summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2020-03-17mach-davinci: Hard-code the default SPL_LDSCRIPT pathTom Rini1-1/+1
As there is only one linker script to use in this case, rather than use the BOARDDIR variable hard-code the path. Cc: Lokesh Vutla <lokeshvutla@ti.com> Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-17edminiv2: Move CONFIG_SPL_LDSCRIPT to defconfigTom Rini1-3/+0
As there is only one machine under mach-orion5x, having a Kconfig entry for SPL_LDSCRIPT is not helpful, move this to the defconfig file. Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-16Kconfig: Remove redundant variable setsTom Rini2-6/+0
In a few places we have Kconfig entries that set SPL_LDSCRIPT to what is the default value anyways. Drop these. Cc: Michal Simek <monstr@monstr.eu> Cc: Rick Chen <rick@andestech.com> Cc: Philippe Reynes <tremyfr@yahoo.fr> Cc: Eric Jarrige <eric.jarrige@armadeus.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> (for Microblaze) Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-11Merge tag 'mmc-2020-3-9' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini9-11/+108
- DM support for CAxxxx SoCs - eMMC board for presidio-asic - Add defer probe for mmc sdhci - TI SoCs mmc misc update
2020-03-11arm: mediatek: remove unused binman configSam Shih2-1/+1
The binman-option BINMAN_FDT is introduced by this commit: commit 3c10dc95bdd0 ("binman: Add a library to access binman entries") BINMAN_FDT being selected when BINMAN=y that resulting in mt7623 and mt7622 are unable to boot. The root cause of this issue is commit: commit cbd2fba1eca1 ("arm: MediaTek: add basic support for MT7629 boards") select BINMAN=y in all mediatek SoCs, and others mediatek SoCs not expect to use BINMAN_FDT. This patch remove BINMAN=y option when ARCH_MEDIATEK=y and move this to the specify SoCs part config. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de>
2020-03-10arm: dts: imx8mq-evk: add phy-reset-gpios for fec1Alifer Moraes1-0/+2
Instead of resetting the ethernet phy through functions in imx8mq_evk.c, let the driver reset the phy via dts description adding a reset duration of 10 ms following atheros 8031's datasheet recommendation. Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-03-09ARM: dts: imx8mm-verdin: drop rgmii_rxc_dly/txc_dlyMax Krummenacher1-2/+0
The FEC in the i.MX8MM doesn't support this feature. So don't pretend one can use it. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-03-09ARM: dts: imx8mm-verdin: dm-spl for pinctrl_usdhc1 nodeIgor Opaniuk1-0/+4
Let pinctrl configuration for eMMC node (usdhc1) also be accessible in SPL. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-03-09imx8mm/mn: Add missing root clock entry for ARM core clockFrieder Schrempf1-0/+5
The current implementation in arch/arm/mach-imx/cpu.c uses non-DM code to retrieve the core clock frequency. As the root clock is not listed we currently get: CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz Fix this by adding the missing entry, which results in: CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-09imx: Makefile: added missing ahab.oOliver Graute1-0/+1
added missing ahab.o in Makefile Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-09imx: mx6ul_14x14_evk: configure for 24bpp displayAnatolij Gustschin1-1/+1
Before DM_VIDEO conversion this board used 24bpp display configuration, so use it again. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-09ARM: dts: imx6sx-sdb: Sync with kernel 5.4.16Fabio Estevam3-135/+200
Sync the imx6sx-sdb dts files with kernel 5.4.16. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-03-09ARM: dts: imx6sx: Sync with kernel 5.4.16Fabio Estevam2-211/+302
Sync the imx6sx dts files with kernel 5.4.16. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-03-09imx: remove woodburn boardStefano Babic1-10/+0
Board is not longer used, remove it. Signed-off-by: Stefano Babic <sbabic@denx.de>
2020-03-09arm: dts: k3-j721e-r5-common-proc-board: Use unique names for dummy clocksFaiz Abbas1-2/+2
