summaryrefslogtreecommitdiff
path: root/common
AgeCommit message (Collapse)AuthorFilesLines
2023-07-14bootstd: Add a separate log category for expoSimon Glass1-0/+1
This feature is different enough from bootstd that it probably deserves its own log category. It cannot use a uclass since it is not a device. Add a new category. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-07-07tpl: Kconfig: TPL_BANNER_PRINT depends on DEBUG_UART && TPL_SERIALYing Sun1-0/+1
As implemented in the arch/arm/mach-rockchip/tpl.c file, the CONFIG_TPL_BANNER_PRINT option will not work if either of these options is not enabled. Add dependency constraints to the CONFIG_TPL_BANNER_PRINT option definition to prevent configuration problems where option is enabled but do not take effect. Suggested-by: Yanjie Ren <renyanjie01@gmail.com> Signed-off-by: Ying Sun <sunying@nj.iscas.ac.cn>
2023-07-07common: Kconfig: SYS_CONSOLE_ENV_OVERWRITE depends on SYS_CONSOLE_IS_IN_ENVYing Sun1-0/+1
CONFIG_SYS_CONSOLE_ENV_OVERWRITE is implemented in common/console.c when "#if CONFIG_IS_ENABLED(SYS_CONSOLE_IS_IN_ENV)" is met. It is recommended to add dependency constraints to its definition. Suggested-by: Yanjie Ren <renyanjie01@gmail.com> Signed-off-by: Ying Sun <sunying@nj.iscas.ac.cn>
2023-07-06RISC-V: CONFIG_SPL_OPENSBI_SCRATCH_OPTIONS descriptionHeinrich Schuchardt1-2/+4
Describe which numeric values can be used for as scratch options for OpenSBI. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Anup Patel <anup@brainfault.org>
2023-07-05Merge tag 'v2023.07-rc6' into nextTom Rini4-10/+23
Prepare v2023.07-rc6
2023-07-03spl: spl_legacy: Fix spl_end addressFabio Estevam1-1/+1
Currently, spl_end points to the __bss_end address, which is an external RAM address instead of the end of the SPL text section in the internal RAM. This causes boot failures on imx6-colibri, for example: ``` Trying to boot from MMC1 SPL: Image overlaps SPL resetting ... ``` Fix this problem by assigning spl_end to _image_binary_end, as this symbol properly represents the end of the SPL text section. From u-boot-spl.map: .end *(.__end) 0x00000000009121a4 _image_binary_end = . Fixes: 77aed22b48ab ("spl: spl_legacy: Add extra address checks") Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Fabio Estevam <festevam@denx.de> Tested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> # DH i.MX6Q DHCOM PDK2
2023-06-24imx: hab: Simplify the mechanismMarek Vasut1-7/+0
The current mechanism is unnecessarily complex. Simplify the whole mechanism such that the entire fitImage is signed, IVT is placed at the end, followed by CSF, and this entire bundle is also authenticated. This makes the signing scripting far simpler. Signed-off-by: Marek Vasut <marex@denx.de>
2023-06-24spl: spl_legacy: Add extra address checksMarek Vasut1-0/+20
Check whether the loaded image or entry point does not overlap SPL. Signed-off-by: Marek Vasut <marex@denx.de>
2023-06-23menu: Re-enable the ANSI codesSimon Glass1-1/+1
The intent here was to allow ANSI codes to be disabled, since it was proving impoosible to test operation of the menu code when it kept moving the cursor. Unfortunately this ended up in the patch. Correct this by enabling ANSI again. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Pali Rohár <pali@kernel.org> Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl> Reported-by: Frank Wunderlich <frank-w@public-files.de> Fixes: 32bab0eae51b ("menu: Make use of CLI character processing") Tested-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
2023-06-21common/memsize.c: Fix get_ram_size() when cache is enabledEmanuele Ghidoli1-0/+24
Ensure that every write is flushed to memory and afterward reads are from memory. Since the algorithm rely on the fact that accessing to not existent memory lead to write at addr / 2 without this modification accesses to aliased (not physically present) addresses are cached and wrong size is returned. This was discovered while working on a TI AM625 based board where cache is normally enabled, see commit c02712a74849 ("arm: mach-k3: Enable dcache in SPL"). Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2023-06-21stdio: Remove stdio_init()Masahiro Yamada1-8/+0
This function is not used by anyone. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-06-20spl: spl-nor: return error if no valid image was loadedMario Kicherer1-1/+1
If only FIT images are enabled and loading the FIT image fails, spl_nor_load_image() should return an error instead of zero. Without this patch: >>SPL: board_init_r() spl_init Trying to boot from NOR Unsupported OS image.. Jumping nevertheless.. image entry point: 0x0 With patch: >>SPL: board_init_r() spl_init Trying to boot from NOR SPL: failed to boot from all boot devices (err=-6) .### ERROR ### Please RESET the board ### Signed-off-by: Mario Kicherer <dev@kicherer.org>
