summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2007-06-06Merge with /home/stefan/git/u-boot/acadia-nand-bootStefan Roese6-4/+263
2007-06-06ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval boardStefan Roese6-4/+263
This patch adds NAND booting support for the AMCC Acadia eval board. Please make sure to configure jumper J7 to position 2-3 when booting from NOR, and to position 1-2 when booting for NAND. I also added a board command to configure the I2C bootstrap EEPROM values. Right now only 267MHz is support for booting either via NOR or NAND FLASH. Here the usage: => bootstrap 267 nor ;to configure the board for 267MHz NOR booting => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-05Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk8-115/+260
2007-06-01ppc4xx: Add missing file for Bamboo NAND booting supportStefan Roese1-0/+137
Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-01Merge with /home/stefan/git/u-boot/bamboo-nandStefan Roese6-109/+123
2007-06-01ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHzStefan Roese1-6/+0
This patch undoes the patch by Jeff Mann with commit-id ada4697d. As suggested by AMCC it is not recommended to dynamically change the EBC speed after bootup. So we undo this change to be on the safe side. Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-01ppc4xx: Update Sequoia NAND booting support with ECCStefan Roese1-0/+4
Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-01ppc4xx: Prepare Bamboo port for NAND booting supportStefan Roese5-109/+119
This patch updates the "normal" Bamboo NOR booting port, so that it is compatible with the coming soon NAND booting Bamboo port. It also enables the 2nd NAND flash on the Bamboo. Signed-off-by: Stefan Roese <sr@denx.de>
2007-05-31Merge with /home/wd/git/u-boot/stx-gp3ssaWolfgang Denk1-2/+1
2007-05-31Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.Wolfgang Denk1-2/+1
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-05-28Merge with /home/tur/git/u-boot#motionproWolfgang Denk1-5/+52
2007-05-27Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.Bartlomiej Sieka1-6/+6
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2007-05-27MPC5XXX, Motion-PRO: Fix PHY initialization problem.Bartlomiej Sieka1-1/+17
After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which networking does not function. This commit switches PHY to TX mode by clearing the FX_SEL bit of Mode Control Register. It also reverses commit 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround. Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> Acked-by: Bartlomiej Sieka <tur@semihalf.com>
2007-05-27Motion-PRO: Add displaying of CPLD revision information during boot.Bartlomiej Sieka1-1/+2
Signed-off-by: Jan Wrobel <wrr@semihalf.com> Acked-by: Bartlomiej Sieka <tur@semihalf.com>
2007-05-27Motion-PRO: Add LED support.Bartlomiej Sieka1-0/+30
Signed-off-by: Jan Wrobel <wrr@semihalf.com> Signed-off-by: Marian Balakowicz <m8@semihalf.com> Acked-by: Bartlomiej Sieka <tur@semihalf.com>
2007-05-24ppc4xx: Update AMCC Acadia support for board revision 1.1Stefan Roese1-1/+8
This patch updates the Acadia (405EZ) support for the new 1.1 board revision. It also adds support for NAND FLASH via the 4xx NDFC. Please note that the jumper J7 must be in position 2-3 for this NAND support. Position 1-2 is for NAND booting only. NAND booting support will follow later. Signed-off-by: Stefan Roese <sr@denx.de>
2007-05-18Merge with git://www.denx.de/git/u-boot.gitStefan Roese10-27/+488
2007-05-16[PATCH] Run new sequoia boards with an EBC speed of 83MHzJeffrey Mann1-2/+8
Because the Sequoia board does not boot with an EBC faster than 66MHz, the clock divider are changed after the initial boot process. This allows for maximum clocking speeds to be achieved on newer boards. Sequoia boards with 666.66 MHz processors require that the EBC divider be set to 3 in order to start the initial boot process at a slower EBC speed. After the initial boot process, the divider can be set back to 2, which will cause the boards to run at 83.333MHz. This is backward compatible with boards with 533.33 MHz processors, as these boards will already be set with an EBC divider of 2. Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
2007-05-16Merge with /home/wd/git/u-boot/custodian/u-boot-mpc83xxWolfgang Denk6-2/+424
2007-05-16Merge with /home/wd/git/u-boot/custodian/u-boot-microblazeWolfgang Denk3-25/+53
2007-05-15Merge with /home/tur/git/u-boot#motionproWolfgang Denk1-0/+11
2007-05-08[Motion-PRO] Enable Flat Device Tree support and modify default environmentBartlomiej Sieka1-0/+11
to allow booting of FDT-expecting kernels.