Update the dummy clock names to use unique identifiers. Otherwise the previous node just gets overwitten by the next one with the same name. This fixes eMMC boot not working on J721e-evm. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-03-09arm: K3: sysfw-loader: Add a config_pm_pre_callback()Faiz Abbas4-4/+70
System firmware does not guarantee that clocks going out of the device will be stable during power management configuration. There are some DCRC errors when SPL tries to get the next stage during eMMC boot after sysfw pm configuration. Therefore add a config_pm_pre_callback() to switch off the eMMC clock before power management and restart it after it is done. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-09spl: mmc: Fix spl_mmc_get_uboot_raw_sector() implementationFaiz Abbas1-1/+2
The call to spl_mmc_get_uboot_raw_sector() completely ignores and overwrites the raw_sect value passed from the caller of spl_mmc_load(). Fix this by passing raw_sect to the function and returning the same value in the default case. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-09mmc: am654_sdhci: Update output tap delay writesFaiz Abbas3-4/+34
With the latest RIOT, there is a different otap delay value for each speed mode. Add a new binding with every supported speed mode. Also disable a given speed mode in the host caps if its corresponding otap-del-sel is not present. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-05x86: apl: Use cpu_x86_get_count() for cpu_ops.get_countWolfgang Wallner1-6/+1
Use cpu_x86_get_count() to read the number of cores. cpu_x86_get_count() reads the number of CPUs from the device tree. Using this function we can support multiple Apollo Lake variants, e.g.: E3940 (4 cores) and E3930 (2 cores). This was tested on the E3940 and E3930 Apollo Lake variants. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05x86: cpu_x86: Make cpu_x86_get_count() non-staticWolfgang Wallner2-1/+13
The function cpu_x86_get_count() is also useful for other modules. Make it non-static and add a prototype + description. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05x86: p2sb: Drop 'apl' prefixWolfgang Wallner2-16/+16
Drop the Apollo Lake prefix 'apl' from the functions, types and variables in the P2SB driver. The P2SB is not Apollo Lake specific, and as such it was moved in commit 2999846c1127 ("x86: Move P2SB from Apollo Lake to a more generic location") from the Apollo Lake folder to the intel_common folder. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05Revert "x86: use invd instead of wbinvd in real mode start code"Andy Shevchenko2-2/+2
This reverts commit 0d67fac29f3187e67f4fd3ef15f73e91be2fad12. As real hardware testing (*) shows the above mentioned commit breaks U-Boot on it. Revert for the upcoming release. We may get more information in the future and optimize the code accordingly. (*) on Intel Edison board. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fix a typo in the commit message] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-05x86: Correct error return value in mrccache_get_region()Simon Glass1-0/+2
This function doesn't use uclass_find_first_device() correctly. Add a check that the device is found so we don't try to read properties from a NULL device. The fixes booting on minnoxmax. Fixes: 87f1084a630 ("x86: Adjust mrccache_get_region() to use livetree") Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-04Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini3-0/+141
- ABB SECU board - Assorted minor fixes
2020-03-04ARM: socfpga: Add initial support for the ABB SECU boardHolger Brunck3-0/+141
Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-29Merge tag 'uniphier-v2020.04-3' of ↵Tom Rini21-95/+169
https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier UniPhier SoC updates for v2020.04 (3rd) - Enable ADMA and HS400 for the eMMC driver on 64-bit SoCs - Add some convenient environment variables to handle SD card - Sanitize the NAND controller reset sequence and its WP handling - Sync DT with Linux
