summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2018-05-23arm: armv7m: Clean up some thumb / compiler flag optionsTom Rini3-1/+3
- The correct way to build with thumb mode is to select SYS_THUMB_BUILD - We should be setting -march=armv7-m in arch/arm/Makefile not the sub-config.mk file. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-23at91: Minor tweaks to SPL logic for space savings on smartwebTom Rini4-4/+6
- spl_board_init is empty on smartweb so drop that function - When CONFIG_AT91SAM9_WATCHDOG is set we do not disable the watchdog in SPL and instead let full U-Boot handle it. Instead of an empty function just do not call a function. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-22ARM: dts: uniphier: sync with Linux 4.17-rc6Masahiro Yamada4-3/+11
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-22ARM: uniphier: rename environment variable fdt_file to fdtfileMasahiro Yamada1-2/+2
For booting Linux in the generic distro mechanism, cmd/pxe.c retrieves the FDT file name from "fdtfile" environment variable. Rename "fdt_file" to "fdtfile" for easier migration to distro boot. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-22ARM: dts: uniphier: change phy-mode to 'internal' for LD11Kunihiko Hayashi1-1/+1
Change the phy-mode property to 'internal' that means to use a built-in PHY implemented on LD11 SoC. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-22ARM: dts: uniphier: add clock-names and reset-names to ethernet nodeKunihiko Hayashi5-0/+12
Add clock-names and reset-names because this node recognizes multiple clocks and resets. ("ether", and so on, for each) Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-22ARM: dts: uniphier: add required clocks and resets to Pro4 ethernet nodeKunihiko Hayashi1-2/+3
The GIO clock/reset, another MAC clock, and the PHY clock are required for the ethernet of Pro4 SoC. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-22ARM: dts: uniphier: add syscon-phy-mode property to each ethernet nodeKunihiko Hayashi5-1/+7
Add syscon-phy-mode property specifying a phandle of system controller to each ethernet node. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-20SPDX: Fixup SPDX tags in a few new filesTom Rini1-2/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-20Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini14-10586/+8
2018-05-20Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini1-3/+0
2018-05-20Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini39-1383/+2809
2018-05-20ARM: rmobile: Unify Gen2 Makefile entryMarek Vasut1-7/+3
Drop per-SoC Makefile entries and replace them with one unified entry now that the PFC tables are gone. Shuffle the Makefile around a bit to make it more organized. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-20ARM: rmobile: Drop old R8A7794 PFC tablesMarek Vasut4-1930/+1
All the boards use new modern PFC framework, the old PFC tables are no longer used, so remove them. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-20ARM: rmobile: Drop old R8A7793 PFC tablesMarek Vasut4-2367/+1
All the boards use new modern PFC framework, the old PFC tables are no longer used, so remove them. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-20ARM: rmobile: Drop old R8A7792 PFC tablesMarek Vasut4-2525/+1
All the boards use new modern PFC framework, the old PFC tables are no longer used, so remove them. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-20ARM: rmobile: Drop old R8A7791 PFC tablesMarek Vasut4-1558/+1
All the boards use new modern PFC framework, the old PFC tables are no longer used, so remove them. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-20ARM: rmobile: Drop old R8A7790 PFC tablesMarek Vasut4-2204/+1
All the boards use new modern PFC framework, the old PFC tables are no longer used, so remove them. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-20ARM: rmobile: Update V2H BlancheMarek Vasut2-0/+5
The V2H Blanche port was broken since some time. This patch updates the V2H Blanche port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-19Fixup various SPDX tags from the latest mergeTom Rini14-28/+14
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-18arm64: zynqmp: Use DWC3 generic driver and DM_USBMichal Simek1-3/+0
