summaryrefslogtreecommitdiff
path: root/board/engicam
AgeCommit message (Collapse)AuthorFilesLines
2021-09-01imx: Finish migration of IMX_CONFIG to KconfigTom Rini1-0/+3
- Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-28Rename SPL_POWER_SUPPORT to SPL_POWERSimon Glass1-1/+1
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-05-02board: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0Jagan Teki1-0/+6
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier board. Genaral features: - Ethernet 10/100 - Wifi/BT - USB Type A/OTG - Audio Out - CAN - LVDS panel connector i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Carrier board for creating complete i.Core MX8M Mini C.TOUCH 2.0 board. Linux dts commit details: commit <a142252061ff> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter KitJagan Teki6-0/+2065
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board. Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Mini PCIe - MIPI CSI - 2x CAN - Audio Out i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Evaluation board for creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit. Linux dts commit details: commit <051c08eea682> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OFJagan Teki1-0/+6
7" OF is a capacitive touch 7" Open Frame panel solutions with - 7" AUO B101AW03 LVDS panel - EDT, FT5526 Touch MicroGEA STM32MP1 is a STM32MP157A based Micro SoM. MicroDev 2.0 is a general purpose miniature carrier board with CAN, LTE and LVDS panel interfaces. MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0 7" Open Frame Solution board. Linux dts commit details: commit <1d278204cbaa> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 boardJagan Teki2-1/+8
MicroDev 2.0 is a general purpose miniature carrier board with CAN, LTE and LVDS panel interfaces. Genaral features: - Ethernet 10/100 - USB Type A - Audio Out - microSD - LVDS panel connector - Wifi/BT (option) - UMTS LTE with sim connector (option) MicroGEA STM32MP1 is a STM32MP157A based Micro SoM. MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board. Linux dts commit details: commit <f838dae7afd0> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0Jagan Teki1-0/+6
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier board. Genaral features: - Ethernet 10/100 - Wifi/BT - USB Type A/OTG - Audio Out - CAN - LVDS panel connector i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. i.Core STM32MP1 needs to mount on top of this Carrier board for creating complete i.Core STM32MP1 C.TOUCH 2.0 board. Linux dts commit details: commit <6ca2898df59f> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter KitJagan Teki5-0/+202
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board. Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Mini PCIe - MIPI CSI - 2x CAN - Audio Out i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. i.Core STM32MP1 needs to mount on top of this Evaluation board for creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit. Linux dts commit details: commit <adc0496104b6> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass1-0/+1
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-30rockchip: Add Engicam PX30.Core C.TOUCH 2.0Jagan Teki1-0/+6
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. C.TOUCH 2.0 is a general purpose carrier board with capacitive touch interface support. PX30.Core needs to mount on top of this Carrier board for creating complete PX30.Core C.TOUCH 2.0 board. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30rockchip: Add Engicam PX30.Core EDIMM2.2 Starter KitJagan Teki4-0/+34
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board from Engicam. PX30.Core needs to mount on top of this Evaluation board for creating complete PX30.Core EDIMM2.2 Starter Kit. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30board: engicam: Attach i.MX6 common codeJagan Teki4-2/+17
The existing common code for Engicam boards uses i.MX6, so attach that into i.MX6 Engicam boards so-that adding new SoC variants of Engicam boards become meaningful. Add support for it. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-05-19common: Drop linux/delay.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop log.h from common headerSimon Glass1-0/+1
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop init.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop image.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-18common: Move hang() to the same header as panic()Simon Glass1-0/+1
