summaryrefslogtreecommitdiff
path: root/board/sunxi
AgeCommit message (Collapse)AuthorFilesLines
2018-08-20board: sunxi: Remove unused local variablesJagan Teki1-2/+0
variables buf from board_mmc_init, and ret from misc_init_r were unused on the functions, so remove it. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-31board: sun50i: h6: Add OrangePi One Plus initial supportJagan Teki1-0/+5
OrangePi One Plus is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - 1Gbps GMAC via RTL8211 - USB 2.0 Host, OTG - HDMI port - 5V/2A DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-07-31sunxi: add support for Pine H64 boardIcenowy Zheng1-0/+5
Pine H64 is a SBC with Allwinner H6 SoC produced by Pine64. It features 1GiB/2GiB/4GiB(3GiB usable) DRAM, two USB 2.0 ports, one USB 3.0 port and a mPCIE slot. Add support for it. The device tree is from Linux next-20180720. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-31sunxi: add MMC support for H6Icenowy Zheng1-0/+7
The Allwinner H6 SoC has 3 MMC controllers like the ones in A64, with the MMC2 come with the capability to do crypto by EMCE. Add MMC support for H6. EMCE support is not added yet. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-31sunxi: change ATF position for H6Icenowy Zheng1-2/+8
H6 has different SRAM A2 address, so the ATF load address is also different. Add judgment code to sunxi 64-bit FIT generation script. It will judge the SoC by the device tree's name. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-06-16sun50i: h5: Add initial Orange Pi Zero Plus supportHauke Mehrtens1-0/+5
Orange Pi Zero Plus is an open-source single-board computer using the Allwinner H5 SOC. H5 Orangepi Zero Plus has - Quad-core Cortex-A53 - 512MB DDR3 - micrSD slot - 16MBit SPI Nor flash - Debug TTL UART - 1GBit/s Ethernet (RTL8211E) - Wifi (RTL8189FTV) - USB 2.0 Host - USB 2.0 OTG + power supply The device tree file is copied from the Linux kernel 4.17. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-06-16sun8i: h2: Add initial Orange Pi R1 supportHauke Mehrtens1-0/+5
Orange Pi R1 is an open-source single-board computer using the Allwinner H2+ SOC. H2+ Orange Pi R1 has - Quad-core Cortex-A7 - 256MB DDR3 - micrSD slot - 128MBit SPI Nor flash - Debug TTL UART - 100MBit/s Ethernet (H2+) - 100MBit/s Ethernet (RTL8152B) - Wifi (RTL8189ETV) - USB 2.0 OTG + power supply This board is very similar to the Orange Pi Zero. The device tree file is copied from the Linux kernel 4.17. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-06-04board: sun50i: Add Amarula A64-Relic initial supportJagan Teki1-0/+6
Amarula A64-Relic is A64 based IoT device, which support - Allwinner A64 Cortex-A53 - Mali-400MP2 GPU - AXP803 PMIC - 1GB DDR3 RAM - 8GB eMMC - AP6330 Wifi/BLE - MIPI-DSI - CSI: OV5640 sensor - USB OTG - 12V DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-05-28sunxi: Drop legacy usb_phy.cJagan Teki1-7/+0
Allwinner PHY USB code is now part of generic-phy framework, so drop existing legacy handling like arch/arm/mach-sunxi.c and related code areas. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28board: sunxi: Use generic-phy for board_usb_cable_connectedJagan Teki1-1/+32
Allwinner PHY USB code is now part of generic-phy framework, so use it in board_usb_cable_connected. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-09Merge git://git.denx.de/u-boot-sunxiTom Rini1-1/+8
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini2-5/+2
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07board: sunxi: sun8i-v40: Add Bananapi M2 Berry supportJagan Teki1-0/+5
Banana Pi BPI-M2 Berry is a quad-core mini single board computer built with Allwinner V40 SoC. It features - Quad Core ARM Cortex A7 CPU V40 - 1GB of RAM . - microSD/SATA port.. - onboard WiFi and BT - 4 USB A 2.0 ports - 1 USB OTG port - 1 HDMI port - 1 audio jack - DC power port Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-05-01sunxi: Add Libre Computer Board ALL-H3-CC H5 ver.Chen-Yu Tsai1-0/+1
