summaryrefslogtreecommitdiff
path: root/common
AgeCommit message (Collapse)AuthorFilesLines
2021-09-08common/spl: Drop [ST]PL_HASH_SUPPORT in favor of [ST]PL_HASHAlexandru Gagniuc3-26/+3
All of these configs exist. Stick to using CONFIG_[ST]PL_HASH, and drop all references to CONFIG_[ST]PL_HASH_SUPPORT. This means we need for CHAIN_OF_TRUST to select SPL_HASH now. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [trini: Add TPL case, fix CHAIN_OF_TRUST, other tweaks] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-08common: Remove unused CONFIG_FIT_SHAxxx selectorsAlexandru Gagniuc2-70/+1
Originally CONFIG_FIT_SHAxxx enabled specific SHA algos for and only for hash_calculate() in common/image-fit.c. However, since commit 14f061dcb1 ("image: Drop IMAGE_ENABLE_SHAxxx"), the correct selector was changed to CONFIG_SHAxxx. The extra "_FIT_" variants are neither used, nor needed. Remove them. One defconfig disables FIT_SHA256, which is now changed to 'SHA256'. CMD_MVEBU_BUBT needs to select select SHA256 to avoid undefined references to "sha256_*()". bubt.c needs sha256, so this selection is correct. It is not clear why this problem did not manifest before. Note that SHA selection in SPL is broken for this exact reason. There is no corresponding SPL_SHAxxx. Fixing this is is beyond the scope of this change. Also note that we make CONFIG_FIT now imply SHA256, to make up for FIT_SHA256 previously being a default y option. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [trini: Add imply SHA256 to FIT] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-07common: board_r: support enable_caches for RISC-VZong Li1-2/+2
The enable_caches is a generic hook for architecture-implemented, we leverage this function to enable caches for RISC-V Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-09-04net: Move network rules to drivers/netSimon Glass1-0/+2
The code under drivers/net is related to ethernet networking drivers, in some fashion or another. Drop these from the top-level Makefile and also move the phy rule into drivers/net/Makefile which is where it belongs. Make the new rule for drivers/net check for the build-stage relevant ETH symbol. Fix up some Kconfig dependencies while we're here to mirror how the Makefile logic now works. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Introduce ETH, Kconfig dependency changes, am43xx fix] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-04net: Rename SPL_NET_SUPPORT to SPL_NETSimon Glass3-7/+7
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04power: Refactor Makefile rulesSimon Glass1-0/+13
Move the power/ rules into drivers/power to avoid clutter in the Makefile and drivers/Makefile files. We must select SPL_POWER if SPL_POWER_DOMAIN is used, since the two are currently independent and boards do not necessarily enable SPL_POWER. Add a TPL_POWER as well, as that is used by one board. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-09-04sata: Rename SATA_SUPPORT to SATASimon Glass2-4/+4
Rename this options so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04ppc: Rename MPC8XXX_INIT_DDR_SUPPORT to MPC8XXX_INIT_DDRSimon Glass1-3/+3
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04Rename CACHE_SUPPORT to CACHESimon Glass1-7/+1
Rename this option so that CONFIG_IS_ENABLED can be used with it. Oddly there is already an SPL_CACHE option. Drop it in favour of this one. Drop the special SPL Makefile rule which is now superfluous. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04spi: Rename SPI_SUPPORT to SPISimon Glass1-5/+5
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04serial: Rename SERIAL_SUPPORT to SERIALSimon Glass3-10/+10
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04rtc: Rename RTC_SUPPORT to RTCSimon Glass1-2/+2
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04pch: Rename PCH_SUPPORT to PCHSimon Glass1-2/+2
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04mmc: Rename MMC_SUPPORT to MMCSimon Glass2-7/+7
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: Fixup some incorrect renames] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-03xyz-modem: Allow to cancel transfer also by CTRL+CPali Rohár1-0/+2
Currently it is possible to cancel loadx and loady commands by pressing CTRL+X (CAN character) at least 3 times quickly. All other U-Boot commands, including loadb and loads can be cancelled by CTRL+C. So allow it also in xyz-modem code used by loadx and loady commands. Implement it by handling CTRL+C (ETX character) in the same way as CTRL+X (CAN character). Due to how x/y-modem protocol works, it is required to press CTRL+C or CTRL+X at least 3 times quickly. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-09-03xyz-modem: Put xyzModem_stream_close debug diagnostic message into ZM_DEBUG()Pali Rohár1-2/+2
