summaryrefslogtreecommitdiff
path: root/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
AgeCommit message (Collapse)AuthorFilesLines
2020-04-14arm: dts: k3-j721e: Increase OSPI default frequency to 50MHzVignesh Raghavendra1-1/+1
In 1 bit mode OSPI can work at upto 50MHz, this provides better write performance. Therefore increase frequency from 40MHz to 50MHz Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-03-17Merge tag 'ti-v2020.07-next' of ↵Tom Rini1-0/+89
https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next K3 J721E: * OSPI boot support * Support for loading remote cores in R5 SPL * PMIC ESM Support * Minor fixes for R5F and C7x remoteproc drivers K3 AM654: * Update AVS class 0 voltages. * Add I2C nodes DRA7xx/AM57xx: * Fixed Android boot on AM57xx AM33/AM43/Davinci: * switch to driver model for the net and mdio driver for baltos * Add DM/DTS support for omap video driver * Enable fastboot on am335x-evm
2020-03-09arm: dts: k3-j721e-r5-common-proc-board: Use unique names for dummy clocksFaiz Abbas1-2/+2
Update the dummy clock names to use unique identifiers. Otherwise the previous node just gets overwitten by the next one with the same name. This fixes eMMC boot not working on J721e-evm. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-03-06arm: dts: k3-j721e-r5-common-proc-board: Add ospi1 flash nodeKeerthy1-0/+25
Add ospi1 flash node required for QSPI boot. Signed-off-by: Keerthy <j-keerthy@ti.com>
2020-03-06arm: dts: k3-j721e: Enable ospi1/qspiKeerthy1-0/+14
Enable the ospi1/qspi for both r5 and a72 configurations. Signed-off-by: Keerthy <j-keerthy@ti.com>
2020-03-03arm: dts: k3-k721e: Add Main domain ESM supportTero Kristo1-0/+9
Main domain ESM support is needed to configure main domain watchdogs to generate ESM pin events by default. On J7 processor board these propagate to the PMIC to generate a reset when watchdog expires. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-03-03arm: dts: k3-j721e-r5: Enable r5fss0 cluster in SPLKeerthy1-0/+2
Enable MAIN domain r5fss0 cluster and its core0 in R5 spl. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-03ARM: dts: k3-j721e: Add OSPI DT nodesVignesh Raghavendra1-0/+39
Add OSPI DT nodes to enable OSPI at U-Boot prompt and also to support OSPI boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-13arm: dts: k3-j721e-r5-common-proc-board: Disable power-domains for mcu uartLokesh Vutla1-0/+4
mcu uart will be used during uart boot for loading sysfw.itb. Since sysfw is not yet available during uart load, power-domain cannot be enabled. We need to rely on ROM for doing that, so disable power-domains and clocks for mcu uart. Also fix the mcu uart frequency. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04arm: dts: k3-j721e-common-proc-board: Enable I2C expander for SPLVignesh Raghavendra1-0/+27
IO expanders are required to power cycle SD card. So enable the same Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04arm: dts: k3-j721e-common-proc-board: Enable USB0 in peripheral modeVignesh Raghavendra1-0/+18
Enable USB0 in peripheral mode so that it be used for DFU Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20arm: dts: k3-j721e-common-proc-board: Add pinmux for SD cardFaiz Abbas1-0/+16
Add pinmux for sdhci1 node connected to the SD card. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20arm: dts: k3-j721e: Add DT nodes for USBVignesh Raghavendra1-0/+7
J721e has two instances of Cadence USB3 controller. Add DT nodes for the same. USB0 is configured to device mode and USB1 is configured to host mode. For now only high speed mode is supported. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-11-08arm: dts: k3-j721e-r5-common-proc-board: Hook buck12_reg to vtm supplyKeerthy1-0/+5
Hook buck12_reg to vtm avs supply Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-08arm: dts: k3-j721e-r5-common: Add tps65941 node and dependent wkup_i2c0 nodeKeerthy1-0/+32
Add tps65941 node and dependent wkup_i2c0 node needed for AVS class 0 support Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-08arm: dts: k3-j721e-r5-common-proc-board: Add VTM nodeKeerthy1-0/+7
Add VTM node for voltage and thermal management. For u-boot, this is needed for supporting AVS class 0, as the efuse values for the OPPs are stored under the VTM. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-10-26arm: dts: k3-j721e: Add ddr nodeLokesh Vutla1-0/+2
Use the 3733MTs DDR configuration that is auto generated from DDR_Regconfig tool. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Kevin Scholz <k-scholz@ti.com>
2019-07-27arm: dts: k3-j721e: Add r5 specific dt supportLokesh Vutla1-0/+141
Add initial support for dt that runs on r5. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-29 04:19:19 +0300