This patch adds a device tree file for the H5 version of the Libre Computer Board ALL-H3-CC. It is the same board first introduced in commit afe27544125e ("sunxi: Add support for Libre Computer Board ALL-H3-CC H3 ver."), with the H3 SoC replaced with the H5 SoC, and has 4Gb DDR3 chips instead of 2Gb ones. The device tree utilizes the common board design file for ALL-H3-CC, providing just the model strings and SoC specifics. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-05-01sunxi: Add Libre Computer Board ALL-H3-CC H2+ ver.Chen-Yu Tsai1-1/+2
This patch adds a device tree file for the H2+ version of the Libre Computer Board ALL-H3-CC. It is the same board first introduced in commit afe27544125e ("sunxi: Add support for Libre Computer Board ALL-H3-CC H3 ver."), with the H3 SoC replaced with the H2+ SoC, and has only two 2Gb DDR3 chips instead of four. The device tree utilizes the common board design file for ALL-H3-CC, providing just the model strings and SoC specifics. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-04sunxi: README.sunxi64: Add hint about non-debug of ARM Trusted FirmwareAndre Przywara1-0/+6
As we are running into issues where the final U-Boot FIT image file is exceeding our size limit, add a hint to the README.sunxi64 file to point out the possibility of building non-debug versions of the ATF binary. These are about 12KB smaller than the standard debug build, and so allow successful U-Boot builds for many boards with the Allwinner H5 SoC. Please note that under normal circumstances the debug build is still recommended, as it gives valuable clues in case something goes wrong in the ATF. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-03sunxi: spl: remove DMA related settings of the NAND controllerMiquel Raynal1-5/+0
Code has been changed to do not use DMA anymore with the NAND controller, instead PIO is used. Then, DMA-specific initialization may be dropped. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-04-03sunxi: spl: deassert the NAND controller reset lineMiquel Raynal1-0/+4
Ensure the NAND controller reset line is deasserted before use. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-13sunxi: Add A20-SOM204-EVB-eMMC boardStefan Mavrodiev1-0/+1
A20-SOM204 board has option with onboard 16GB eMMC. The chip is wired to MMC2 slot. This patch adds defconfig and dts files for this board. The dts is same with mainline kernel. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-03-13sunxi: Add A20-SOM204-EVB boardStefan Mavrodiev1-0/+5
This is new System-On-Module platform with universal dimm socket for easy insertation. The EVB board is designed to be universal with future modules. Base features of A20-SOM204 board includes: * 1GB DDR3 RAM * AXP209 PMU * KSZ9031 Gigabit PHY * AT24C16 EEPROM * Status LED * LCD connector * GPIO connector There will be variants with the following options: * Second LAN8710A Megabit PHY * 16MB SPI Flash memory * eMMC card * ATECC508 crypto device The EVB board has: * Debug UART * MicroSD card connector * USB-OTG connector * Two USB host * RTL8723BS WiFi/BT combo * IrDA transceiver/receiver * HDMI connector * VGA connector * Megabit ethernet transceiver * Gigabit ethernet transceiver * SATA connector * CAN driver * CSI camera * MIC and HP connectors * PCIe x4 connector * USB3 connector * Two UEXT connectors * Two user LEDs Some of the features are multiplexed and cannot be used the same time: CAN and Megabit PHY. Others are not usable with A20 SoC: PCIe and USB3. This patch adds defconfig and dts files for this board. The dts is same with mainline kernel, except some nodes are removed to make file compatible with existing dtsi file. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-03-13ARM: sunxi: Build u-boot-sunxi-with-spl.bin on ARM64 as wellTuomas Tynkkynen1-2/+1
In README.sunxi64 we tell the user how to optionally create u-boot-sunxi-with-spl.bin by manually running cat. Instead, have the build system create the file automatically just like it does for 32-bit sunxi boards. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-03-05libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>Masahiro Yamada1-1/+1
Thomas reported U-Boot failed to build host tools if libfdt-devel package is installed because tools include libfdt headers from /usr/include/ instead of using internal ones. This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.h and replaces include directives: #include <libfdt.h> -> #include <linux/libfdt.h> #include <libfdt_env.h> -> #include <linux/libfdt_env.h> Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-05MAINTAINERS: Update email address for Maxime RipardMaxime Ripard1-3/+3