This is how all other debug / diagnostic messages are handled. Signed-off-by: Pali Rohár <pali@kernel.org>
2021-09-03xyz-modem: Fix x-modem "xyzModem_eof error" at the end of filePali Rohár1-0/+2
In x-modem protocol EOF is not an error state at the end of file. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-09-03xyz-modem: Fix crash after cancelling transferPali Rohár1-2/+2
Variable xyz.len is set to -1 on error. At the end xyzModem_stream_read() function calls memcpy() with length from variable xyz.len. If this variable is set to -1 then value passed to memcpy is casted to unsigned value, which means to copy whole address space. Which then cause U-Boot crash. E.g. on arm64 it cause CPU crash: "Synchronous Abort" handler, esr 0x96000006 Fix this issue by checking that value stored in xyz.len is valid prior trying to use it. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-09-02fit: Use DM hash driver if supportedChia-Wei Wang1-0/+30
Calculate hash using DM driver if supported. For backward compatibility, the call to legacy hash functions is reserved. Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
2021-09-01Kconfig: Remove all default n/no optionsMichal Simek3-23/+0
default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-01Convert CONFIG_RAMBOOT_PBL et al to KconfigTom Rini1-0/+20
This converts the following to Kconfig: CONFIG_RAMBOOT_PBL CONFIG_SYS_FSL_PBL_PBI CONFIG_SYS_FSL_PBL_RCW Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini2-3/+3
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_ID_EEPROM to KconfigTom Rini2-1/+7
This converts the following to Kconfig: CONFIG_ID_EEPROM Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-27Merge tag 'xilinx-for-v2021.10-rc3' of ↵Tom Rini1-0/+18
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.10-rc3 xilinx: - Disable CONFIG_ARCH_FIXUP_FDT_MEMORY - Print information about cpu via soc drivers and enable DISPLAY_CPUINFO - Wire infrastructure for DTB_RESELECT and MULTI_DTB_FIT zynq: - Wire single QSPI - Use power-source instead of io-standard properties - Enable nor on zc770-xm012 zynqmp: - Change handling around multi_boot() - Setup offset for u-boot.itb in spi - Generate run time dfu_alt_info for capsule update - Use explicit values for enums (zynqmp_firmware.h) - Enable RTC/SHA1/BUTTON/BUTTON_GPIO command - Disable WDT driver by default - Bind usb/scsi via preboot because of EFI - DT updates/fixes - Add soc driver - Fix SPL SPI boot mode versal: - Add soc driver sdhci: - Update tap delay programming for zynq_sdhci driver cmd: - Fix RTC uclass handling in date command - Update pwm help message - Update reset help message watchdog: - Fix wwdt compilation rtc: - Deal with seq alias in rtc uclass - Add zynqmp RTC driver fdt: - Add kernel-doc for fdt_fixup_memory_banks()
2021-08-26fdt_support: Add kernel-doc for fdt_fixup_memory_banks()Michal Simek1-0/+18
Add kernel-doc description for fdt_fixup_memory_banks() because it is implemented in one specific way and this information should be available for others to decide if their SoC conforms to it. If you don't want U-Boot to update your memory DT layout please disable CONFIG_ARCH_FIXUP_FDT_MEMORY. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-16Kconfig: FIT_SIGNATURE should not select RSA_VERIFYAlexandru Gagniuc1-4/+4
FIT signatures can now be implemented with ECDSA. The assumption that all FIT images are signed with RSA is no longer valid. Thus, instead of 'select'ing RSA, only 'imply' it. This doesn't change the defaults, but allows one to explicitly disable RSA support. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-08-04fit: Fix verification of images with external dataJohn Keeping1-1/+7
The "-E" option to mkimage generates a FIT with external data using the data-size and data-offset properties which must both be ignored when verifying a signature. Add "data-offset" to the list of excluded properties for signature verification; since the line is now too long, re-format the list to one-per-line and make it static since the data is constant. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-02global: Convert simple_strtoul() with decimal to dectoul()Simon Glass2-3/+3
It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02global: Convert simple_strtoul() with hex to hextoul()Simon Glass12-27/+26
It is a pain to have to specify the value 16 in each call. Add a new hextoul() function and update the code to use it. Add a proper comment to simple_strtoul() while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02hash: Ensure verification hex pairs are terminatedSimon Glass1-1/+1
