A family SoCs. This patch add basic support of platform. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: hui.song <hui.song_1@nxp.com> Signed-off-by: Manish Tomar <manish.tomar@nxp.com> Signed-off-by: Vikas Singh <vikas.singh@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-24 20:04:40 +0300