Free Electrons is no more and is now known as Bootlin, change my email address accordingly. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-01-27sunxi: Transition from the MMC to a FAT-based environmentMaxime Ripard1-0/+16
The current environment has been hardcoded to an offset that starts to be an issue given the current size of our main U-Boot binary. By implementing a custom environment location routine, we can always favor the FAT-based environment, and fallback to the MMC if we don't find something in the FAT partition. We also implement the same order when saving the environment, so that hopefully we can slowly migrate the users over to FAT-based environment and away from the raw MMC one. Eventually, and hopefully before we reach that limit again, we will have most of our users using that setup, and we'll be able to retire the raw environment, and gain more room for the U-Boot binary. Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2018-01-16sunxi: arm64: correct usage of DT node address in FIT generationAndre Przywara1-8/+8
The DT spec demands a unit-address in a node name to match the "reg" property in that node. Newer dtc versions will throw warnings if this is not the case. Adjust the FIT build script for 64-bit Allwinner boards to remove the bogus addresses from the node names and avoid the warnings. This avoids a warning with recent versions of the dtc tool. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-01-10sunxi: maintainers: Add myself for the TBS A711Maxime Ripard1-0/+5
Support for that board got introduced recently without the maintainers part. Let's fix that. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2018-01-10sunxi: Add support for Libre Computer Board ALL-H3-CC H3 ver.Chen-Yu Tsai1-0/+5
The Libre Computer Board ALL-H3-CC from Libre Technology is a Raspberry Pi B+ form factor single board computer based on the Allwinner H3 SoC. The board has 1GB DDR3 SDRAM, provided by 4 2Gb chips. The mounting holes and connectors are in the exact same position as on the Raspberry Pi B+. Raspberry Pi B+ like peripherals supported on this board include: - Power input through micro-USB connector (without USB OTG) - Native 100 Mbps ethernet using the internal PHY, as opposed to USB-based on the RPi - 4x USB 2.0 host ports, directly connected to the SoC, as opposed to being connected through a USB 2.0 hub on the RPi - TV and audio output on a 3.5mm TRRS jack - HDMI output - Micro-SD card slot - Standard RPi B+ GPIO header, with the standard peripherals routed to the same pins. * 5V, 3.3V power, and ground * I2C0 on the H3 is routed to I2C1 pins on the RPi header * I2C1 on the H3 is routed to I2C0 pins on the RPi header * UART1 on the H3 is routed to UART0 pins on the RPi header * SPI0 on the H3 is routed to SPI0 pins on the RPi header, with GPIO pin PA17 replacing the missing Chip Select 1 * I2S1 on the H3 is routed to PCM pins on the RPi header - Additional peripherals from the H3 are available on different pins. These include I2S0, JTAG, PWM1, SPDIF, SPI1, and UART3 In addition, there are a number of new features: - Console UART header - Consumer IR receiver - Camera interface (not compatible with RPi) - Onboard microphone - eMMC expansion module port - Heatsink mounting holes This patch adds defconfig and dts files for this board. The dts file is the same as the one submitted for inclusion in Linux, with some minor revisions to match the dtsi file and old EMAC bindings in U-boot. Since the OTG controller is wired to a USB host port, and the H3 has proper USB hosts to handle host mode, the MUSB driver is not enabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2017-12-07sunxi: Fix A20-OLinuXino-MICRO LAN8710 supportStefan Mavrodiev1-0/+4
>From revision J the board uses new phy chip LAN8710. Compared with RTL8201, RA17 pin is TXERR. It has pullup which causes phy not to work. To fix this PA17 is muxed with GMAC function. This makes the pin output-low. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-11-21sun50i: h5: Add NanoPi Neo Plus2 DT initial supportAntony Antony1-0/+5
