summaryrefslogtreecommitdiff
path: root/board/keymile
AgeCommit message (Collapse)AuthorFilesLines
2022-04-01Convert CONFIG_KM_COGE5UN et al to KconfigTom Rini1-0/+23
This converts the following to Kconfig: CONFIG_KM_COGE5UN CONFIG_KM_KIRKWOOD_128M16 CONFIG_KM_KIRKWOOD CONFIG_KM_KIRKWOOD_PCI CONFIG_KM_NUSA CONFIG_KM_SUSE2 Cc: Holger Brunck <holger.brunck@hitachienergy.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-04-01kmtegr1: Drop CONFIG_KMTEGR1Tom Rini1-1/+1
The only usage of CONFIG_KMTEGR1 can be replaced by CONFIG_TARGET_KMTEGR1 so do so and remove this other symbol. Cc: Holger Brunck <holger.brunck@hitachienergy.com> Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-03-10event: Convert misc_init_f() to use eventsSimon Glass2-2/+7
This hook can be implmented using events, for the three boards that actually use it. Add the event type and event handlers. Drop CONFIG_MISC_INIT_F since we can just use CONFIG_EVENT to control this. Since sandbox always enables CONFIG_EVENT, we can drop the defconfig lines there too. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-02-01km/ls102xa: use unused scratchrw4 address for post wordAleksandar Gerasimovski1-6/+5
The SCRATCHRW4 is only used in secure boot scenario that is unsupported by our design, so this address can be stolen for storing POST status. The SCRATCHRW4 is initialized to zero at core rest. Using a DDR address was unfortunate choice, the DDR at boot time has a random contend and it happens that sometimes is matching POST magic number. This behavior can lead to undefined POST behavior and u-boot ending in failbootcmd command. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01configs/expu1: add u-boot update defconfigAleksandar Gerasimovski1-0/+1
This patch adds default defconfig for u-boot update version, the u-boot update defconfig is a copy of the default (factory) defconfig with: - adapted text base and environment addresses - explicit flag that this is a field updated u-boot version At the time of implementation this version is only used to verify the update procedure, in future depend on the needs this defconfig can be extended with additional options. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01km/ls102xa: fix device disable configurationAleksandar Gerasimovski1-2/+1
This was probably broken when mainlining, CONFIG_FSL_DEVICE_DISABLE is not Kconfig but whitelisted. It's fine to be without flag as this is always enabled for abec1020 (pg-wcom-ls102xa.h) Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01configs/seli8: add u-boot update defconfigAleksandar Gerasimovski1-0/+1
This patch adds default defconfig for u-boot update version, the u-boot update defconfig is a copy of the default (factory) defconfig with: - adapted text base and environment addresses - explicit flag that this is a field updated u-boot version At the time of implementation this version is only used to verify the update procedure, in future depend on the needs this defconfig can be extended with additional options. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01km/ls102xa: add support for field fail-safe u-boot updateAleksandar Gerasimovski1-0/+7
Field fail-safe u-boot update procedure for pg-wcom boards is defined and implemented by patch: 59b3403. This patch invokes the update procedure for pg-wcom-ls102x designs during early misc_init_f execution. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01km: common: implement field fail-safe u-boot updateAleksandar Gerasimovski4-0/+104
This patch provides possibility for field fail-safe u-boot updates. The implementation can be used on all pg-wcom boards that are booting from parallel NOR flash. When used in a board design, provided check_for_uboot_update function will start new u-boot at defined location if updateduboot envvar is set to yes. With this implementation it is expected that factory programmed u-boot will always stay as it is, and optionally new u-boot can be safely programmed by embedded software when the unit is rolled out on the field. It is expected check_for_uboot_update to be called early in execution before relocation (*_f) once SoC is basically initialized and environment can be read, with this possibilities to not be able to fix a u-boot bug by a u-boot update are reduced to minimum. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01km: qrio: add access functions for ebootcountAleksandar Gerasimovski2-0/+41
The EBOOTCNT is a reserved persistent static memory area in QRIO, and similar to BOOTCNT is intended to be used as boot counter location. Comparable to BOOTCNT that is reserved for u-boot main bootcount infrastructure, EBOOTCNT is intended to be used for pg-wcom board specific purposes (e.g implementing early boot counter for fail-safe u-boot update). Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01km/ls102xa: dbg phy prst depends on piggy presenceAleksandar Gerasimovski1-1/+3
The PHY for the debug interface was placed on the board for the pg_wcom_ls102x. Hence only when a piggy is plugged, a RJ45 jack including magnetics is connected to the MDI of the PHY. Without a piggy the MDI lines are left floating and it does not make sense to have an active debug PHY. In case of expu1 an active PHY without a piggy even led to increased jitter for syncE. This patch only deactivates the prst line of the debug PHY when a piggy is detected persent. Signed-off-by: Rainer Boschung <rainer.boschung@hitachienergy.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01km: qrio: add function to read PGY_PRES pin statusAleksandar Gerasimovski2-0/+14
It is necessary to read the status of the PGY_PRES pin so that u-boot can react accordingly. Signed-off-by: Rainer Boschung <rainer.boschung@hitachienergy.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01km/ls102xa: use qrio selftest_pin for reading selftestAleksandar Gerasimovski1-3/+2
QRIO library now supports direct read of the test pin status. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01km: qrio: add function to read SLFTEST pin statusAleksandar Gerasimovski2-0/+14
