summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2020-09-25Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 ↵Tom Rini15-1/+461
into next - Enhance the 'zboot' command to be more like 'bootm' with sub-commands - The last series of ACPI core changes for programmatic generation of ACPI tables - Add all required ACPI tables for ApolloLake and enable ACPIGEN on Chromebook Coral - A feature minor enhancements to the 'hob' command - Intel edison: Support for writing an xFSTK image via binman
2020-09-25x86: edison: Generate an image suitable for xFSTKSimon Glass2-0/+48
It is useful to be able to flash Edison directly without relying on the installed U-Boot being functional. Add a binman image for this. It includes a 'OSIP' header (which happens to look like an MBR / (Master-Boot Record), U-Boot binary and an environment. I am not able to find a specification for OSIP. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-25x86: coral: Add audio descriptor filesSimon Glass5-0/+0
Add files describing the various audio configurations supported on coral. These are passed to Linux in the ACPI tables. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-09-25x86: coral: Add ACPI tables for coralSimon Glass7-0/+412
This device has a large set of ACPI tables. Bring these in from coreboot so that full functionality is available (apart from SMI). Signed-off-by: Simon Glass <sjg@chromium.org>
2020-09-25x86: apl: Correct PCIE_ECAM_BASESimon Glass1-1/+1
This value is incorrect and causes problems booting Linux. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-24Merge tag 'xilinx-for-v2021.01' of ↵Tom Rini3-186/+204
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2021.01 arm64: - Support for bigger U-Boot images compiled with PIE microblaze: - Extend support for LE/BE systems zynqmp: - Refactor silicon ID detection code with using firmware interface - Add support for saving variables based on bootmode zynqmp-r5: - Fix MPU mapping and defconfig setting. xilinx: - Minor driver changes: names alignment - Enable UBIFS - Minor DT and macros fixes - Fix boot with appended DT - Fix distro boot cmd: - pxe: Add fixing for platforms with manual relocation support clk: - fixed_rate: Add DM flag to support early boot on r5 fpga: - zynqmppl: Use only firmware interface and enable SPL build serial: - uartlite: Enable for ARM systems and support endians mmc: - zynq: Fix indentation net: - gem: Support for multiple phys - emac: Fix 64bit support and enable it for arm64 kconfig: - Setup default values for Xilinx platforms - Fix dependecies for Xilinx drivers - Source board Kconfig only when platform is enabled - Fix FPGA Kconfig entry with SPL - Change some defconfig values bindings: - Add binding doc for vsc8531
2020-09-24board/freescale: Remove P5020DS board supportPriyanka Jain6-52/+0
Remove NXP powerpc P5020DS board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24powerpc:Remove P4080DS secure boot configsPriyanka Jain1-1/+0
Remove NXP powerpc P4080DS secure boot configs as they are no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: Remove P3041DS secure boot configsPriyanka Jain1-1/+0
Remove NXP powerpc P3041DS secure boot configs as they are no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1024RDB board supportPriyanka Jain2-6/+0
Remove NXP powerpc P1024RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1021RDB board supportPriyanka Jain4-88/+1
Remove NXP powerpc P1021RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1020MBG board supportPriyanka Jain3-8/+3
Remove NXP powerpc P1020MBG board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1020UTM board supportPriyanka Jain4-8/+1
Remove NXP powerpc P1020UTM board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove P1025RDB board supportPriyanka Jain5-49/+4
Remove NXP powerpc P1025RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24configs: Remove P1010RDB secure boot configsPriyanka Jain1-12/+0
Remove NXP powerpc P1010RDB secure boot configs as they are no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24board/freescale: Remove p1023rdb board supportPriyanka Jain7-386/+0
Remove NXP powerpc p1023rdb board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24p1010rdb: Don't compile board_eth_init() for DM_ETHHou Zhiqiang1-0/+2
The board_eth_init() is only used by legacy ethernet driver framework, so do not compile it when DM_ETH config has been selected. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24p1_p2_rdb: Don't compile board_eth_init() for DM_ETHHou Zhiqiang1-0/+2
The board_eth_init() is only used by legacy ethernet driver framework, so do not compile it when DM_ETH config has been selected. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r()Hou Zhiqiang1-17/+18