Add initial DT for NanoPi NEO Plus2 by FriendlyARM - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU - 1 GB DDR3 RAM - 8GB eMMC flash (Samsung KLM8G1WEPD-B031) - micro SD card slot - Gigabit Ethernet (external RTL8211E-VB-CG chip) - 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module) - 2x USB 2.0 host ports Signed-off-by: Antony Antony <antony@phenome.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-11-10sunxi: SATA link timeout fixWerner Böllmann1-0/+2
After updating u-boot from v2016.01 to 2017.09, issue with "SATA link 0 timeout." on my Cubietruck board. mdelay milled after moving satapwr code to board. "sunxi: Turn satapwr on from board_init" (sha1: 9fbb0c3aa49f4604b0342cb527a6bd099f92eaeb) After adding the "mdelay(500);" line that was lost in the path the error is gone. Signed-off-by: Werner Böllmann <Werner.Boellmann@fh-dortmund.de> [Rebased and updated change and commit message] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-11-06MAINTAINERS: Add missing boards and config entriesTom Rini1-0/+9
As part of my usual round of build testing, output about missing MAINTAINERS information was not logged, and thus often overlooked. Correct that mistake by ensuring that I log the output of genboardscfg.py every time. As part of that, address a number of missing MAINTAINERS entires. In the case of a missing file, I have put the original submitter down. In the rest of the cases I have added the config (and sometimes relevant header file) to the existing set of file globs. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-03sunxi: only init USB Ethernet gadget when it's enabledIcenowy Zheng1-0/+2
If the USB Ethernet gadget is not yet enabled, the call of usb_ether_init in board/sunxi/board.c will lead to undefined reference error when building. Fix this problem. Fixes: 50ddbf1199a0 ("sunxi: Register usb_ether") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03sun7i: a20: Add Bananapi M1 Plus supportJagan Teki1-0/+5
Banana Pi M1 Plus is an open-source single-board computer that adds more connectivity to the classic board using Allwinner A20 SOC. Bananapi M1-Plus features: - A20 Dual-core 1.0GHz - 1 GB DDR3 SDRAM - MicroSD - 10/100/1000 Ethernet RJ45 - WiFi b/g/n - 5V DC Micro USB power-supply For dts file, Sync with Linux commit f92ca09("Merge branch 'akpm/master'"). Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-10-03sunxi: Remove the MMC index hackMaxime Ripard1-14/+6
The current code, if there's both an eMMC and an MMC slot available on the board, will swap the MMC indices based on whether we booted from the eMMC or the MMC. This way, the MMC we're supposed to boot on will always have the index 0. However, this causes various issues, for example when using other components that base their behaviour on the MMC index, such as fastboot. Let's remove that hack, and take the opposite approach. The MMC will always have the same index, but the bootcmd will pick the same device than the one we booted from. This is done through the introduction of the mmc_bootdev environment variable that will be filled by the board code based on the boot device informations we can get from the SoC. In order to not introduce regressions, we also need to adjust the fastboot MMC device and the environment device in order to set it to the eMMC, over the MMC, like it used to be the case. Tested-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03sunxi: Use sunxi_get_boot_deviceMaxime Ripard1-1/+5
Our current board code duplicates a bit the sunxi_get_boot_device logic. Now that we can use that function in the full-flavoured U-Boot, remove that duplication and call the function instead. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03sunxi: Register usb_etherMaxime Ripard1-0/+2
Call the function to register the usb_ether gadget in the board. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03musb: sunxi: switch to the device modelMaxime Ripard1-1/+0
The device model was implemented so far using a hook that needed to be called from the board support, without DT support and only for the host. Switch to probing both in peripheral and host mode through the DT. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-01sunxi: Fix CONFIG_SUNXI_GMAC referencesDave Prue1-1/+1
