summaryrefslogtreecommitdiff
path: root/arch/sandbox
AgeCommit message (Collapse)AuthorFilesLines
2017-12-13power: extend prefix match to regulator-name propertyFelix Brack1-0/+6
This patch extends pmic_bind_children prefix matching. In addition to the node name the property regulator-name is used while trying to match prefixes. This allows assigning different drivers to regulator nodes named regulator@1 and regulator@10 for example. I have discarded the idea of using other properties then regulator-name as I do not see any benefit in using property compatible or even regulator-compatible. Of course I am open to change this if there are good reasons to do so. Signed-off-by: Felix Brack <fb@ltec.ch> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-07Revert "sandbox: remove os_putc() and os_puts()"Simon Glass1-0/+11
While sandbox works OK without the special-case code, it does result in console output being stored in the pre-console buffer while sandbox starts up. If there is a crash or a problem then there is no indication of what is going on. For ease of debugging it seems better to revert this change. This reverts commit 47b98ad0f6779485d0f0c14f337c3eece273eb54. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-17sandbox: Add clrbits/setbits macrosTom Rini1-0/+57
We borrow the macros for these functions from ARM and remove references to '__raw_'. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-09sandbox: avoid memory leak in os_dirent_lsHeinrich Schuchardt1-6/+14
Realloc does not free the old memory area if it fails. Identified by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-03sandbox: Expand list of IO accessorsMaxime Ripard1-0/+47
The setbits/clrbits/clrsetbits macros are used widely across the tree, let's provide implementation for them in the sandbox. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03sandbox: Use asm-generic/io.hPaul Burton2-10/+20
Convert the sandbox architecture to make use of the new asm-generic/io.h to provide address mapping functions. As sandbox actually performs non-identity mapping between physical & virtual addresses we can't simply make use of the generic mapping functions, but are able to implement phys_to_virt() & make use of it from map_physmem(). Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2017-09-12dm: test: replace dm_scan_dt() by of dm_extended_scan_fdt() in dm_do_testPatrice Chotard1-4/+6
This allows to scan the DT including all "clocks" node's sub-nodes in which fixed-clock are defined. All fixed-clock should be defined inside a clocks node which collect all external oscillators. Until now, all clocks sub-nodes can't be binded except if the "simple-bus" compatible string is added which is a hack. Update test.dts by moving clk_fixed node inside clocks. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-12sandbox: Convert SANDBOX_BITS_PER_LONG to KconfigBin Meng1-0/+5
Convert SANDBOX_BITS_PER_LONG to Kconfig and assign it a correct number depending on which host we are going to build and run. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-12sandbox: Introduce Kconfig option for 32/64 bit hostBin Meng1-0/+17
It seems most of the time we are building and running sandbox on 64-bit host. But we do support 32-bit host as well. Introduce Kconfig option for this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-28sandbox: Add a dummy invalidate_dcache_range() functionBin Meng1-0/+4
This adds invalidate_dcache_range() so that some drivers can build without error on sandbox. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-28sandbox: remove os_putc() and os_puts()Masahiro Yamada1-11/+0
They are unused since commit d8c6fb8cedbc ("sandbox: Drop special case console code for sandbox"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-07-27sandbox: use CONFIG_VAL(SYS_MALLOC_F_LEN) to distinguish malloc pool size ↵Andy Yan1-1/+1
before relocation SPL and normal u-boot stage use different malloc pool size configuration before relocation, so use CONFIG_VAL(SYS_MALLOC_F_LEN) to fit different boot stage. Signed-off-by: Andy Yan <andyshrk@gmail.com> Changes in v3: - use CONFIG_VAL(), which suggested by Simon Changes in v2: None arch/sandbox/cpu/start.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11sandbox: Stop printing platdata at the start of SPLSimon Glass1-11/+0
Currently we have code which prints out platform data at the start of SPL. Now that we have tests for dtoc this is probably not necessary. Drop it. Update test_ofplatdata to check for empty output since it is useful to check that sandbox_spl works as expected. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-11sandbox: Enable more console optionsSimon Glass1-0/+1
Enable the pre-console buffer, displaying the model and post-relocation console announce on sandbox. Also add a model name to the device tree. This allows testing of these features. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-11dm: core: Test uclass_first/next_device() on probe failureSimon Glass1-0/+19
Add some tests which check the behaviour of uclass_first_device() and uclass_next_device() when probing of a device fails. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-09sandbox: Fix comparison of unsigned enum expression warningTom Rini1-1/+1
In os_dirent_get_typename() we are checking that type falls within the known values of the enum os_dirent_t. With clang-3.8 testing this value as being >= 0 results in a warning as it will always be true. This assumes of course that we are only given valid data. Given that we want to sanity check the input, we change this to check that it falls within the range of the first to the last entry in the given enum. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05bootstage: Require timer_get_boot_us() to be definedSimon Glass1-0/+11
At present we provide a default version of this function for use by bootstage. However it uses the system timer and therefore likely requires driver model. This makes it impossible to time driver-model init. Drop the function and require boards to provide their own. Add a sandbox version also. There is a default implememtation in lib/time.c for boards which use CONFIG_SYS_TIMER_COUNTER. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05sandbox: Make u-boot-sandbox.h a private headerSimon Glass1-0/+1