Move vsc7835 firmware uploading to board_early_init_r(), so that the switch also can work in DM eTSEC driver. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-23fpga: kconfig: Rename SPL_FPGA_SUPPORT to SPL_FPGAMichal Simek1-7/+2
The patch does sed 's/SPL_FPGA_SUPPORT/SPL_FPGA/g' but also fixing Makefile and zynqmp.c to simplify if/endif logic in zynqmp.c. This change is mostly done to be able to use CONFIG_IS_ENABLED macro and obj-$(CONFIG_$(SPL_)FPGA) in Makefile. For them symbols need to be in sync. And removing one line from Topic Miami boards which is not needed because symbol is not enabled via Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-23xilinx: common: Do not save fdt_blob to bss sectionMichal Simek1-1/+1
For SPL flow without specifying address for DT loading DTB is automatically appended behind U-Boot code. Specifically _end symbol is used. Just behind it there is place for bss section. It means if early code is using static variable and there is a write to this variable DTB file is corrupted if variable is located between DTB start and end. In this particular case offset of this variable from bss section start is very small (0x40) that's why DT is currupted which breaks this boot flow. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23xilinx: zynqmp: Add support for saving variablesMichal Simek1-0/+35
Enabling saving variables to MMC(FAT), NAND, SPI based on primary bootmode. Maybe that logic can be tuned for more complicated use cases and better tested for different bootmodes. Tested on zcu104 to SD(FAT) and JTAG(NOWHERE). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23xilinx: zynqmp: Get zynqmp_get_bootmode() out of CONFIG_BOARD_LATE_INITMichal Simek1-18/+18
This function will be also used by different code. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23xilinx: zynqmp: Remove one static variableMichal Simek1-3/+3
There is no reason to have name variable saved in BSS section when it doesn't need to be really used. That's why remove static from variable definition and use strdup() to duplicate string with exact size from malloc area instead. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23xilinx: zynqmp: Add missing 43/46/47dr ID codesMichal Simek1-0/+15
Add support for 43/46/47dr devices. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23xilinx: zynqmp: refactor silicon name functionIbai Erkiaga1-165/+138
Current algorithm used to get the silicon name is bit complicated and hard to follow. Updated to use more straightforward mechanism based on the Device ID code table (Table 1-2). The full IDCODE register is used (except device revision bits [31:28]) to get the device name and IDCODE2 value is used for identifying the variant. Additionally to make the algorithm bit more clear it also save some space as the devices table is slightly bit smaller. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23board: xilinx: Enable changing default DTB pick up addressMichal Simek1-1/+1
U-Boot on xilinx boards is checking one address where DTB can be placed as the first location for DTB. Originally this code was developed for Versal where QEMU was putting generated DTB for U-Boot to use. The patch enables changing this address which is necessary for cases where default address is pointing to location (DDR) which is not present. The access to this location can cause exception. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-22sunxi: Drop the FIT-generator scriptSimon Glass1-87/+0
This file is no-longer used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-09-21Merge branch '2020-09-14-generic-phy-error-trace' into nextTom Rini1-1/+1
- Add error tracing messages to the generic PHY infrastructure
2020-09-21Merge branch 'master' into nextTom Rini10-27/+9
Merge in v2020.10-rc5
2020-09-21x86: edison: Move config SYS_MALLOC_LEN to KconfigAndy Shevchenko1-0/+3
This patch moves the the config SYS_MALLOC_LEN to Kconfig as it is already done for zynq arch in commit 01aa5b8f0503 ("Kconfig: Move config SYS_MALLOC_LEN to Kconfig for zynq"). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-17apalis-imx8qm: rename all occurences to apalis-imx8Philippe Schenker2-1/+1
The Toradex product is called apalis-imx8 consisting of SoM with i.MX8QM and i.MX8QP SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri-imx8qxp: rename all occurences to colibri-imx8xPhilippe Schenker2-1/+1
The Toradex product is called colibri-imx8x consisting of SoM with i.MX8QXP and i.MX8DX SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri_imx7: wrap video specific funcs with ifdefsIgor Opaniuk1-0/+2
Wrap video specific functionality with ifdefs. Fixes: 195011b24d("colibri-imx7: fix splash logo drawing") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17toradex: drop legacy show_boot_logo function and use splashscreenIgor Opaniuk1-19/+0
Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri_imx7: use splashcreen value instead of legacy functionIgor Opaniuk1-2/+0
Set proper splashscreen env value instead of calling legacy function to show embed boot logo. Fixes: 195011b24d("colibri-imx7: fix splash logo drawing") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri-imx6ull: use splashcreen value instead of legacy functionIgor Opaniuk1-2/+0
Set proper splashscreen env value instead of calling legacy function to show embed boot logo. Fixes: 391c712dde("colibri-imx6ull: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17mpc83xx, keymile boards: enable DM_ETH and add DTSHeiko Schocher3-69/+35
enable DTS support for keymile mpc83xx based boards. get rid of compile warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Therefore done: - add DTS for all mpc83xx based boards from keymile mainly they are not mainlined to linux. - add u-boot specific dtsi - add stdout-path - add missing ucc4 par_io definitions, which were in board code, but not in linux DTS - remove not used ethernet nodes Signed-off-by: Heiko Schocher <hs@denx.de> Patch-cc: Mario Six <mario.six@gdsys.cc> Patch-cc: Qiang Zhao <qiang.zhao@nxp.com> Series-to: u-boot Series-version: 3 Series-changes: 3 - rebase patchset to current mainline commit c0192950df - update defconfig files Series-changes: 2 - add patch which fixes Codingstyle errors in drivers/qe - add patch which converts the mpc83xx based boards from keymile to DM_ETH Cover-letter: powerpc, mpc83xx: add DM_ETH support This patch series adds DM ethernet support for mpc83xx based keymile boards. Travis build: END
2020-09-16rockchip: rv1108: use correct API for board callbackKever Yang2-2/+2
Use board_early_init_f() instead of mach_cpu_init() for board, the board_early_init_f() is used for board init and after dm_initf, while the mach_cpu_init() is used for CPU/SOC and before dm_initf()(not able to use syscon API). Fixes: 9cec336708 ("rockchip: evb-rv1108: Use syscon API to get grf base") Fixes: 4aa33690fc {"rockchip: elgin-rv1108: Use syscon API to get grf base") Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-09-15Merge tag 'ti-v2021.01-next' of ↵Tom Rini2-0/+8
https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next - Hyperflash boot for J7200 - Update Main R5FSS lockstep mode - R5F remoteproc support for J7200 - Minor env fixes - Add SPI boot support for am335x-icev2
2020-09-15configs: Add spiboot support for am335xFaiz Abbas1-0/+1
am335x internal SRAM is too small to support the addition of SPI bootmode to the default defconfig. Add a separate spiboot_defconfig Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-09-15board: ti: j721e: Add support for HyperFlash detectionVignesh Raghavendra1-0/+7
On J7200 SoC OSPI and HypeFlash are muxed at HW level and only one of them can be used at any time. J7200 EVM has both HyperFlash and OSPI flash on board. There is a user switch (SW3.1) that can be toggled to select OSPI flash vs HyperFlash. Read the state of this switch via wkup_gpio0_6 line and fixup the DT nodes to select OSPI vs HyperFlash Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-09-09board: ns3: check bnxt chimp handshake statusRayagonda Kokatanur1-0/+17
Chimp is a core in Broadcom netxtream controller (bnxt). Add support to check bnxt's chimp component status. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09board: ns3: kconfig: extend board kconfig with specific commandsVladimir Olovyannikov1-0/+7
Extend Kconfig for the board with board-specific commands selection. Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-08board: sunxi: change trace level for phy errors managed by uclassPatrick Delaunay1-1/+1
As the error message is now displayed by generic phy functions, the pr_err can be change to pr_idebug. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-07Merge branch 'remove-config-nr-dram-banks-v9-2020-08-26' of ↵Tom Rini10-23/+0
https://gitlab.denx.de/u-boot/custodians/u-boot-marvell into next
2020-09-03Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini4-4/+20
- Mostly DFU fixes and r8152 fixes
2020-09-01fastboot: Extend fastboot_set_reboot_flag with reboot reasonRoman Kovalivskyi4-4/+20
Extend fastboot_set_reboot_flag arguments with reboot reason so that it could handle different reboot cases in future. Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@globallogic.com>
2020-09-01x86: qemu: Remove dead codeAndy Shevchenko3-9/+1
start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply replace the rule in it. We use stub C-file like it's done for other boards. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-01x86: intel: slimbootloader: Remove dead codeAndy Shevchenko2-10/+1
start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-01 02:35:01 +0300