summaryrefslogtreecommitdiff
path: root/board/AndesTech/ax25-ae350
AgeCommit message (Collapse)AuthorFilesLines
2022-06-06ax25-ae350: Move CONFIG_SYS_FDT_BASE to KconfigTom Rini1-0/+4
The address where the device tree will be passed in to U-Boot at is now moved to the Kconfig file. If this is user configurable, it needs to be exposed rather than hidden, and should probably be renamed as well. Reviewed-by: Rick Chen <rick@andestech.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-26riscv: ae350: Fix OF_BOARD boot failureRick Chen1-0/+1
Enable OF_HAS_PRIOR_STAGE for ae350 boards with OF_BOARD Fixes: 239d22c79520 ("fdt: Enable OF_HAS_PRIOR_STAGE for most boards with OF_BOARD") Signed-off-by: Rick Chen <rick@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-11-08riscv: ae350: Use #if defined instead of CONFIG_IS_ENABLEDLeo Yu-Chi Liang1-2/+2
According to ./include/linux/kconfig.h, CONFIG_IS_ENABLED(OF_BOARD) expands to 0 when CONFIG_SPL_BUILD is defined because there is no CONFIG_SPL_OF_BOARD. Use #if defined instead. Fixes: 2e8d2f88439d ("riscv: Remove OF_PRIOR_STAGE from RISC-V boards") Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-10-27sandbox: Remove OF_HOSTFILEIlias Apalodimas1-1/+3
OF_HOSTFILE is used on sandbox configs only. Although it's pretty unique and not causing any confusions, we are better of having simpler config options for the DTB. So let's replace that with the existing OF_BOARD. U-Boot would then have only three config options for the DTB origin. - OF_SEPARATE, build separately from U-Boot - OF_BOARD, board specific way of providing the DTB - OF_EMBED embedded in the u-boot binary(should not be used in production Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-18riscv: Remove OF_PRIOR_STAGE from RISC-V boardsIlias Apalodimas1-1/+6
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got introduced, in order to support a DTB handed over by an earlier stage boo loader. However we have another option in the Kconfig (OF_BOARD) which has identical semantics. On RISC-V some of the boards pick up the DTB from a1 and copy it in their private gd_t. Apart from that they copy it to prior_stage_fdt_address, if the Kconfig option is selected, which is unnecessary. So let's switch the config option for those boards to OF_BOARD and define the required board_fdt_blob_setup() for them. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-09-04mmc: Rename MMC_SUPPORT to MMCSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: Fixup some incorrect renames] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-19riscv: ae350: Switch to use binman to generate u-boot.itbBin Meng1-0/+1
Use the new BINMAN_STANDALONE_FDT option for AE350 based SPL defconfigs, so that binman is now used to generate u-boot.itb. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com>
2021-02-15Merge branch '2021-02-02-drop-asm_global_data-when-unused'Tom Rini1-0/+1
- Merge the patch to take <asm/global_data.h> out of <common.h>
2021-02-03riscv: ax25-ae350: Cast addr with uintptr_tBin Meng1-1/+1
addr was delcared as fdt_addr_t which is now a 64-bit address. In a 32-bit build, this causes the following warning seen when building ax25-ae350.c: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Cast addr with uintptr_t. Signed-off-by: Bin Meng <bin.meng@windriver.com>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass1-0/+1
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24riscv: ae350: Use fdtdec_get_addr_size_auto_noparent to parse smc regRick Chen1-1/+2
Use fdtdec_get_addr_size_auto_noparent to read the "reg" property instead of fdtdec_get_addr. This will increase the compatibility of dtb parsing. Signed-off-by: Rick Chen <rick@andestech.com> Acked-by: Leo Liang <ycliang@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Leo Liang <ycliang@andestech.com>
2020-07-17treewide: convert bd_t to struct bd_info by coccinelleMasahiro Yamada1-1/+1
The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-19common: Drop image.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop net.h from common headerSimon Glass1-0/+1
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop flash.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Fix up some style problems in flash.h while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move RAM-sizing functions to init.hSimon Glass1-0/+1
These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-10riscv: ax25-ae350: Use generic memory size setupRick Chen1-19/+2
