summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2021-10-18board: arm: Remove OF_PRIOR_STAGE from the remaining Arm boardsIlias Apalodimas1-0/+6
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got introduced, in order to support a DTB handed over by an earlier stage boo loader. However we have another option in the Kconfig (OF_BOARD) which has identical semantics. So let's remove the option in an effort to simplify U-Boot's config and DTB management, and use OF_BOARD instead. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-18riscv: Remove OF_PRIOR_STAGE from RISC-V boardsIlias Apalodimas2-1/+14
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got introduced, in order to support a DTB handed over by an earlier stage boo loader. However we have another option in the Kconfig (OF_BOARD) which has identical semantics. On RISC-V some of the boards pick up the DTB from a1 and copy it in their private gd_t. Apart from that they copy it to prior_stage_fdt_address, if the Kconfig option is selected, which is unnecessary. So let's switch the config option for those boards to OF_BOARD and define the required board_fdt_blob_setup() for them. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-10-16Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-tegraTom Rini3-265/+23
On merge, fixup order of fdtdec_add_reserved_memory parameters in arch/arm/cpu/armv8/fsl-layerscape/soc.c Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-15board/km: update MAINTAINERS filesHolger Brunck4-6/+5
Update the e-mail addresses and person responsible. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com> CC: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> CC: Rainer Boschung <rainer.boschung@hitachienergy.com>
2021-10-14ARM: tegra: Refactor DT update helpersThierry Reding3-355/+21
Rather than duplicate the Ethernet MAC address and carveout updating code for each board, move it to a common location and make it more reusable. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-14ARM: tegra: Support EMC frequency tables on Tegra210Thierry Reding2-0/+2
The EMC frequency tables are created from a training sequence performed during early boot and passed in via a reserved memory region by nvtboot. Copy this table to the kernel DTB so that the kernel can use it to scale the EMC frequency at runtime. Note that early bootloaders store the EMC table at an address that currently intersects with the load address of the initial ramdisk. In order to avoid copying the table to a different address, simply change the load address for the initial ramdisk in U-Boot. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-14ARM: tegra: Support multiple reserved memory regionsThierry Reding3-39/+126
Support multiple reserved memory regions per device to support platforms that use both a framebuffer and color conversion lookup table for early boot display splash. While at it, also pass along the name, compatible strings and flags of the carveouts. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-14fdtdec: Support reserved-memory flagsThierry Reding3-6/+6
Reserved memory nodes can have additional flags. Support reading and writing these flags to ensure that reserved memory nodes can be properly parsed and emitted. This converts support for the existing "no-map" flag to avoid extending the argument list for fdtdec_add_reserved_memory() to excessive length. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-14fdtdec: Reorder fdtdec_set_carveout() parameters for consistencyThierry Reding3-6/+6
The fdtdec_set_carveout() function's parameters are inconsistent with the parameters passed to fdtdec_add_reserved_memory(). Fix up the order to make it more consistent. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-14fdtdec: Support compatible string list for reserved memoryThierry Reding3-6/+9
Reserved memory nodes can have a compatible string list to identify the type of reserved memory that they represent. Support specifying an optional compatible string list when creating these nodes. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-14fdtdec: Support retrieving the name of a carveoutThierry Reding3-3/+3
When retrieving a given carveout for a device, allow callers to query the name. This helps differentiating between carveouts when there are more than one. This is also useful when copying carveouts to help assign a meaningful name that cannot always be guessed. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-12Merge tag 'u-boot-stm32-20211012' of ↵Tom Rini11-27/+1
https://source.denx.de/u-boot/custodians/u-boot-stm - Disable ATAGS for STM32 MCU and MPU boards - Disable bi_boot_params for STM32 MCU and MPU boards - Update stm32-usbphyc node management - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards - Convert some USB config flags to Kconfig for various boards - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board - Remove specific CONFIG_STV0991 flags - Remove unused CONFIG_USER_LOWLEVEL_INIT flag - Add ofdata_to_platdata() callback for stm32_spi driver - Update for stm32f7_i2c driver - Remove gpio_hog_probe_all() from STM32 MP1 board - Fix bind command Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-12Merge https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini3-117/+46
The bulk of it is Samuel's DM_I2C rework, which removes the nasty I2C deprecation warnings for most 32-bit boards. It also includes some smaller refactorings that pave the way for more changes, mostly driven by needing to support the Allwinner RISC-V SoC later on. Board wise we gain support for the FriendlyARM NanoPi R1S H5 router board and official Pinetab support. Build-tested for all 160 sunxi boards, and boot tested on a A64, A20, H3, H6, and H616 board. USB, SD card, eMMC, and Ethernet all work there (where applicable).