2007-05-08Merge git://www.denx.de/git/u-bootMichal Simek126-1501/+12270
Conflicts: include/asm-microblaze/microblaze_intc.h include/linux/stat.h
2007-05-08new: USE_MSR_INTR supportMichal Simek1-1/+2
2007-05-07new: fsl interrupt supportMichal Simek1-1/+21
FSL_Has_data is connected to INTC.
2007-05-07new: add writing to msr registerMichal Simek1-15/+19
2007-05-05new: FSL and MSR support #2Michal Simek1-0/+3
2007-05-05Coding stylke cleanup; update CHANGELOG.Wolfgang Denk1-13/+9
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-05-05Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk3-95/+10
2007-05-05Merge with /home/wd/git/u-boot/custodian/u-boot-mpc85xxWolfgang Denk22-46/+1743
2007-05-05Make "file" command happy with some config.mk files; update CHANGELOGWolfgang Denk2-0/+2
2007-05-05Merge with /home/wd/git/u-boot/custodian/u-boot-nand-flashWolfgang Denk2-6/+0
2007-05-05Merge with /home/wd/git/u-boot/custodian/u-boot-mpc86xxWolfgang Denk1-5/+5
2007-05-05Merge with git://www.denx.de/git/u-boot.gitStefan Roese5-0/+897
2007-05-05ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND bootingStefan Roese1-1/+9
Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big for the 4k NAND boot image so define bus_frequency to 133MHz here which is save for the refresh counter setup. Signed-off-by: Stefan Roese <sr@denx.de>
2007-05-05Merge with git://www.denx.de/git/u-boot.gitStefan Roese5-0/+897
2007-05-03Cleanup STX GP3SSA code; fix build and compile problems.Wolfgang Denk2-10/+14
2007-05-03Add support for STX GP3SSA (stxssa) BoardDan Malek5-0/+893
Signed-off-by Dan Malek, <dan@embeddedalley.com>
2007-05-03Cleaned up some 85xx PCI bugsAndy Fleming4-11/+20
* Cleaned up the CDS PCI Config Tables and added NULL entries to the end * Fixed PCIe LAWBAR assignemt to use the cpu-relative address * Fixed 85xx PCI code to assign powar region sizes based on the config values (rather than hard-coding them) * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-05-03Add support for the 8568 MDS boardAndy Fleming8-0/+979
This included some changes to common files: * Add 8568 processor SVR to various places * Add support for setting the qe bus-frequency value in the dts * Add the 8568MDS target to the Makefile Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-05-01Fix memory initialization on MPC8349E-mITXTimur Tabi1-2/+1
Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP. This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary on some ITX boards, notably those with a revision 3.1 CPU. Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Michael Benedict <MBenedict@twacs.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-04-29Merge with git://www.denx.de/git/u-boot.gitStefan Roese32-220/+2231
2007-04-29ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driverStefan Roese2-94/+1
Signed-off-by: Stefan Roese <sr@denx.de>
2007-04-24Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nGAndy Fleming1-1/+1
The other pagesz constants use one letter to specify order of magnitude. Also change the one reference to it in mpc8548cds/init.S Signed-off-by: Andy Fleming <afleming@freescale.com>
2007-04-24Add MPC8544DS basic port board files.Jon Loeliger5-0/+686
Add board port under new board/freescale directory structure and reuse existing PIXIS FPGA support there. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-04-24Fix PCI I/O space mapping on Freescale MPC85x0ADSSergei Shtylyov2-4/+4
The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's describing the local address window used for the PCI I/O space accesses -- fix this and carry over the necessary changes into the MPC8560ADS code since the PCI I/O space mapping was also broken for this board (by the earlier commit 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how the PCI I/O space must be mapped to all the MPC85xx board config. headers. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> board/mpc8540ads/init.S | 4 ++-- board/mpc8560ads/init.S | 4 ++-- include/configs/MPC8540ADS.h | 5 ++--- include/configs/MPC8541CDS.h | 2 +- include/configs/MPC8548CDS.h | 2 +- include/configs/MPC8560ADS.h | 8 ++++---- 6 files changed, 12 insertions(+), 13 deletions(-)
2007-04-24u-boot: Fix the 85xxcds tsec bugZang Roy-r619112-0/+2
Fix the 85xxcds tsec bug. When enable PCI, tsec.o should be added to u-boot.lds to make tsec work. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2007-04-24u-boot: Fix CPU2 errata on MPC8548CDS boardZang Roy-r619111-0/+7
This patch apply workaround of CPU2 errata on MPC8548CDS board. Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
2007-04-24u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS boardZang Roy-r619112-32/+46
Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2007-04-24mpc83xx: Add MPC8313ERDB support.Scott Wood5-0/+423
Signed-off-by: Scott Wood <scottwood@freescale.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-16 09:10:45 +0300