There is a request from HW designers to use this QRIO pin for detecting DIC26_SELFTEST status instead of a GPIO pin. This pin is typically used during production for executing POST tests and starting test ESW bank. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-12-28CONFIG_SYS_CLK_FREQ: Consistently be static or get_board_sys_clk()Tom Rini1-5/+0
This CONFIG option is used in one of two ways. The first way is that it is defined to a static value, of an unsigned long size. The second way is that it is defined to something, typically a function, to determine this value at run time. However, in a few cases that function returns a static value. Change that to using the static value directly. In the case of using something at run time, convert everything to using a function of the same name and prototype. This will allow for further cleanups. Finally, we have a few cases where the function is just not used, so drop it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-15board/km: update MAINTAINERS filesHolger Brunck4-6/+5
Update the e-mail addresses and person responsible. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com> CC: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> CC: Rainer Boschung <rainer.boschung@hitachienergy.com>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk1-1/+0
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-01Kconfig: Remove all default n/no optionsMichal Simek1-6/+0
default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30i2c: fsl_i2c: Migrate to KconfigTom Rini1-2/+2
- As there are no boards that use different values for speed / slave on different buses, use a single option. - Switch to using the common SYS_I2C_SPEED / SYS_I2C_SLAVE options. - Introduce _HAS_ options for additional buses as only the first one is common to all users. - Convert all remaining symbols to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30keymile: Use CONFIG_SYS_IVM_EEPROM_ADRTom Rini1-3/+3
As the code reads now, making this code path use CONFIG_SYS_IVM_EEPROM_ADR rather than CONFIG_SYS_I2C_EEPROM_ADDR seems to make sense as the rest of the EEPROM infrastructure isn't used on these platforms. Cc: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
2021-08-02global: Convert simple_strtoul() with hex to hextoul()Simon Glass1-2/+2
It is a pain to have to specify the value 16 in each call. Add a new hextoul() function and update the code to use it. Add a proper comment to simple_strtoul() while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-08ppc: Remove kmcoge4 boardTom Rini13-809/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. Cc: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-17pg-wcom-ls102x: initialize front led and app bufAleksandar Gerasimovski1-0/+6
This patch adds the front led initialization and the application buffer enable to the eraly board inititlaization. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17km/scripts: fix saveenv command syntaxAleksandar Gerasimovski1-1/+1
This is most probably a typo, and in older u-uboot versions is same as 'saveenv', in the newer uboot versions there is a separate 'save' command that is different from 'saveenv'. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17km/ls102xa: add support for u-boot POST memory testAleksandar Gerasimovski1-0/+34
From production view this is standard test executed during production on all linux based foxmc cards. On CENT2 HW defined memory region is zero means that some DDR accesses are done by memory_post_dataline and memory_post_addrline but pattern tests are skipped that's why mem_regions is fast there. On ls102x for the complete DDR region of 1GiB memory_regions_post_test takes approx. 4min and this is too much for production, so this patch defines only 1MiB region as compromise. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17board/km: add support for expu1 design based on nxpAleksandar Gerasimovski4-8/+51
The EXPU1 design is a new 40G capable ethernet service unit card for Hitachi-Powergrids wired-com product lines. The base SoC is same as for already added SELI8 card, consequently the already added u-boot support for SELI8 is reused. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> [Fixed new line error at EOF] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17keymile: common: fix hexadecimal env variable formatAleksandar Gerasimovski1-3/+8
Commit df86d32 breaks linux kernel and product application boot. Linux kernel and our product application scripts are expecting 0x prefix for hexadecimal values, while env_set_hex writes them without a prefix. This patch partially revert env_set_hex usage for affected env variables. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15board/km: add support for seli8 design based on nxp ls102xAleksandar Gerasimovski7-11/+322
The SELI8 design is a new tdm service unit card for Hitachi-Powergrids XMC and FOX product lines. It is based on NXP LS1021 SoC and it provides following interfaces: - IFC interface for NOR, NAND and external FPGA's - 1 x RGMII ETH for debug purposes - 2 x SGMII ETH for management communication via back-plane - 1 x uQE HDLC for management communication via back-plane - 1 x I2C for peripheral devices - 1 x SPI for peripheral devices - 1 x UART for debug logging It is foreseen that the design will be later re-used for another XMC and FOX service cards with similar SoC requirements. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-21dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIOIgor Opaniuk1-1/+1
Use CONFIG_IS_ENABLED() macro, which provides more convenient way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs for both SPL and U-Boot proper. CONFIG_IS_ENABLED(DM_I2C) expands to: - 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y', - 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y', - 0 otherwise. All occurences were replaced automatically using these bash cmds: $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15Merge branch '2021-02-02-drop-asm_global_data-when-unused'Tom Rini4-0/+4
- Merge the patch to take <asm/global_data.h> out of <common.h>
2021-02-08board/km: move km i2c deblock declarations to a km/common.hAleksandar Gerasimovski1-0/+5