2020-02-29ARM: dts: uniphier: remove U-Boot own EEPROM compatible and propertyMasahiro Yamada5-9/+5
The compatible string "i2c-eeprom" is U-Boot own compatible, which has never been approved by the DT community. "u-boot,i2c-offset-len" is also a U-Boot own hack. Linux adds "atmel,*" as generic compatibles, and U-Boot also followed it by commit d7e28918aa3f ("i2c_eeprom: Add reading support"). The U-Boot own hack is no longer needed. Just sync with Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-29ARM: dts: uniphier: add reset-names to NAND controller nodeMasahiro Yamada8-8/+16
Import Linux commits: 37f3e0096f71 ("ARM: dts: uniphier: add reset-names to NAND controller node") e98d5023fe1f ("arm64: dts: uniphier: add reset-names to NAND controller node") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-29ARM: dts: uniphier: rename DT nodes to follow json-schemaMasahiro Yamada8-38/+38
Import the nodename changes I made in Linux for avoiding dt-schama warnings. This follows the $nodename patterns in the dt-schema. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28watchdog: mpc8xx: Revert the 8xx watchdog back to CONFIG_HW_WATCHDOGChristophe Leroy1-4/+0
Commit f3729ba6e7b2 ("watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup") switched the watchdog to CONFIG_WATCHDOG. But this is not compatible with the 8xx because it starts the watchdog HW timer at reset and must be serviced from the very beginning including while U-boot is executed in the firmware before relocation in RAM. Select CONFIG_HW_WATCHDOG and make hw_watchdog_reset() visible. Meanwhile, finalise the cleanup of arch/powerpc/cpu/mpc8xx/Kconfig by removing the lines put in comment in that commit, and also remove again the selection of CONFIG_MPC8xx_WATCHDOG which was removed by that commit and brought back by mistake by commit b3134ffbd944 ("watchdog: Kconfig: Sort entry alphabetically") Note that there was an 'imply WATCHDOG' in the original commit but it disappeared in the Kconfig alphabetical sorting, so no need to remove it here. Fixes: f3729ba6e7b2 ("watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup") Fixes: b3134ffbd944 ("watchdog: Kconfig: Sort entry alphabetically") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Stefan Roese <sr@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-02-27ARM: uniphier: detect the base of micro support card at run-timeMasahiro Yamada1-12/+31
The base address 0x43f00000 is no longer true for the future SoC. Extract the base address from the device tree. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-27ARM: uniphier: remove workaround for the NAND write protectMasahiro Yamada1-17/+0
This workaround was previously needed for LD4, Pro4, sLD8, Pro5 SoCs. The boot ROM does not touch this register for PXs2/LD6b or later. Now that the reset signal of the Denali NAND controller is always asserted in board_init() then deasserted in the driver, the WRITE_PROTECT register gets back to the default value, which means the write protect is deasserted. This workaround can go away entirely. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-27ARM: uniphier: move NAND reset assertion to U-Boot proper from SPLMasahiro Yamada5-7/+56
The comment /* deassert reset */ is wrong. It asserts the reset. It no longer needs to stay in SPL. The NAND controller reset is handled in the driver. So, this assert can be moved to the board_init() of U-Boot proper. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-27ARM: uniphier: add sdscript, sdboot, sdupdate environment variablesMasahiro Yamada1-4/+23
Add handy macros: - sdscript: source boot.scr in the file system of the SD media - sdboot : boot the kernel using the images in the file system of the SD media - sdscript: update the boot firmware in the SD media (in raw block sectors) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-26Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini2-12/+7
- Update Sata node for T2080QDS and revert SATA related unrequired patches.