2023-06-20common: spl: Add spl NVMe boot supportMayuresh Chitale2-0/+33
Add support to load the next stage image from an NVMe disk which may be formatted as an EXT or FAT filesystem. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> [trini: Drop hunk changing disk/part.c as that breaks other users] Signed-off-by: Tom Rini <trini@konsulko.com>
2023-06-20spl: blk: Support loading images from fsMayuresh Chitale3-0/+136
Add a generic API to support loading of SPL payload from any supported filesystem on a given partition of a block device. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
2023-06-20spl: Add Kconfig options for NVMEMayuresh Chitale1-0/+26
Add kconfig options to enable NVME and PCI NVMe support in SPL Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-06-16fdt_support: add fdt_copy_fixed_partitions functionPatrick Delaunay1-0/+73
Add a new function fdt_copy_fixed_partitions to copy the fixed partition nodes from U-Boot device tree to Linux kernel device tree and to dynamically configure the MTD partitions. This function fdt_copy_fixed_partitions is only based on device tree with livetree compatible function and replace the function fdt_fixup_mtdparts based on mtdparts variable. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16fdt_support: include dm/ofnode.hPatrick Delaunay1-1/+1
This patch is a preliminary patch to use ofnode function is fdt_support to read the U-Boot device tree with livetree compatible functions. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-06-14spl: ext: Use partition size for mountMayuresh Chitale1-2/+2
Since commit 9905cae65e03 ("fs: ext4: check the minimal partition size to mount"), a valid size needs to be provided when mounting an ext filesystem. Fix the spl ext driver to use the parition size instead of 0 when mounting the filesystem. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
2023-06-12Merge tag 'xilinx-for-v2023.10-rc1' of ↵Tom Rini2-2/+2
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2023.10-rc1 global: - Use proper U-Boot project name Fix sparse warnings in zynqmp-clk, zynqmp handoff, board cmd: - Cover incorrect 0 length entries Versal NET: - Add bootmode logic - Support SPP production version - Add loadpdi command ZynqMP: - Clear pmufw node command ID handling - Change power domain behavior around zynqmp_pmufw_node() - Fix zynqmp cmd return values and pmufw command - Fix R5 tcm init and modes mmc: - Sync Versal NET emmc DT binding pcie: - Add support for ZynqMP PCIe root port video: - Add support for ZynqMP DP tools: - Fix debug message in relocate-rela
2023-06-12Merge tag v2023.07-rc4 into nextTom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-06-12global: Use proper project name U-BootMichal Simek2-2/+2
Use proper project name in comments, Kconfig, readmes. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/0dbdf0432405c1c38ffca55703b6737a48219e79.1684307818.git.michal.simek@amd.com
2023-06-01cli: avoid buffer overrunHeinrich Schuchardt1-1/+1
Invoking the sandbox with /u-boot -c ⧵0xef⧵0xbf⧵0xbd results in a segmentation fault. Function b_getch() retrieves a character from the input stream. This character may be > 0x7f. If type char is signed, static_get() will return a negative number and in parse_stream() we will use that negative number as an index for array map[] resulting in a buffer overflow. Reported-by: Harry Lockyer <harry_lockyer@tutanota.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-06-01spl: Correct checking of configuration nodeBin Meng1-1/+1
Per the fit_conf_get_node() API doc, it returns configuration node offset when found (>=0). Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-17usb: Move SPL_USB_GADGET and related Kconfig symbols to drivers/usb/Marek Vasut1-63/+0
To avoid piling up all the various Kconfig symbols in one place, i.e. common/spl/Kconfig, move the USB Kconfig symbols into drivers/usb/ . This commit moves SPL_USB_GADGET and related symbols. Fix typo and rename SPL_USB_GADGET to "USB Gadget Support in SPL" . Update the gadget Makefile to match the symbol changes. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-05-17usb: Move SPL_USB_STORAGE Kconfig symbol to drivers/usb/Marek Vasut1-17/+0
To avoid piling up all the various Kconfig symbols in one place, i.e. common/spl/Kconfig, move the USB Kconfig symbols into drivers/usb/ . This commit moves SPL_USB_STORAGE and matching SYS_USB_FAT_BOOT_PARTITION . Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-05-17usb: Move SPL_USB_HOST Kconfig symbol to drivers/usb/Marek Vasut1-10/+0
To avoid piling up all the various Kconfig symbols in one place, i.e. common/spl/Kconfig, move the USB Kconfig symbols into drivers/usb/ . This commit moves SPL_USB_HOST and updates help text of both USB_HOST and SPL_USB_HOST . Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-05-13usb: Tidy up the usb_start flagSimon Glass1-1/+1