SUNXI_GMAC was still used to configure the code where as the same has been renamed and moved to Kconfig in below commit "sunxi: Move SUNXI_GMAC to Kconfig" (sha1: 4d43d065db3262f9a9918ba72457bf36dfb8e0bb) Signed-off-by: Dave Prue <dave@prue.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Mark Kettenis <kettenis@openbsd.org> Tested-by: Mark Kettenis <kettenis@openbsd.org> [Tweek commit message, config_whitelist.txt, build-whitelist.sh] Signed-off-by: Jagan Teki <jagan@openedev.com>
2017-08-17Merge git://git.denx.de/u-boot-sunxiTom Rini1-0/+15
Update A20-OLinuXino-Lime2-eMMC_defconfig to include CONFIG_SCSI Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-16env: Rename getenv/_f() to env_get()Simon Glass1-3/+3
We are now using an env_ prefix for environment functions. Rename these two functions for consistency. Also add function comments in common.h. Quite a few places use getenv() in a condition context, provoking a warning from checkpatch. These are fixed up in this patch also. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr()Simon Glass1-1/+1
Rename this function for consistency with env_set(). Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16env: Rename common functions related to setenv()Simon Glass1-1/+1
We are now using an env_ prefix for environment functions. Rename these commonly used functions, for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16env: Rename setenv() to env_set()Simon Glass1-4/+4
We are now using an env_ prefix for environment functions. Rename setenv() for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-15sun50i: a64: Add A64-OLinuXino initial supportJagan Teki1-0/+5
OLimex A64-OLinuXino is an open-source hardware board using the Allwinner A64 SOC. OLimex A64-OLinuXino has - A64 Quad-core Cortex-A53 64bit - 1GB or 2GB RAM DDR3L @ 672Mhz - microSD slot and 4/8/16GB eMMC - Debug TTL UART - HDMI - LCD - IR receiver - 5V DC power supply Tested-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-08-15sun50i: a64: Add initial NanoPi A64 supportJagan Teki1-0/+5
NanoPi A64 is a new board of high performance with low cost designed by FriendlyElec., using the Allwinner A64 SOC. Nanopi A64 features - Allwinner A64, 64-bit Quad-core Cortex-A53@648MHz to 1.152GHz, DVFS - 1GB DDR3 RAM - MicroSD - Gigabit Ethernet (RTL8211E) - Wi-Fi 802.11b/g/n - IR receiver - Audio In/Out - Video In/Out - Serial Debug Port - microUSB 5V 2A DC power-supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2017-08-11sun7i: Add support for Olimex A20-OLinuXino-LIME2-eMMCOlliver Schinagl1-0/+5
This patch adds support for the Olimex OLinuXino Lime2 with eMMC flash storage. https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2-eMMC/ It is a assembly variant of the regular Lime2 but featuring eMMC for storage. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-08-01dm: sata: sunxi: Add support for driver modelSimon Glass1-3/+58
Adjust SATA setup to support driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-01dm: sunxi: sata: Don't build sata support into SPLSimon Glass1-0/+2
This is not used in SPL so we do not need to compile it. Make this change before adding driver-model support to the driver, to avoid build errors. With driver model we define a U_BOOT_DRIVER() which would otherwise be present in SPL and not be garbage-collected when building. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-06-14sun50i: h5: Add initial NanoPi NEO2 supportJagan Teki1-0/+5
NanoPi NEO2 is designed and developed by FriendlyElec using the Allwinner 64-bit H5 SOC. NanoPi Neo2 key features - Allwinner H5, Quad-core 64-bit Cortex-A53 - 512MB DDR3 RAM - microSD slot - 10/100/1000M Ethernet - Serial Debug Port - 5V 2A DC MicroUSB power-supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2017-06-14sun50i: a64: Add initial Orangepi Win/WinPlus supportJagan Teki1-0/+5
Orangepi Win/WinPlus is an open-source single-board computer using the Allwinner A64 SOC. A64 Orangepi Win/WinPlus has - A64 Quad-core Cortex-A53 64bit - 1GB(Win)/2GB(Win Plus) DDR3 SDRAM - Debug TTL UART - Four USB 2.0 - HDMI - LCD - Audio and MIC - Wifi + BT - IR receiver - 5V DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-21 01:23:01 +0300