Rather than including this arch-specific header file in common.h, include it from within sandbox's u-boot.h header. Also drop the comment about something to be fixed. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01sandbox: Add a way to reset sandbox state for testsSimon Glass2-4/+18
Running a new test should reset the sandbox state to avoid tests interferring with each other. Move the existing state-reset code into a function so it can be used from tests. Also update the code to reset the SPI devices and adjust the test code to call it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: blk: Improve block device claimingSimon Glass1-1/+11
The intention with block devices is that the device number (devnum field in its descriptor) matches the alias of its parent device. For example, with: aliases { mmc0 = "/sdhci@700b0600"; mmc1 = "/sdhci@700b0400"; } we expect that the block devices for mmc0 and mmc1 would have device numbers of 0 and 1 respectively. Unfortunately this does not currently always happen. If there is another MMC device earlier in the driver model data structures its block device will be created first. It will therefore get device number 0 and mmc0 will therefore miss out. In this case the MMC device will have sequence number 0 but its block device will not. To avoid this, allow a device to request a device number and bump any existing device number that is using it. This all happens during the binding phase so it is safe to change these numbers around. This allows device numbers to match the aliases in all circumstances. Add a test to verify the behaviour. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: Use dm.h header when driver mode is usedSimon Glass1-0/+1
This header includes things that are needed to make driver build. Adjust existing users to include that always, even if other dm/ includes are present Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-09dm: test: Add tests for the generic PHY uclassJean-Jacques Hiblot1-0/+17
Those tests check: - the ability for a phy-user to get a phy based on its name or its index - the ability of a phy device (provider) to manage multiple ports - the ability to perform operations on the phy (init,deinit,on,off) - the behavior of the uclass when optional operations are not implemented Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-08dm: Simple Watchdog uclassmaxims@google.com2-0/+13
This is a simple uclass for Watchdog Timers. It has four operations: start, restart, reset, stop. Drivers must implement start, restart and stop operations, while implementing reset is optional: It's default implementation expires watchdog timer in one clock tick. Signed-off-by: Maxim Sloyko <maxims@google.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-27dm: sandbox: pwm: Add a basic pwm testSimon Glass1-0/+8
Unfortunately a test for the PWM uclass was not included when it was submitted. This was noticed when trying to add more functionality: http://patchwork.ozlabs.org/patch/748172/ Add a simple test to get us started. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-15sandbox: Add some test LEDsSimon Glass1-0/+14
Add some LEDs to the standard sandbox device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ziping Chen <techping.chan@gmail.com>
2017-04-13sandbox: Change CONFIG_SANDBOX_BITS_PER_LONG to hard-codedTom Rini1-1/+5
Instead of having CONFIG_SANDBOX_BITS_PER_LONG in sandbox.h set to 64 with a comment to change to 32 on a 32bit host, simply set this to 64 in asm/types.h and have the comment be there. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-05board_f: sandbox: Move sandbox_early_getopt_check() into misc_init_f()Simon Glass1-0/+5
We don't need a special hook for sandbox as one of the later ones will do just as well. We can print error messages about bad options after we print the banner. In fact, it seems better. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05board_f: sandbox: Move setup_ram_buf() to private codeSimon Glass1-0/+7
There is no need to have this call in the generic init sequence and no other architecture has needed it in the time it has been there. Move it into sandbox's private code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2017-02-08dtoc: Replace dot with underscore to avoid compiler errorsSimon Glass1-0/+5
If there is a '.' in a compatible string, then dtoc will produce a struct with a name containing a '.'. This won't work, so replace it with '_'. Also add a suitable test to the sandbox device tree to catch this. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-09spl: sandbox: Drop spl_board_announce_boot_device()Simon Glass1-14/+3
This function is not used anymore. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-09spl: Add a name to the SPL load-image methodsSimon Glass1-1/+1
It is useful to name each method so that we can print out this name when using the method. Currently this happens using a separate function. In preparation for unifying this, add a name to each method. The name is only available if we have libcommon support (i.e can use printf()). Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-03libfdt: replace ARCH_FIXUP_FDT with ARCH_FIXUP_FDT_MEMORYMasahiro Yamada1-0/+5
Commit e2f88dfd2d96 ("libfdt: Introduce new ARCH_FIXUP_FDT option") allows us to skip memory setup of DTB, but a problem for ARM is that spin_table_update_dt() and psci_update_dt() are skipped as well if CONFIG_ARCH_FIXUP_FDT is disabled. This commit allows us to skip only fdt_fixup_memory_banks() instead of the whole of arch_fixup_fdt(). It will be useful when we want to use a memory node from a kernel DTB as is, but need some fixups for Spin-Table/PSCI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Simon Glass <sjg@chromium.org> Fixed build error for x86: Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-28drivers/pci/Kconfig: Add PCITom Rini1-7/+0