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-07board: engicam: Fix the ethernet clock initializationMichael Trimarchi1-0/+29
According to the SOM and reference board the clock can be taken from the external pin or provided from ENET_REF_CLK. Add a new function that make the proper set according the board type. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-07board: engicam: Cleanup fdt file and board mappingMichael Trimarchi1-11/+56
Make easy to map fdt file to board in order to use this information later to apply specific change to specific board combination. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-12-03common: Move some board functions out of common.hSimon Glass1-0/+1
A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-03common: Move command functions out of common.hSimon Glass1-0/+1
Move these functions into the command.h header file which is a better fit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-03common: Move serial functions out of common.hSimon Glass1-0/+1
These functions belong in serial.h so move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-08-11env: Move env_set_ulong() to env.hSimon Glass1-0/+1
Move env_set_ulong() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-19board: engicam: Remove bogus check for mmc for imx6ul isiotShyam Saini1-2/+0
imx6ul-isiot-mmc.dts was removed in uboot version v2018.03 and from then onwards IMX6UL isiot uses imx6ul-isiot-emmc.dts for mmc, so remove unnecessary check for mmc. Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-03-13board: engicam: Add watchdog support on EngicamShyam Saini1-0/+5
This patch adds watchdog support for engicam imx6 family of boards. Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2018-07-23i.MX6: engicam: gpr_init can be called only for some architectureMichael Trimarchi1-1/+2
Fix an invalid usage of the gpr_init function for the imx6ul architecture Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2018-06-27imx6ul: geam: Fix fdt_file mismatchJagan Teki1-2/+2
fdt_file is looking for imx6ul-geam-kit.dtb but Linux has imx6ul-geam.dtb, since Linux skipped -kit on file name by below commit. "ARM: dts: imx6ul-geam: Skip suffix -kit from dts name" (sha1: 182de5ebce71e469cfa686fcdf08c9cbe11ece97) So, due to this mismatch U-Boot failed to pick the proper dtb which eventually break the Linux boot. This patch fixed this mismatch by - renaming dts files - update config option to use new dtb file - update fdt_file to new dtb file name Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-18board: engicam: spl: match icore-mipi fit-configJagan Teki1-0/+4
Match imx6q-icore-mipi and imx6dl-icore-mipi dtb in board_fit_config_name_match. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-splJagan Teki1-0/+5
u-boot,dm-spl property is specific to U-Boot, so move it into *u-boot.dtsi files for relevant i.MX6UL files. This make syncing Linux dts files straight forward. Also update the MAINTAINERS file for dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-splJagan Teki1-1/+10
u-boot,dm-spl property is specific to U-Boot, so move it into *u-boot.dtsi files for relevant i.MX6QDL files. This make syncing Linux dts files straight forward. Also update the MAINTAINERS file for dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini8-19/+8
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRTom Rini3-6/+0
We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-22imx6q: engicam: Use SPL_LOAD_FIT for MMC boardsJagan Teki1-1/+3
Currently SPL_LOAD_FIT is unable to boot from nand on i.MX6QDL platform, so enable only for MMC boards. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-02-22imx6ul: engicam: Drop isiot-mmc defconfigJagan Teki1-1/+0
Engicam Is.IoT has eMMC and NAND cpu modules where MMC is common for both, so remove explicit mmc defconfig. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-02-18mx6: fix MAINTAINERS for Engicam i.CoreM6 1.5 MIPIStefano Babic1-0/+4
Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Jagan Teki <jagan@amarulasolutions.com>
2018-02-04board: i.MX6QDL: add Engicam i.CoreM6 1.5 QDL MIPI starter kitJagan Teki1-2/+7