2021-10-12cmd: bind: Fix driver binding on a devicePatrice Chotard1-1/+1
Fix a regression brings by commit 84f8e36f03fa ("cmd: bind: allow to bind driver with driver data") As example, the following bind command doesn't work: bind /soc/usb-otg@49000000 usb_ether As usb_ether driver has no compatible string, it can't be find by lists_bind_fdt(). In bind_by_node_path(), which called lists_bind_fdt(), the driver entry is known, pass it to lists_bind_fdt() to force the driver entry selection. For this, add a new parameter struct *driver to lists_bind_fdt(). Fix also all lists_bind_fdt() callers. Fixes: 84f8e36f03fa ("cmd: bind: allow to bind driver with driver data") Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reported-by: Herbert Poetzl <herbert@13thfloor.at> Cc: Marek Vasut <marex@denx.de> Cc: Herbert Poetzl <herbert@13thfloor.at> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-12sunxi: video: Convert panel I2C to use DM_I2CSamuel Holland1-43/+1
Two displays supported by the sunxi display driver (each one used by a single board) require initialization over I2C. Both previously used i2c_soft; replace this with the i2c-gpio instance that already exists in those boards' device trees (sun5i-a13-utoo-p66 and sun6i-a31-colombus). Since the i2c-gpio nodes are not referenced by any other node in the device trees (the device trees have no panel node), the I2C bus is selected by its node name. This panel initialization code was the only i2c_soft user, so the i2c_soft GPIO setup code can be removed now as well. Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11ARM: omap3_logic: Cleanup usage of MUX_VALAdam Ford1-193/+193
The macro called MUX_VAL generates a writel instruction with semicolon at the end. This table was written to use semicolons, however one was missed: MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /* GPIO_4 */ Since the extra semicolon is unnecessary with the use of the macro, remove all of them, and cleanup whitespace. Reviewed-by: Wolfgang Denk <wd@denx.de> Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-11sunxi: Add support for FriendlyARM NanoPi R1S H5Chukun Pan1-0/+5
This adds support for the NanoPi R1S H5 board. Allwinner H5 SoC 512MB DDR3 RAM 10/100/1000M Ethernet x 2 RTL8189ETV WiFi 802.11b/g/n USB 2.0 host port (A) MicroSD Slot Reset button Serial Debug Port WAN - LAN - SYS LED The dts file is taken from Linux 5.14 tag. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11sunxi: Clean up inclusions of asm/arch/gpio.hSamuel Holland2-2/+0
As part of migrating to DM_GPIO and DM_PINCTRL, eventually we will remove the asm/arch/gpio.h header. In preparation, clean up the various files that include it. Some files did not contain any GPIO code at all, so this header was completely unused. A few files contained only legacy platform-specific GPIO code for setting up pin muxes. They were left unchanged, as that code will be completely removed by the DM_PINCTRL migration. The remaining files contain some combination of DM_GPIO and legacy GPIO code. For those, switch to including asm/gpio.h (if it wasn't included already). Right now, this header provides both sets of functions, because ARCH_SUNXI selects GPIO_EXTRA_HEADER. This will still be the right header to include once the DM_GPIO migration is complete and GPIO_EXTRA_HEADER is no longer needed. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11board: sunxi: enable status LED earlyArnaud Ferraris1-0/+6
For some systems, such as the PinePhone, there is no way for the end user to make sure the system is indeed booting before the boot script is executed, which takes several seconds. Therefore, it can be useful to provide early visual feedback as soon as possible. In order achieve this goal, this patch initializes the status LED (if configured) in the SPL. Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11sunxi: Simplify MMC pinmux selectionSamuel Holland1-72/+29
