summaryrefslogtreecommitdiff
path: root/arch/arm/mach-rockchip/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2020-04-02rockchip: Enable pre console for rk3399Jagan Teki1-0/+1
Enable pre console buffer for rk3399 platform. This would help to capture the console messages prior to the console being initialised. Enabling this would help to capture all the console messages on video output source like HDMI. So we can find the full console messages of U-Boot proper on HDMI display when enabled it for RK3399 platform boards. Buffer address used for pre console is 0x0f200000 which is ram base plus 240MiB. right now the Allwinner SoC is using similar computation. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-02-19rockchip: rk3288: Enable pre console bufferJagan Teki1-0/+1
Enable pre console buffer for rk3288 platform. This would help to capture the console messages prior to the console being initialised. Enabling this would help to capture all the console messages on video output source like HDMI. So we can find the full console messages of U-Boot proper on HDMI display when enabled it for RK3288 platform boards. Buffer address used for pre console is 0x0f000000 which is ram base plus 240MiB. right now the Allwinner SoC is using similar computation. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30rockchip: rk3399: Add bootcount supportJagan Teki1-0/+2
Add bootcount support for Rockchip rk3399. The bootcount value is preserved in PMU_SYS_REG0 register, this would help to support redundent boot. Once the redundant boot triggers, the altboot command will look for extlinux-rollback.conf on particular bootable partition which supposed to be a recovery partition where redundant boot required. Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-12-27rockchip: add description for TPL_ROCKCHIP_COMMON_BOARDThomas Hebb1-1/+1
SPL_ROCKCHIP_COMMON_BOARD, an almost identical option, has a title but this one doesn't for some reason. Add a description to make the menu easier to read. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-03cosmetic: Fix spelling and whitespace errorsThomas Hebb1-1/+1
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-11-17arm: rockchip: Add RK3308 SOC supportAndy Yan1-0/+24
RK3308 is a quad Cortex A35 based SOC with rich audio interfaces(I2S/PCM/TDM/PDM/SPDIF/VAD/HDMI ARC), which designed for intelligent voice interaction and audio input/output processing. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: add px30 architecture coreHeiko Stuebner1-0/+23
Add core architecture code to support the px30 soc. This includes a separate tpl board file due to very limited sram size as well as a non-dm sdram driver, as this also has to fit into the tiny sram. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rk3399: migrate to use common codeYouMin Chen1-0/+1
For there are some structures and functions are common for all rockchip SoCs, migrate to use the common code so that we can clean up reduandent codes. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rk3328: use common sdram driverYouMin Chen1-0/+1
RK3328 has a similar controller and phy with PX30, so we can use the common driver for it and remove the duplicate codes. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05rockchip: Kconfig: enable TPL support for rk3328Kever Yang1-0/+5
Enable TPL support and some related option in Kconfig. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from commit https://github.com/rockchip-linux/u-boot/commit/430b01462bf3f24aaf7920ae2587a6943c39ab5d with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rv1108: Migrate to use common board fileKever Yang1-0/+1
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: Migrate to use common board fileKever Yang1-0/+1
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3368: Migrate to use common board fileKever Yang1-0/+1
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: Migrate to use common board fileKever Yang1-0/+1
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
2019-07-29rockchip: rk3288: Migrate to use common board fileKever Yang1-0/+1
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: Migrate to use common board fileKever Yang1-0/+1
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk322x: Migrate to use common board fileKever Yang1-0/+1
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3128: Migrate to use common board fileKever Yang1-0/+1
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3036: Migrate to use common board fileKever Yang1-0/+1
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: add common board file for U-Boot properKever Yang1-0/+7
Add common board file for Rockchip SoCs to avoid too much copy-paste work for different SoCs. This board file in charge for common board_init() and board_late_init() in U-Boot proper. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: Migrate to use common spl board fileKever Yang1-0/+1
rk3399 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3368: migrate to use common spl board fileKever Yang1-0/+1
rk3368 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: migrate to use common spl board fileKever Yang1-0/+1
rk3328 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: Migrate to use common spl board fileKever Yang1-0/+1
rk3288 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: move setup_led() to firefly-rk3288Kever Yang1-1/+0
Only firefly-rk3288 has the dts node "u-boot,boot-led", while CONFIG_SPL_LED is not enable, move code to firefly-rk3288 now in case someone need this code. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk322x: migrate to use common spl board fileKever Yang1-0/+1