i.CoreM6 1.5 is an another i.CoreM6 QDL cpu modules which can be connected to EDIMM starter kit design with eMMC and MIPI-CSI interfaces suitable for Android and video capture application. notable features: CPU NXP i.MX6 S/DL/D/Q, Up to 4 x Cortex-A9@800MHz Memory Up to 2 GB DDR3-1066 Video Interfaces Up to 1 Parallel Up to 2 LVDS HDMI 1.4 port 8 bit CSI INPUT MIPI-CSI INPUT 1 x 10/100 Ethernet interface, 2 x USB, 1 x PCIe, 1 x I2S etc This patch adds support for Quad/Dual and DualLite/Solo SOM's on MIPI starter kit with boot from SD and eMMC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-01-08board: engicam: Fix to remove legacy board/icorem6_rqsJagan Teki1-48/+0
board/icorem6_rqs/ is forgot to remove while moving common board files together in (sha1: 52aaddd6f415397bb2eae0d68a8cc1c5c4a98bb3) "i..MX6: engicam: Add imx6q/imx6ul boards for existing boards" Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-01-03imx: spl: Fix NAND bootmode detectionEran Matityahu1-1/+1
commit 20f14714169 ("imx: spl: Update NAND bootmode detection bit") broke the NAND bootmode detection by checking if BOOT_CFG1[7:4] == 0x8 for NAND boot mode. This commit essentially reverts it, while using the IMX6_BMODE_* macros that were introduced since. Tables 8-7 & 8-10 from IMX6DQRM say the NAND boot mode selection is done when BOOT_CFG1[7] is 1, but BOOT_CFG1[6:4] is not necessarily 0x0 in this case. Actually, NAND boot mode is when 0x8 <= BOOT_CFG1[7:4] <= 0xf, like it was in the code before. Signed-off-by: Eran Matityahu <eran.m@variscite.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Jagan Teki <jagan@openedev.com> Cc: Tim Harvey <tharvey@gateworks.com>
2017-11-27engicam: imx6q: Return mmc dev 0 for icoreJagan Teki1-1/+2
icorem6 has sd on usdhci1 which is devno 0 so return proper devno from board_mmc_get_env_dev for icorem6 and icorem_6rqs Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-11-27i.MX6: engicam: Add imx6q/imx6ul boards for existing boardsJagan Teki21-259/+75
Add new board names for existing board support imx6q - icore and icore_rqs boards imx6ul - geam6ul and isiot boards Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-11-27board: icore-rqs: Fix mmc get env deviceJagan Teki1-1/+1
As per USDHC boot eFUSE descriptions: USDHC3 => devno 2 USDHC4 => devno 3 Linux will detect mmc0, mmc1, mmc2 based on the status "okay" on usdhc so imx6qdl-icore-rqs.dtsi has enabled usdhc1, usdhc3 and usdhc4.But U-Boot can detect based on the aliases so add mmc1, mmc2 for usdhc3 and usdhc4 respectively and return the board_mmc_get_env_dev by subtracting -1 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-11-27i.MX6UL: icore: Add SPL_OF_CONTROL supportJagan Teki2-182/+0
Add OF_CONTROL support for SPL code. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-11-27i.MX6Q: icore: Add SPL_OF_CONTROL supportJagan Teki2-177/+0
Add OF_CONTROL support for SPL code. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-11-27i.MX6Q: icorem6: Move spl load fit to common/splJagan Teki3-24/+16
Move spl load fit code into common/spl Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-11-27i.MX6: engicam: Move set_fdt_file to commonJagan Teki6-34/+24
setenv_fdt_file to common code and set dtb based on CONFIG_DEFAULT_DEVICE_TREE and cpu_type. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-11-07i.MX6: engicam: Fix MAINTAINERS/READMEJagan Teki6-14/+8
- Update newly added include/configs file in MAINTAINERS - Update newly added defconfig file in README Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-10-12icorem6_rqs: env: Return mmc devnoJagan Teki1-2/+1
Instead of changing mmc devno from dts nodes better to return the detected devno so-that env trigger the same. Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-09-18imx6: drop duplicated bss memset and board_init_r() callAnatolij Gustschin1-6/+0
bss section is cleared in crt0.S. board_init_r() is also entered from crt0 code. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <lukma@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-08-30i.MX6Q: icorem6: Add falcon modeJagan Teki1-0/+11
Add Falcon mode support in Engicam i.CoreM6 board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-08-28imx: imx6: Move gpr_init() function to soc.cBreno Lima1-11/+0
Since the gpr_init() function is common for boards using MX6S, MX6DL, MX6D, MX6Q and MX6QP processors move it to the soc.c file. Signed-off-by: Breno Lima <breno.lima@nxp.com> Acked-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-06 04:10:45 +0300