Remove harcoded XHCI lists and detect mode, speed based on DT. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Serial-changes: 2 - Remove also XHCI macros from hardware.h - Remove additional new line in zcu106
2018-05-18Merge git://git.denx.de/u-boot-imxTom Rini38-85/+855
2018-05-18arm: dts: socfpga: stratix10: update dtsi and dtsLey Foon Tan2-5/+20
Update dtsi and dts files for resets, phy node and other properties. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-05-18arm: socfpga: misc: Add CONFIG_SYS_L2_PL310 switchLey Foon Tan1-0/+4
Preparation for Stratix 10 enablement. In ARM64, L2 cache controller is accessed through processor registers. So, add CONFIG_SYS_L2_PL310 switch conditional build in order this file can by shared across other SOCFPGAs. Signed-off-by: Chin Liang See <chin.liang.see@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-05-18arm: socfpga: stratix10: Add pinmux support for Stratix10 SoCLey Foon Tan5-1/+329
Add pinmux driver support for Stratix SoC Signed-off-by: Chin Liang See <chin.liang.see@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-05-18arm: socfpga: stratix10: Add reset manager driver for Stratix10 SoCLey Foon Tan5-0/+272
Add Reset Manager driver support for Stratix SoC Signed-off-by: Chin Liang See <chin.liang.see@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-05-18arm: socfpga: stratix10: Add clock manager driver for Stratix10 SoCLey Foon Tan7-2/+691
Add Clock Manager driver support for Stratix SoC Signed-off-by: Chin Liang See <chin.liang.see@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-05-18arm: socfpga: stratix10: Add watchdog and firewall base addressesLey Foon Tan1-0/+11
Add the base address for watchdog and firewall. Signed-off-by: Chin Liang See <chin.liang.see@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-05-18ARM: socfpga: Fix Documentation errors in scu_registersBen Kalo1-2/+2
According to ARM Cortex-A9 MPCore TRM section 2.2 - SCU registers Access Control register offset is 0x50. Signed-off-by: Ben Kalo <ben.h.kalo@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
2018-05-18ARM: socfpga: Adding SoCFPGA info for both SPL and U-BootTien Fong Chee3-5/+10
SoC FPGA info is required in both SPL and U-Boot. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2018-05-18ARM: socfpga: Adding clock frequency info for U-BootTien Fong Chee1-0/+7
Clock frequency info is required in U-Boot because info would be erased when transition from SPL to U-Boot. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2018-05-18configs: Add DDR Kconfig support for Arria 10Tien Fong Chee1-0/+1
This patch enables DDR Kconfig support for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2018-05-18ARM: socfpga: Add DDR driver for Arria 10Tien Fong Chee2-0/+4
Add DDR driver support for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2018-05-18ARM: socfpga: Add DRAM bank size initialization functionTien Fong Chee1-0/+7
Add function for both multiple DRAM bank and single DRAM bank size initialization. This common functionality could be used by every single SOCFPGA board. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Tested-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-05-18ARM: socfpga: Rename the gen5 sdram driver to more specific nameTien Fong Chee2-429/+445
Current sdram driver is only applied to gen5 device, hence it is better to rename sdram driver to more specific name which is related to gen5 device. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2018-05-18ARM: socfpga: Repair A10 EMAC reset handlingMarek Vasut4-66/+87
The EMAC reset and PHY mode configuration was never working on the Arria10 SoC, fix this. This patch pulls out the common code into misc.c and passes the SoC-specific function call in as a function pointer. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-05-18ARM: socfpga: Synchronize Arria10 SoCDK SDMMC handoffMarek Vasut1-432/+302
Regenerate Altera Arria 10 SoCDK SDMMC handoff file using latest Quartus to get the new set of clock bindings in. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-05-18ARM: socfpga: Synchronize Arria10 DTsMarek Vasut3-324/+482
Synchronize Altera Arria 10 DT sources with Linux 4.16.3 as of commit ef8216d28a5920022cddcb694d2d75bd1f0035ca Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-05-18ARM: socfpga: Sort the DT MakefileMarek Vasut1-4/+4