Only one board, Yones Toptech BD1078, actually uses a non-default MMC pinmux. All other uses of these symbols select the default value or an invalid value. To simplify things, remove support for the unused pinmux options, and convert the remaining option to a Boolean. This allows the pinmux to be chosen by the preprocessor, instead of having the code parse a string at runtime (for a build-time option!). Not only does this reduce code size, but it also allows this Kconfig option to be used in a table-driven DM pinctrl driver. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11configs: add PineTab defconfigArnaud Ferraris1-0/+5
The PineTab device-tree is already in u-boot, this commit adds the corresponding defconfig, based on pinephone_defconfig. Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-08image: Drop IMAGE_ENABLE_OF_LIBFDTSimon Glass1-1/+1
Add a host Kconfig for OF_LIBFDT. With this we can use CONFIG_IS_ENABLED(OF_LIBFDT) directly in the tools build, so drop the unnecessary indirection. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08board: dh_stm32mp1: Remove gpio_hog_probe_all() from boardPatrice Chotard1-3/+0
DM_GPIO_HOG flag has been replaced by GPIO_HOG flag since a while in commit 49b10cb49262 ("gpio: fixes for gpio-hog support"). And furthermore, gpio_hog_probe_all() is already called in board_r.c. So gpio_hog_probe() can be removed from stm32mp1.c. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-10-08board: stm32mp1: Remove gpio_hog_probe_all() from boardPatrice Chotard1-3/+0
DM_GPIO_HOG flag has been replaced by GPIO_HOG flag since a while in commit 49b10cb49262 ("gpio: fixes for gpio-hog support"). And furthermore, gpio_hog_probe_all() is already called in board_r.c. So gpio_hog_probe() can be removed from stm32mp1.c. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-10-08ARM: mvebu: x530: Remove custom kwbimage.cfgChris Packham1-12/+0
Commit ca1a4c863232 ("mvebu: select boot device at SoC level") made it unnecessary for the A385 boards to have their own kwbimage.cfg but as the x530 was in flight at the time it was added with it's own kwbimage.cfg. Remove the custom kwbimage.cfg as the SoC level file is suitable. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-08arm: mvebu: mvebu_armada-8k: drop Puzzle M801 early init codeRobert Marko1-19/+1
Since the CP1 pinctrl is not properly set in the DTS, there is no need for setting the pinctrl by writing hardcoded values to the MPP registers. So, drop the code relating to that. Fixes: 87c220d0 ("arm: mvebu: mvebu_armada-8k: Add support for initializing iEi Puzzle-M801 networking") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-08board: stm32: Remove the bi_boot_params initializationPatrick Delaunay10-20/+0
The stm32 platforms never had to support an ATAGs-based Linux Kernel, so remove the bi_boot_params initialization. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-07doc: boards: amlogic: update for Radxa ZeroChristian Hewitt1-0/+1
Add documentation bits for the Radxa Zero Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> [narmstrong: updated u200 MAINTAINERS] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07boards: amlogic: add Radxa Zero defconfigChristian Hewitt1-0/+1
Add a defconfig for the Radxa Zero SBC, using an Amlogic S905Y2 chip. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> [narmstrong: updated u200 MAINTAINERS & add missing CONFIG_SYS_LOAD_ADDR from defconfig] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07ARM: amlogic: add JetHub D1/H1 device supportVyacheslav Bocharov3-0/+82