To get memory size from device tree instead of get_ram_size(). This can avoid memory access fault in U-Boot proper after PMP configurations in OpenSBI. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
2019-12-10riscv: ax25-ae350: add SPL configurationRick Chen3-0/+40
This patch provides four configurations which can support U-Boot SPL to boot from RAM or FLASH and then boot FIT image including OpenSBI FW_DYNAMIC firmware and U-Boot proper images from RAM or MMC boot devices. With ae350_rv[32|64]_spl_defconfigs: U-Boot SPL will be loaded by gdb or FSBL and runs in RAM in machine mode and then load FIT image from RAM device on AE350. With ae350_rv[32|64]_spl_xip_defconfigs: U-Boot SPL can be burned into SPI flash and run in flash in machine mode and then load FIT image from SPI flash or MMC device on AE350. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
2019-09-03riscv: ae350: use the v5l2 driver to configure the cacheRick Chen1-0/+9
Find the UCLASS_CACHE driver to configure the cache controller's settings. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-09riscv: configs: AE350 will use CONFIG_OF_SEPARATE when boots from flashRick Chen1-4/+0
When AE350 boots from flash, use CONFIG_OF_SEPARATE instead of CONFIG_OF_BOARD. Also remove unused code about prior_stage_fdt_address. And modify CONFIG_SYS_FDT_BASE as flash address. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-05-09riscv: configs: Support AE350 SMP booting from flash flowRick Chen1-0/+2
Add two defconfigs to support AE350 SMP booting from flash. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-04-08riscv: ae350: enable SMPRick Chen1-0/+1
Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2018-12-18riscv: configs: Rename ax25-ae350 defconfigRick Chen1-3/+2
Remove cpu name from the defconfig naming. Because other cpus maybe run on AE350 platform. So only use platfrom name in defconfig naming will be better. Also sync MAINTAINERS: Rename a25-ae350_32_defconfig as ae350_rv32_defconfig ax25-ae350_64_defconfig as ae350_rv64_defconfig Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-12-18riscv: ax25: Hide the ax25-specific Kconfig optionBin Meng1-0/+4
There is no need to expose RISCV_NDS to the Kconfig menu as it is an ax25-specific option. Introduce a dedicated Kconfig option for the cache ops of ax25 platform and use that to guard the cache ops. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Rick Chen <rick@andestech.com>
2018-12-05riscv: ax25-ae350: Pass dtb address to u-boot with a1 registerRick Chen1-1/+2
ax25-ae350 use CONFIG_OF_BOARD via a2 and CONFIG_SYS_SDRAM_BASE to boot from ram which allow the board to override the fdt address originally. But after this patch riscv: save hart ID and device tree passed by prior boot stage It provide prior_stage_fdt_address which offer a temporary memory address to keep the dtb address passing from loader(gdb) to u-boot with a1. So passing via a2 and CONFIG_SYS_SDRAM_BASE is redundant and can be removed. And it also somehow may corrupted BBL if it was be arranged in CONFIG_SYS_SDRAM_BASE. In board_fdt_blob_setup() When boting from ram: prior_stage_fdt_address will be use to reserved dtb temporarily. When booting from ROM: dtb will be pre-burned in CONFIG_SYS_FDT_BASE, if it is flash base. Or CONFIG_SYS_FDT_BASE maybe a memory map space (NOT RAM or ROM) which is provided by HW. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
2018-11-26Merge git://git.denx.de/u-boot-riscvTom Rini1-0/+2
2018-10-03riscv: Remove mach typeBin Meng1-2/+0
Since the mach_id is not used by RISC-V, remove it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2018-05-29board: ax25-ae350: Support cfi flashRick Chen1-0/+34
Add smc_init() to get register base from dts and deal with atfsmc020 controler initialzation job. Write protect is enabled by default. So WP shall be disabled when startup, then cfi flash can be detected and erasing and writing can be executed. Adp-ae3xx and adp-ag101p both do smc initilize job in lowlevel_init.S and get register base fron CONFIG_FTSMC020_BASE. They also can be moved those codes to board stage. Remind them as todo jobs. After that CONFIG_FTSMC020_BASE can be removed. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
2018-05-29board: nx25-ae250: Rename as ax25-ae350Rick Chen4-0/+110
Rename nx25 as ax25 ae250 as ae350 nx25-ae250 as ax25-ae350 including filename, variable, string and definition. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-11 08:27:08 +0300