rk322x has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: migrate to use common spl board fileKever Yang1-0/+1
rk3188 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: Migrate to use BOOTROM_SUPPORT driverKever Yang1-6/+3
SPL bootrom support is a boot device just like mmc and etc, use formal boot device instead of jump to bootrom directly. Enable the Kconfig by default if ROCKCHIP_BACK_TO_BROM is enabled. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: add common spl board fileKever Yang1-0/+8
The common spl board file handles board_init_f() in SPL, and with board_early_init_f() and arch_cpu_init() callback, other operateion after board_init_f() should go to board specific spl_board_init(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: enable rk322x TPL_BOOTROM_SUPPORT in KconfigKever Yang1-0/+1
The TPL_BOOTROM_SUPPORT is needed for boot from bootrom like other storages. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3399: use common TPL board fileKever Yang1-0/+1
Use common tpl.c instead of rk3399-board-tpl.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3399: remove TPL_BOARD_INITKever Yang1-1/+0
RK3399 TPL do not need a dedicate board init, print the firmware info when debug init instead. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3368: use common TPL board fileKever Yang1-0/+1
Use common tpl.c instead of rk3368-board-tpl.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: use common TPL board fileKever Yang1-0/+1
Use Common tpl.c instead of rk3288-board-tpl.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk322x: use common TPL board fileKever Yang1-0/+1
Use Common tpl.c instead of rk322x-board-tpl.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: add common tpl board fileKever Yang1-0/+9
Rockchip SoCs have similar boot process, prefer to use TPL for DRAM init and back to bootrom, and SPL as Trust ATF/U-Boot loader. TPL common board is a basic TPL board init which can be shared for most of SoCs to avoid copy-pase for different SoCs. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: Kconfig: move ROCKCHIP_BOOT_MODE_REG to soc KconfigKever Yang1-8/+0
Rockchip SoCs have different ROCKCHIP_BOOT_MODE_REG value, move it to SoC's own Kconfig, and add address for rk3128 and rk3328 so that all SoCs have available address. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: Kconfig: move rk3399 config into its KconfigKever Yang1-16/+0
Each SoC have its config setting and its Kconfig, move the specific setting to its own Kconfig file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: Kconfig: move rk3368 config into its KconfigKever Yang1-13/+0
Each SoC have its config setting and its Kconfig, move the specific setting to its own Kconfig file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: Kconfig: move rk3288 config into its KconfigKever Yang1-13/+0
Each SoC have its config setting and its Kconfig, move the specific setting to its own Kconfig file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: Kconfig: move rk322x config into its KconfigKever Yang1-13/+0
Each SoC have its config setting and its Kconfig, move the specific setting to its own Kconfig file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02rockchip: rk3288: add separate TPL STACK addressKever Yang1-0/+4
TPL is at SRAM while other stage is at SDRAM, so it needs separate STACK. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-02rockchip: rk3288: enable TPL configs to chip levelKever Yang1-0/+14
More boards other than vyasa needs TPL, so enable the TPL configs at chip level instead of board level. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26rockchip: rk3399: Enable TPL_BOARD_INITJagan Teki1-0/+1
Enable TPL_BOARD_INIT, this would help us to show TPL boot prints. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26rockchip: rk3399: Enable SPL_BOARD_INITJagan Teki1-0/+1
Enable SPL_BOARD_INIT globally to rk3399, this would help to print the SPL banner during bootup. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26rockchip: Kconfig: enable SPL support for rk3328Kever Yang1-0/+7
Enable SPL support and some related option in Kconfig. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from https://github.com/rockchip-linux/u-boot/commit/430b01462bf3f24aaf7920ae2587a6943c39ab5d with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
2019-05-08arm: rockchip: rk3399: Move common configs in KconfigJagan Teki1-0/+16
Few SPL and U-Boot proper configs are common to all rk3399 target defconfigs, move them and select it from platform kconfig. Moved configs: - SPL_ATF - SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF - SPL_LOAD_FIT - SPL_CLK if SPL - SPL_PINCTRL if SPL - SPL_RAM if SPL - SPL_REGMAP if SPL - SPL_SYSCON if SPL - CLK - FIT - PINCTRL - RAM - REGMAP - SYSCON - DM_PMIC - DM_REGULATOR_FIXED Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08rockchip: rk3399: add tpl supportKever Yang1-1/+33
Rockchip platform suppose to use TPL(run in SRAM) as dram init and SPL(run in DDR SDRAM) as pre-loader, so that the SPL would not be limited by SRAM size. This patch add rk3399-board-tpl.c and its common configs. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08rockchip: rk322x: add tpl supportKever Yang1-0/+26
Move original spl to tpl, and add spl to load next stage firmware, adapt all the address and option for them. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-01rockchip: enable DEBUG_UART_BOARD_INIT by defaultKever Yang1-4/+0
All Rockchip SoCs use DEBUG_UART_BOARD_INIT to init per board UART IOMUX, enable it by default. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-12 10:53:45 +0300