Add support for new home automation devices. JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller with the following features: - DIN Rail Mounting case - Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz - no video out - 512Mb/1GB DDR3 - 8/16GB eMMC flash - 1 x USB 2.0 - 1 x 10/100Mbps ethernet - WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2. - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. - 2 x gpio LEDS - GPIO user Button - 1 x 1-Wire - 2 x RS-485 - 4 x dry contact digital GPIO inputs - 3 x relay GPIO outputs - DC source with a voltage of 9 to 56 V / Passive POE JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features: - Square plastic case - Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz - no video out - 1GB DDR3 - 8/16GB eMMC flash - 2 x USB 2.0 - 1 x 10/100Mbps ethernet - WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0. - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. - MicroSD 2.x/3.x/4.x DS/HS cards. - 1 x gpio LED - ADC user Button - DC source 5V microUSB with serial console Patches from: - JetHub H1 https://lore.kernel.org/r/20210915085715.1134940-4-adeep@lexina.in https://git.kernel.org/amlogic/c/abfaae24ecf3e7f00508b60fa05e2b6789b8f607 - JetHub D1 https://lore.kernel.org/r/20210915085715.1134940-5-adeep@lexina.in https://git.kernel.org/amlogic/c/8e279fb2903990cc6296ec56b3b80b2f854b6c79 Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: removed unused variable value] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07ARM: amlogic: add Banana Pi M5Neil Armstrong1-0/+1
Banana Pi BPI-M5 is a credit card format SBC with the following features: - Amlogic S905X3 quad core Cortex-A55 - Mali-G31 GPU - 4GB LPDDR4 - 16GB eMMC flash - 4 USB 3.0 - 1 GbE ethernet - HDMI output - 2x LEDS - SDCard - 2.5mm Jack with Stereo Audio + CVBS - Infrared Received - ADC Button - GPIO Button - 40 pins header + 3pins debug header [narmstrong: add missing CONFIG_SYS_LOAD_ADDR from defconfig] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07ARM: meson: add Beelink GS-King X boardNeil Armstrong1-0/+1
The Beelink GS-King X is a variant of the GS King boards but with an internal USB to SATA bridge and advanced audio features. [narmstrong: add missing CONFIG_SYS_LOAD_ADDR from defconfig] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07ARM: amlogic: add support for Odroid-HC4 deviceNeil Armstrong1-0/+1
The Odroid-HC4 is a variant of the Odroid-C4 board but with a PCIe-SATA bridge instead of the USB3 ports. [narmstrong: add missing CONFIG_SYS_LOAD_ADDR from defconfig] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-06nand.h: Cleanup linux/mtd/rawnand.h usageTom Rini5-0/+5
We only include <linux/mtd/rawnand.h> in <nand.h> for the forward declaration of struct nand_chip, so do that directly. Then, include <linux/mtd/rawnand.h> where required directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-05tee: add a stub for tee_find_devicePatrick Delaunay1-2/+1
Add stub for tee_find_device function when CONFIG_TEE is not activated to simplify the caller code. This patch allows to remove the CONFIG_IS_ENABLED(OPTEE) tests for stm32 platform. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Acked-by: Etienne Carriere <etienne.carriere@inaro.org> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-10-03board: siemens: Add support for SIMATIC IOT2050 devicesJan Kiszka5-0/+331
This adds support for the IOT2050 Basic and Advanced devices. The Basic used the dual-core AM6528 GP processor, the Advanced one the AM6548 HS quad-core version. Both variants are booted via a Siemens-provided FSBL that runs on the R5 cores. Consequently, U-Boot support is targeting the A53 cores. U-Boot SPL, ATF and TEE have to reside in SPI flash. Full integration into a bootable image can be found on https://github.com/siemens/meta-iot2050 Based on original board support by Le Jin, Gao Nian and Chao Zeng. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2021-10-02ppc: Remove MPC8349EMDS board and ARCH_MPC8349 supportTom Rini6-537/+0
This board has not been converted to CONFIG_DM by the deadline. Remove it. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-02arm: Remove bg0900 boardTom Rini5-272/+0