This should be declared in a header file so that type-checking works correctly. Add a single declaration to usb.h and remove the others. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-05-08common: spl: spl: Remove video driver before u-boot properNikhil M Jain1-0/+15
Add method to remove video driver before loading u-boot proper. When bootstage changes from SPL to u-boot proper, noo method is called to remove video driver, and at u-boot proper if video driver is not enabled, the video driver starts displaying garbage on the screen, because there is no reserved space for video and the frame buffer gets u-boot proper data written. Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
2023-05-05Merge tag 'video-for-v2023.07-rc2' of ↵Tom Rini4-10/+174
https://source.denx.de/u-boot/custodians/u-boot-video - enable video support in SPL - support splash screen for TI am62x - replace #ifdef and #if with if's in bmp/splash - add lm3533 backlight driver - add Solomon SSD2825 DSI/LVDS bridge driver - add Renesas R61307 and R69328 MIPI DSI panel drivers - add tegra DC based PWM backlight driver - add generic endeavoru (HTC One X) panel driver
2023-05-04common/Kconfig: fix comments syntax errorHugo Villeneuve1-1/+1
Fix comments error in EVENT_DEBUG description: this get usefui -> this to get useful Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-04common: cli_hush: Restore clear local variable supportStefan Herbrechtsmeier1-1/+7
The u-boot hush shell doesn’t support the unset command to clear a variable and therefore an empty value ("c=") should be a valid value for the set_local_var function to clear the variable. This partial reverts commit aa722529635c ("common: cli_hush: avoid dead code") and only checks for a `=` in the string. Additionally explicit call the unset_local_var function to remove the variable if the value is empty. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-02imx: support i.MX8QM DMSSE20 a1 boardOliver Graute1-1/+1
Add i.MX8QM DMSSE20 a1 board support U-Boot 2023.04-00030-g7be2f547b2 (Apr 21 2023 - 11:11:43 +0200) Model: Advantech iMX8QM DMSSE20 Board: DMS-SE20A1 8GB Build: SCFW 549b1e18, SECO-FW c9de51c0, ATF 5782363 Boot: USB DRAM: 8 GiB Core: 100 devices, 19 uclasses, devicetree: separate MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: eth0: ethernet@5b040000 Warning: ethernet@5b050000 (eth1) using random MAC address - 32:05:0c:f9:5e:10 , eth1: ethernet@5b050000 Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2023-04-28fdt_support: fix comments syntax errorHugo Villeneuve1-2/+2
Fix comments syntax error in fdt_node_offset_by_compat_reg() description: compatiable -> compatible Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-28common: static fdt_simplefb_enable_existing_node()Heinrich Schuchardt1-1/+7
Function fdt_simplefb_enable_existing_node() should be static as it is not used outside common/fdt_simplefb.c. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-27ide: Drop init for not using BLKSimon Glass1-12/+0
ALl boards use CONFIG_BLK now so this code is not used. Drop it and the header-file #ifdef Signed-off-by: Simon Glass <sjg@chromium.org>
2023-04-27ide: Drop CONFIG_START_IDESimon Glass1-5/+0
This is not used by any board. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-04-24common: Replace #ifdef and #if with if'sNikhil M Jain2-16/+12
Avoid using preprocessor compilation directives and instead use simple logical expressions for better readability since compiler will anyway optimize out the respective code block if condition is not satisfied. Signed-off-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
2023-04-24common: Enable splash functions at SPLNikhil M Jain2-10/+10
To support splash screen at both u-boot proper and SPL use CONFIG_IS_ENABLED and CONFIG_VAL to check for video related Kconfigs at respective stages. Replace CONFIG_CMD_BMP with CONFIG_BMP to enable splash_display function at u-boot proper and SPL. Signed-off-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Devarsh Thakkar <devarsht@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-24common: Makefile: Rule to compile bmp.cNikhil M Jain1-0/+1
Add rule to compile bmp.c at SPL and u-boot proper when CONFIG_SPL_BMP and CONFIG_BMP are defined. Signed-off-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Devarsh Thakkar <devarsht@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2023-04-24cmd: bmp: Split bmp commands and functionsNikhil M Jain1-0/+153
To enable splash screen at SPL, need to compile cmd/bmp.c which also includes bmp commands, since SPL doesn't use commands split bmp.c into common/bmp.c which includes all bmp functions and cmd/bmp.c which only contains bmp commands. Add function delclaration for bmp_info in video.h. Signed-off-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-24common: Kconfig: Add BMP configsNikhil M Jain1-0/+12