Add 'PCI' as a menu option and migrate all existing users. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2016-10-19efi: Use asmlinkage for EFIAPISimon Glass1-0/+0
This is required for x86 and is also correct for ARM (since it is empty). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-11sandbox/fs: Set correct filetype for unknown filetypeStefan Brüns1-0/+2
The "hostfs ls" command prefixes each directory entry with either DIR, LNK or " " if it is a directory, symlink resp. regular file, or "???" for any other or unknown type. The latter only works if the type is set correctly, as the entry defaults to OS_FILET_REG and e.g. socket files show up as regular files. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-11sandbox: Use the address in readl/writel() functionsSimon Glass1-6/+6
At present these functions do not touch addr, which can raising warnings about unused variables. This fixes the following warnings: sandbox_spl defconfig drivers/core/regmap.c: In function ‘regmap_read’: drivers/core/regmap.c:125:12: warning: unused variable ‘ptr’ [-Wunused-variable] uint32_t *ptr = map_physmem(map->base + offset, 4, MAP_NOCACHE); ^ drivers/core/regmap.c: In function ‘regmap_write’: drivers/core/regmap.c:134:12: warning: unused variable ‘ptr’ [-Wunused-variable] uint32_t *ptr = map_physmem(map->base + offset, 4, MAP_NOCACHE); Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 3bfb8cb4 (dm: regmap: Implement simple regmap_read & regmap_write)
2016-10-11sandbox/fs: Use readdir instead of deprecated readdir_rStefan Brüns1-8/+11
Using readdir_r limits the maximum file name length and may even be unsafe, and is thus deprecated in since glibc 2.24. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-11sandbox/fs: Use correct size path name bufferStefan Brüns1-3/+10
The readdir linux manpage explicitly states (quoting POSIX.1) that sizeof(d_name) is not correct for determining the required size, but to always use strlen. Grow the buffer if needed. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-11sandbox/fs: Make linking of nodes in os_dirent_ls more obviousStefan Brüns1-2/+2
Previously, after reading/creating the second dirent, the second entry would be chained to the first entry and the first entry would be linked to head. Instead, immediately link the first entry to head. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-06spl: Pass spl_image as a parameter to load_image() methodsSimon Glass1-1/+2
Rather than having a global variable, pass the spl_image as a parameter. This avoids BSS use, and makes it clearer what the function is actually doing. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Convert spl_board_load_image() to use linker listSimon Glass1-1/+2
Add a linker list declaration for this method and remove the explicit switch() code. Update existing users. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Convert boot_device into a structSimon Glass1-1/+1
At present some spl_xxx_load_image() functions take a parameter and some don't. Of those that do, most take an integer but one takes a string. Convert this parameter into a struct so that we can pass all functions the same thing. This will allow us to use a common function signature. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Move spl_board_load_image() into a generic headerSimon Glass1-8/+0
At present this is only used on ARM and sandbox, but it is just as applicable to other architectures. Move the function prototype into the generic SPL header. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-02sandbox, x86: select DM_KEYBOARD instead of default y entryMasahiro Yamada1-3/+0
Once we migrate to DM-based drivers, we cannot go back to legacy ones, i.e. config options like DM_* are not user-configurable. Make SANDBOX and X86 select DM_KEYBOARD like other platforms do. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-24Remove arch/${ARCH}/include/asm/errno.hMasahiro Yamada1-1/+0
Unlike Linux, nothing about errno.h is arch-specific in U-Boot. As you see, all of arch/${ARCH}/include/asm/errno.h is just a wrapper of <asm-generic/errno.h>. Actually, U-Boot does not export headers to user-space, so we just have to care about the consistency in the U-Boot tree. Now all of include directives for <asm/errno.h> are gone. Deprecate <asm/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-08-20cmd: Split 'bootz' and 'booti' out from 'bootm'Tom Rini1-0/+1
The bootz and booti commands rely on common functionality that is found in common/bootm.c and common/bootm_os.c. They do not however rely on the rest of cmd/bootm.c to be implemented so split them into their own files. Have various Makefiles include the required infrastructure for CONFIG_CMD_BOOT[IZ] as well as CONFIG_CMD_BOOTM. Move the declaration of 'images' over to common/bootm.c. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-07-28Add a power domain framework/uclassStephen Warren2-0/+31
Many SoCs allow power to be applied to or removed from portions of the SoC (power domains). This may be used to save power. This API provides the means to control such power management hardware. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-15Merge git://git.denx.de/u-boot-dmTom Rini11-3/+217
2016-07-15sandbox: Add a test device that uses of-platdataSimon Glass2-0/+48
Start up the test devices. These print out of-platdata contents, providing a check that the of-platdata feature is working correctly. The device-tree changes are made to sandbox.dts rather than test.dts. since the former controls the of-platdata generation. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-15sandbox: Add a new sandbox_spl boardSimon Glass2-1/+30
It is useful to be able to build SPL for sandbox. It provides additional build coverage and allows SPL features to be tested in sandbox. However it does not need worthwhile to always create an SPL build. It nearly doubles the build time and the feature is (so far) seldom used. So for now, create a separate build target for sandbox SPL. This allows experimentation with this new feature without impacting existing workflows. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-28 12:55:51 +0300