summaryrefslogtreecommitdiff
path: root/board/mscc
AgeCommit message (Collapse)AuthorFilesLines
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass5-0/+5
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-04mscc: Drop dm.h header fileSimon Glass1-0/+2
This header file should not be included in other header files. Remove it from each one and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop linux/bitops.h from common headerSimon Glass3-0/+3
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop linux/delay.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop log.h from common headerSimon Glass1-0/+1
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-19common: Drop image.h from common headerSimon Glass5-0/+5
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-03common: Move some board functions out of common.hSimon Glass5-0/+5
A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-08-11env: Drop environment.h header file where not neededSimon Glass1-1/+0
This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-05-03board: mscc: luton: Update MSCC Luton boardHoratiu Vultur1-2/+11
Implement method board_phy_config to configure the external phys on the pcb90. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03board: mscc: ocelot: Update MSCC Ocelot board.Horatiu Vultur1-0/+15
Implement method board_phy_config to configure the phy for pcb120. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03board: mscc: serval: Update MSCC Serval boardsHoratiu Vultur1-0/+12
In Serval SoC family there are 2 different pcb, both of them have the same phy, but with different version. Therefore implement board_phy_config and set all the phys in the same way. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03board: mscc: serval: Fix board detectHoratiu Vultur1-1/+1
When detecting the board, it was reading a register in the GPIO page of the phy and based on that value it was making a decision. The bug was that after the GPIO page for the first phy was set it was not reseted back. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-12board: mscc: jr2: Update MSCC Jaguar2 boardsHoratiu Vultur1-0/+23
In Jaguar2 SoC family there are 3 different pcb. Each of this needs to configure the phys in different ways. Therefore implement the function board_phy_config and based on pcb configure them accordingly. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-02-01MSCC: Fix Jaguar2 board detection.Horatiu Vultur1-0/+3
When power cycle the Jaguar2 boards, it couldn't read the phys, therefore it always deduce that the board type is pcb111. Add a small delay after setting the gpio pins, fix the issue. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-02-01MSCC: Jaguar2 enable debug uartHoratiu Vultur1-0/+7
Enable debug uart for Jaguar2 SoC family. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23MSCC: Add board support for Serval SoC family.Horatiu Vultur3-0/+91
Add board support and configuration for Jaguar2 SoC family. The detection of the board type is based on the phy ids. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23MSCC: Add board support for Servalt SoC familyHoratiu Vultur3-0/+69
Add board support, configuration and DTS for Servalt SoC family. Currently there is one board in this family. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23MIPS: mscc: ocelot: add switch reset supportGregory CLEMENT1-0/+24
On some ocelots platform a workaround is needed in order to be able to reset the switch without resetting the DDR. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-16MSCC: Add board support for Jaguar2 SOC familyHoratiu Vultur6-22/+169
Add board support and configuration for Jaguar2 SOC family. The detection of the board type in this family is based on the phy ids. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16mips: ocelot: Enable use of serial gpio for LEDLars Povlsen1-0/+6
This enables the use of the MSCC serial GPIO driver to control the LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16mips: luton: Enable use of serial gpio for LEDLars Povlsen1-0/+6
This enables the use of the MSCC serial GPIO driver to control the LEDs on the MSCC VCoreIII 'luton' SoC. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16mips: mscc: luton+ocelot: Remove board config options, do probingLars Povlsen2-10/+88
As we are moving to multi-dtb and board detection, remove static board config options, and introduce board probing instead. Luton: This add single-binary support for the two MSCC luton-based reference boards - pcb090 and pcb091. The SoC chip ID is used to determine the board type. Ocelot: This add single-binary support for the two MSCC ocelot-based reference boards - pcb120 and pcb123. The PHY ids on specific ports are used to determine the board type. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2018-12-19MSCC: add board support for the Luton based evaluation boardGregory CLEMENT3-0/+45
Adding the support for the Luton boards PCB91 which share common code with the Ocelots boards, including board code, device tree and configuration. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MSCC: add board support for the Ocelots based evaluation boardsGregory CLEMENT3-0/+76
Adding the support for 2 boards sharing common code for Ocelot chip: PCB120 and PCB123 Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-15 20:13:46 +0300