2020-02-25arch: arm: Fix SZ_64K undeclared compilation errorWasim Khan1-0/+1
Macro SZ_64K is undeclared. Include sizes.h to fix the compilation error. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-02-25arch: powerpc: Rewrite the sata node to fit the driverPeng Ma1-11/+4
The sata of our powerpc platforms are updated. These changes is to fit the driver probe. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-25Revert "powerpc: mpc85xx: delete FSL_SATA for T2080QDS board."Peng Ma1-1/+3
This reverts commit 856b9cdb53f0e6c8d98f81cf71ef363c16b0aa0e. Commit 856b9cdb53f0 ("powerpc: mpc85xx: delete FSL_SATA for T2080QDS board.") is to fit support sata DM mode, Now the driver will be reverted, So revert it. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-21Merge tag 'u-boot-rockchip-20200220' of ↵Tom Rini19-149/+350
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - rk3399: split roc-pc-rk3399 out of evb_rk3399 - sync dts from upstream kernel for rk3399,rk3288,px30 - boot_mode: find the saradc device name
2020-02-20dma-mapping: add <asm/dma-mapping.h> for all architecturesMasahiro Yamada8-0/+8
To avoid "asm/dma-mapping.h: No such file or directory" error, we need something. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-20arch: arm: rockchip: order the rk3399 entries alphabeticallyPeter Robinson1-12/+12
Put the target entries for rk3399 devices in alphabetical order. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h>Masahiro Yamada4-102/+0
The implementation of dma_map_single() and dma_unmap_single() is exactly the same for all the architectures that support them. Factor them out to <linux/dma-mapping.h>, and make all drivers to include <linux/dma-mapping.h> instead of <asm/dma-mapping.h>. If we need to differentiate them for some architectures, we can move the generic definitions to <asm-generic/dma-mapping.h>. Add some comments to the helpers. The concept is quite similar to the DMA-API of Linux kernel. Drivers are agnostic about what is going on behind the scene. Just call dma_map_single() before the DMA, and dma_unmap_single() after it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19dma-mapping: fix the prototype of dma_unmap_single()Masahiro Yamada4-12/+4
dma_unmap_single() takes the dma address, not virtual address. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19dma-mapping: fix the prototype of dma_map_single()Masahiro Yamada4-8/+12
Make dma_map_single() return the dma address, and remove the pointless volatile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19board: roc-pc-rk3399: Add support for onboard LED's and push button to ↵Suniel Mahesh1-0/+7
indicate power mode Added support for onboard LED's and push button. When powered board will be in low power mode(yellow LED), on button press, board enters full power mode (red LED) and boots u-boot. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rockchip: rk3399: split roc-pc-rk3399 out of evb_rk3399Suniel Mahesh1-0/+20
roc-pc-rk3399 board has one user button & three user LED's. Currently we don't have any code support for these devices. Since button and LED's are specific to roc-pc-rk3399 board, split it into its own board file and add code support here. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rockchip: boot_mode: find the saradc device nameHugh Cole-Baker1-1/+21
adc_channel_single_shot() requires the full device name e.g. "saradc@ff100000", which differs between Rockchip SoC's, but they all share the prefix "saradc"; find the ADC device with this name prefix and use its full name. Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19ARM: dts: rockchip: Sync rk3288-vyasa dts from linuxJagan Teki1-47/+32
Sync rk3288-vyasa dts file from Linux. This sync has changes required to work HDMI output on Vyasa RK3288 board. This sync excludes the io_domains node since it is not available in rk3288.dtsi. Changes like vcc50_hdmi, vdd10_lcd and ddc-i2c-bus are not merged to Linux yet but wil resync later if any further updates on this. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rockchip: rk3288: Enable pre console bufferJagan Teki1-0/+1
Enable pre console buffer for rk3288 platform. This would help to capture the console messages prior to the console being initialised. Enabling this would help to capture all the console messages on video output source like HDMI. So we can find the full console messages of U-Boot proper on HDMI display when enabled it for RK3288 platform boards. Buffer address used for pre console is 0x0f000000 which is ram base plus 240MiB. right now the Allwinner SoC is using similar computation. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rockchip: px30: sync the main px30 dtsi from mainlineHeiko Stuebner1-11/+171
There have been multiple peripherals added to the main px30 dtsi in the Linux kernel since its addition to u-boot. So to make it easier to sync board devicetrees, update the core dtsi from Linux. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-11 13:52:09 +0300