Cleanup, move the declarations to keymile/common.h instead declaring them per-board config.h Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08PowerPC: keymile: Add support for kmcent2 boardNiel Fourie9-0/+613
Add basic support for the Hitachi Power Grids kmcent2 board, based on the NXP QorIQ T1040 SoC. Signed-off-by: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> [Fixed blank line at EOF errors] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08keymile: common: update to set_env_hex(), fix "pram" radixNiel Fourie1-16/+6
Replace instances of sprintf()/set_env() for setting hexadecimal values with set_env_hex(). In set_km_env() the "pram" variable was set to an hexadecimal value, while initr_mem() expects an unsigned decimal, so use set_env_ulong() instead. Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Holger Brunck <holger.brunck@hitachi-powergrids.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08board/km/common: fix pnvramaddr and varaddrAleksandar Gerasimovski1-3/+4
Take into account SDRAM_BASE address when calculating pnvramaddr and varaddr offsets. Up to now Keymile designs had SDRAM_BASE equal to zero and the offsets where calculated correctly, this fix is for the upcoming designs that have SDRAM_BASE different then zero. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08keymile: common: qrio: print QRIO id and revision numberAleksandar Gerasimovski2-0/+13
Add show_qrio function to print chip id and revision information. There are already multiple QRIO chip versions available and the upcoming designs may want to show used version. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08board: keymile: common: fix qrio compilation for armAleksandar Gerasimovski1-3/+4
This patch is fixing qrio driver compilation for ARM architecture: - It includes asm/io.h for in_/out_ access - It use correct names for set/clear_bits as defined in linux/bitops.h Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass4-0/+4
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-18km/kirkwood: enable USB support and the host controller driverHolger Brunck1-0/+4
Our kirkwood device embeds a USB host controller that is now used on some boards. This enables the support of USB and the corresponding driver. Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> CC: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-01km/arm: coding style clean upHolger Brunck4-92/+93
Address most of the checkpatch issues we found in km_arm and common km code. CC: Stefan Roese <sr@denx.de> CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-11-19km/ppc: use Kconfig for MEMTEST configurationHolger Brunck2-6/+8
Also change back SYS_MEMTEST_END to 0x00f00000. 0xe00000 was wrong and introduced due to the global Kconfig migration of this option in u-boot. CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
2020-11-19km: replace hardcoded address for imported environmentMatteo Ghidoni8-8/+8
Instead of using an hard coded address, make use of an already defined address for importing the environment for ramfs and nfs boot. This allows boards having different mapping to use the same code. CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
2020-10-22km: adapt defines and variables for new memory layoutHolger Brunck1-9/+3
Due to increasing kernel image sizes we get problems when decompressing the kernel image. To fix this we need to change the addresses where we load and where we extract the kernel. Also we need to adapt the address where to load the CRAMFS image and where to load the DTB file. While at it also harmonize all boards for PPC and ARM to have the same values. Also we add a new variable "env_version", so that the userspace is able to detect if this is a u-boot binary with updated values or not. CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Remove old values from kmp204x.h] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-22km: fix license string and compatible stringsHolger Brunck4-4/+4
As the ownership is now Hitachi Power Grids, change the license string and adapt the compatible string in DTS files. For kmeter1.dts we change it to "keymile,KMETER1" for now, as this is then compliant with what is submitted to the linux kernel. All other boards don't have a upstreamed version in linux mainline. Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Marek Vasut <marex@denx.de> CC: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-09-17mpc83xx, keymile boards: enable DM_ETH and add DTSHeiko Schocher3-69/+35
enable DTS support for keymile mpc83xx based boards. get rid of compile warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Therefore done: - add DTS for all mpc83xx based boards from keymile mainly they are not mainlined to linux. - add u-boot specific dtsi - add stdout-path - add missing ucc4 par_io definitions, which were in board code, but not in linux DTS - remove not used ethernet nodes Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Series-to: u-boot Series-version: 3 Series-changes: 3 - rebase patchset to current mainline commit c0192950df - update defconfig files Series-changes: 2 - add patch which fixes Codingstyle errors in drivers/qe - add patch which converts the mpc83xx based boards from keymile to DM_ETH Cover-letter: powerpc, mpc83xx: add DM_ETH support This patch series adds DM ethernet support for mpc83xx based keymile boards. Travis build: END
2020-07-17board/km: update MAINTAINERS emailHolger Brunck5-5/+5
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com>
2020-07-17treewide: convert bd_t to struct bd_info by coccinelleMasahiro Yamada6-6/+6
The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-19mpc83xx, abb: remove suvd3 boardHeiko Schocher3-53/+0
the mpc83xxx suvd3 variant is not longer used, so remove it. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19common: Drop linux/bitops.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop linux/delay.h from common headerSimon Glass5-0/+5
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop log.h from common headerSimon Glass2-0/+2
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-05 03:04:31 +0300