Add CONFIG_BMP and CONFIG_SPL_BMP which enable displaying bmp images at u-boot proper and SPL. Signed-off-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
2023-04-24common: Makefile: Add rule to compile splash and splash_source at SPLNikhil M Jain1-0/+2
To enable splash screen and loading bmp from boot media, add rules to compile splash.c and splash_source.c at SPL stage only when CONFIG_SPL_SPLASH_SCREEN and CONFIG_SPL_SPLASH_SOURCE are defined. Signed-off-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Devarsh Thakkar <devarsht@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-15arch: m68k: Introduce trivial PIT based timerMarek Vasut1-1/+1
The QEMU emulation of m68k does not support DMA timer, the only timer that is supported is the PIT timer. Implement trivial PIT timer support for m68k. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-04-10mmc: Use EXT_CSD_EXTRACT_BOOT_PART() macro for extracting boot partPali Rohár1-1/+1
Mask macro PART_ACCESS_MASK filter out access bits of emmc register and macro EXT_CSD_EXTRACT_BOOT_PART() extracts boot part bits of emmc register. So use EXT_CSD_EXTRACT_BOOT_PART() when extracting boot partition. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-07ARM: rmobile: Add R-Car Generation 4 supportHai Pham1-1/+1
This adds R-Car Generation 4 (Gen4) support as Renesas ARM64 SoC. In this version, reusing R-Car Gen3 lowlevel initialize routine [1] and R-Car Gen3 memory map tables [2] . [1] arch/arm/mach-rmobile/lowlevel_init_gen3.S [2] arch/arm/mach-rmobile/memmap-gen3.c Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: - Enable DTO support by default - Sort the Kconfig lists - Select RCAR_64 Kconfig option to pull in all the shared Kconfig options with Gen3, and use where applicable to deduplicate entries. - Fix reference [2] typo in commit message - Drop config options moved to Kconfig, rename rest to CFG_ accordingly to synchronize with upstream changes. Drop removed CONFIG_VERY_BIG_RAM. - Move board size limit to arch/Kconfig - Move GICR_BASE to headers instead of common config]
2023-04-03Merge branch 'next'Tom Rini9-30/+104
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-30cli: run_commandf(): small fixupsEvgeny Bachinin1-6/+19
* vsnprintf() can truncate cmd, hence it makes no sense to launch such command (it's broken). Moreover, it's better to signalize to the caller about such case (for facilitating debugging or bug hunting). * Fix kernel-doc warnings: include/command.h:264: info: Scanning doc for run_commandf include/command.h:268: warning: contents before sections include/command.h:271: warning: No description found for return value of 'run_commandf' * Add printf-like format attribute to validate at compile-time the format string against parameters's type. * Fix compilation error in case of -Wall, -Werror, -Wextra: error: variable ‘i’ set but not used [-Werror=unused-but-set-variable] * Drop extra ret variable. Signed-off-by: Evgeny Bachinin <EABachinin@sberdevices.ru> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-28cli: Correct handling of invalid escape sequences in cread_line()Simon Glass1-2/+1
The second call to cli_ch_process() is in the wrong place, meaning that the one of the characters of an invalid escape sequence is swallowed instead of being returned. Fix the bug and add a test to cover this. This behaviour matches that of the code before cli_getch() was introduced. This was verified on the commit before b08e9d4b66 i.e.: 7d850f85aad ("sandbox: Enable mmc command and legacy images") Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-03-28cli: Correct several bugs in cli_getch()Simon Glass1-2/+3
This function does not behave as expected when unknown escape sequences are sent to it: - it fails to store (and thus echo) the last character of the invalid sequence - it fails to set esc_len to 0 when it finishes emitting the invalid sequence, meaning that the following character will appear to be part of a new escape sequence - it processes the first character of the rejected sequence as a valid character, just starting the sequence all over again The last two bugs conspire to produce an "impossible condition #876" message which is the main symptom of this behaviour. Fix these bugs and add a test to verify the behaviour. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-03-22dlmalloc: Fix a warning with clang-15Tom Rini1-4/+4
With clang-15 we now will get warnings such as: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] And it is easy enough to address this warning here, as we aren't concerned with re-syncing with an upstream. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-10 15:35:52 +0300