Sort the Makefile entries, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-05-18ARM: socfpga: Sync A10 clock manager binding parserMarek Vasut2-49/+111
The A10 clock manager parsed DT bindings generated by Quartus the bsp-editor to configure the A10 clocks. Sadly, those DT bindings changed at some point. The clock manager patch used the old ones, this patch replaces the bindings parser with one for the new set. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-05-18ARM: socfpga: Convert to DM serialMarek Vasut3-0/+6
Pull the serial port configuration from DT and use DM serial instead of having the serial configuration in two places, DT and board config. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-05-18ARM: socfpga: Clean up Kconfig entriesMarek Vasut2-35/+15
Shuffle the default Kconfig entries around so it is not such a mess. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-05-18ARM: socfpga: Zap CONFIG_SOCFPGA_VIRTUAL_TARGETMarek Vasut5-30/+0
This was never used, is not used anywhere and is just in the way by adding annoying ifdeffery. Get rid of it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-05-18arm: imx53: Add support for imx53 boards from K+PLukasz Majewski2-0/+147
This commit adds support for DDC and HSC boards from K+P in u-boot. Console output: U-Boot 2018.05-rc2-00090-g752b7ed6f9 (Apr 26 2018 - 14:24:24 +0200) CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: WDOG Model: K+P iMX53 DRAM: 512 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial Out: serial Err: serial Module EEPROM: ID: TQMa53-CB.0401 SN: 63152762 MAC: 00:0b:64:03:14:2a BBoard:40x0 Rev:10 Net: eth0: ethernet@63fec000 Hit any key to stop autoboot: 0 Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-05-18sandbox: Enable support for MC34708 PMIC in DTSLukasz Majewski4-0/+45
This commit also provides the default values of the emulated MC34708 PMIC internal registers content. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18i.MX6DL: mamoj: Add PFUZE100 supportJagan Teki2-0/+115
MX6DL Mamoj boards has Freescale PFUZE100 PMIC, add support for it through DM_PMIC dt definition. pmic log: Reviewed-by: Stefano Babic <sbabic@denx.de> ======== => pmic list | Name | Parent name | Parent uclass @ seq | pfuze100@08 | i2c@021f8000 | i2c @ 3 => pmic dev pfuze100@08 dev: 0 @ pfuze100@08 => pmic dump Dump pmic: pfuze100@08 registers 0x00: 10 00 00 21 00 01 3f 01 00 7f 00 00 00 00 00 81 0x10: 00 00 3f 00 00 00 00 00 00 00 00 10 00 00 00 00 0x20: 2b 2b 2b 08 c4 00 00 00 00 00 00 00 00 00 2b 2b 0x30: 2b 08 c4 00 00 72 72 72 08 d4 00 00 2c 2c 2c 08 0x40: e4 00 00 2c 2c 2c 08 e4 00 00 6f 6f 6f 08 f4 00 0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x60: 00 00 00 00 00 00 48 00 00 00 10 06 1e 1e 17 10 0x70: 1a 1f 00 00 00 00 00 00 00 00 00 00 00 00 00 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
2018-05-18i.MX6DL: mamoj: Add I2C supportJagan Teki2-0/+29
i.MX6DL Mamoj has i2c3 and i2c4 buses, add support through DM_I2C with dt definition. i2c log: Reviewed-by: Stefano Babic <sbabic@denx.de> ======= => i2c bus Bus 2: i2c@021a8000 Bus 3: i2c@021f8000 => i2c dev 2 Setting bus to 2 => i2c speed 400000 Setting bus speed to 400000 Hz => i2c probe Valid chip addresses: 20 51 53 => i2c md 53 0xff 00ff: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ => i2c md 51 0xff 00ff: a8 08 40 50 09 43 46 52 42 18 80 8e ae a9 d0 53 ..@P.CFRB......S => i2c dev 3 Setting bus to 3 => i2c speed 100000 Setting bus speed to 100000 Hz => i2c probe Valid chip addresses: 08 40 48 4B => i2c md 08 0xff 00ff: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
2018-05-18i.MX6: board: Add BTicino i.MX6DL Mamoj initial supportJagan Teki4-0/+129
Add initial support for i.MX6DL BTicino Mamoj board. Mamoh board added: - SPL - SPL_DM - SPL_OF_CONTROL - DM for U-Boot proper - OF_CONTROL for U-Boot proper - eMMC - FEC - Boot from eMMC - Boot from USB SDP Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18ARM: i.MX6: dts: Build dtb based on SOC typeJagan Teki1-5/+13
Build dtb's based on SOC type instead building arch type. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-splJagan Teki9-13/+88
u-boot,dm-spl property is specific to U-Boot, so move it into *u-boot.dtsi files for relevant i.MX6UL files. This make syncing Linux dts files straight forward. Also update the MAINTAINERS file for dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-16 04:24:44 +0300