This board has not been converted to CONFIG_DM by the deadline. Remove it. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-02arm: Remove zmx25 board and ARCH_MX25Tom Rini5-302/+0
This board has not been converted to CONFIG_DM by the deadline. Remove it. As this is the last ARCH_MX25 platform, remove those references as well. Cc: Matthias Weisser <weisserm@arcor.de> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-01arm: Remove aspenite boardTom Rini4-74/+0
This board has not been converted to CONFIG_DM by the deadline. Remove it. As this is the last armada100 platform, remove that support as well. Cc: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-01arm: Remove flea3 boardTom Rini5-280/+0
This board has not been converted to CONFIG_DM by the deadline. Remove it. As this is the last mx35 platform, remove that support as well. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefano Babic <sbabic@denx.de>
2021-09-30Merge tag 'xilinx-for-v2022.01-rc1' of ↵Tom Rini3-0/+2088
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2022.01-rc1 zynq: - Enable capsule update for qspi and mmc - Update zed DT qspi compatible string zynqmp: - Add missing modeboot for EMMC - Add missing nand DT properties - List all eeproms for SC on vck190 - Add vck190 SC psu_init clk: - Handle only GATE type clock for Versal watchdog: - Update versal driver to handle system reset
2021-09-30WS cleanup: remove SPACE(s) followed by TABWolfgang Denk14-35/+35
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30WS cleanup: remove trailing white spaceWolfgang Denk3-5/+5
Signed-off-by: Wolfgang Denk <wd@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-09-30WS cleanup: remove excessive empty linesWolfgang Denk6-19/+0
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk50-59/+0
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-30arm64: zynqmp: Add psu_init_gpl for vck190/vmk180 SCMichal Simek1-0/+2052
Add psu_init_gpl file for getting SPL to work directly from the tree. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/6675723ad52d29982e62c6ca4832ed18688076cb.1632488774.git.michal.simek@xilinx.com
2021-09-30xilinx: zynqmp: Set modeboot env variable in eMMC bootmodeAshok Reddy Soma1-0/+1
Set environment variable modeboot to "emmcboot" in case of eMMC boot mode. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/c61231e4b8c6118862dfc82e923211637bf29991.1631688736.git.michal.simek@xilinx.com
2021-09-30ARM: zynq: Enable capsule update for qspi and mmcMichal Simek1-0/+35
Generate dfu_alt_info setup at runtime for capsule update. Enabling this feature will help with upgrading boards without remembering what is where. The similar change was done for ZynqMP by commit b86f43de0be0 ("xilinx: zynqmp: Add support for runtime dfu_alt_info setup"). Code needs to be enabled by CONFIG_SET_DFU_ALT_INFO. And also enable capsule on disk for RAW firmware images with efidebug command. Two indexes are supported for SPL flow. Images can be generated like: ./tools/mkeficapsule --raw spl/boot.bin --index 1 capsule1.bin ./tools/mkeficapsule --raw u-boot.img --index 2 capsule2.bin Then place them to SD card and load them: load mmc 0 10000000 capsule1.bin && efidebug capsule update -v 10000000 load mmc 0 10000000 capsule2.bin && efidebug capsule update -v 10000000 FSBL flow will also work where only index 1 capsule is used. There should be enough space for using boot.bin with bitstream too. Zynq also support multiple boot locations in SPI or MMC but it is not wired by this patch. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/bea5fc75a87a5971f118b46bab4aa7ca39a629c6.1630061610.git.michal.simek@xilinx.com
2021-09-29Merge branch 'network_master' of ↵Tom Rini27-77/+74
https://source.denx.de/u-boot/custodians/u-boot-net into next - Fix some non-NULL terminated strings in the networking subsystem - net: tsec: Mark tsec_get_interface as __maybe_unused
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-28 05:56:38 +0300