This function seems to assume that the chr[] variable contains zeros at the start, which is not always true. Use strlcpy() to be safe. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-01sandbox: Reduce keyed autoboot delaySimon Glass1-3/+3
The autoboot tests are a recent addition to U-Boot, providing much-needed coverage in this area. A side effect of the keyed autoboot test is that this feature is enabled in sandbox always. This changes the autoboot prompt and confuses the pytests. Some tests become slower, for example the vboot tests take about 27s now instead of 3s. We don't actually need this feature enabled to be able to run the tests. Add a switch to allow sandbox to turn it on and off as needed. Use this in the one test that needs it. Add a command-line flag in case this is desired in normal use. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 25c8b9f298e ("test: add first autoboot unit tests") Reviewed-by: Steffen Jaeckel <jaeckel-floss@eyet-services.de>
2021-08-01common: board_r: print error if binman_init failsTim Harvey1-1/+7
Display an error if binman_init fails. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-31arm: mvebu: Load U-Boot proper binary in SPL code based on kwbimage headerPali Rohár1-1/+3
Now that proper load and execution addresses are set in v1 kwbimage we can use it for loading and booting U-Boot proper. Use the new spl_parse_board_header() function to implement parsing the kwbimage v1 header. Use information from this header to locate offset and size of the U-Boot proper binary, instead of using the legacy U-Boot header which is prepended to the U-Boot proper binary stored at fixed offset. This has the advantage that we do not need to relay on legacy U-Boot header anymore and therefore U-Boot proper binary can be stored at any offset, as is the case when loading & booting U-Boot proper by BootROM. The CONFIG_SYS_U_BOOT_OFFS option is therefore not used by SPL code anymore. Also allow to compile U-Boot SPL without CONFIG_SPL_SPI_FLASH_SUPPORT, CONFIG_SPL_MMC_SUPPORT or CONFIG_SPL_SATA_SUPPORT set. In this case BootROM is used for loading and executing U-Boot proper. This reduces the size of U-Boot's SPL image. By default these config options are enabled and so BootROM loading is not used. In some cases BootROM reads from SPI NOR at lower speed than U-Boot SPL. So people can decide whether they want to have smaller SPL binary at the cost of slower boot. Therefore dependency on CONFIG_SPL_DM_SPI, CONFIG_SPL_SPI_FLASH_SUPPORT, CONFIG_SPL_SPI_LOAD, CONFIG_SPL_SPI_SUPPORT, CONFIG_SPL_DM_GPIO, CONFIG_SPL_DM_MMC, CONFIG_SPL_GPIO_SUPPORT, CONFIG_SPL_LIBDISK_SUPPORT, CONFIG_SPL_MMC_SUPPORT, CONFIG_SPL_SATA_SUPPORT and CONFIG_SPL_LIBDISK_SUPPORT is changed from strict to related "imply" (which can be selectivelly turned off and causes booting via BootROM). Options CONFIG_SYS_SPI_U_BOOT_OFFS, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR and CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET have to to be set to zero as they define the location where kwbimage header starts. It is the location where BootROM expects start of the kwbimage from which it reads, parses and executes SPL part. The same applies to option CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR, which has to be set to one. Update all config files to set correct values of these options and set CONFIG_SYS_U_BOOT_OFFS to the correct value - the offset where U-Boot proper starts. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31SPL: Add support for parsing board / BootROM specific image typesPali Rohár1-0/+9
Platform specific BootROM may use its own image type for loading SPL or U-Boot proper. In some cases it makes sense to not use BootROM supplied code for booting U-Boot proper but rather to use U-Boot SPL for this, e.g. when U-Boot SPL can load U-Boot proper faster than BootROM. In this case it is required for platform board code to parse and load U-Boot in BootROM specific image type. This change adds support for parsing platform / board / BootROM specific image types via weak function spl_parse_board_header() which is called before marking boot image as a raw. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-31SPL: Add support for specifying offset between header and imagePali Rohár3-3/+27
Some image types (e.g. kwbimage v1) store the offset to SPL binary and offset to U-Boot proper binary in their headers. To avoid reading SPL binary when loading U-Boot proper, add support for specifying offset in struct spl_image_info, which defines the offset from the beginning of the header and the beginning of the executable data. Initial support is added only for SPI, MMC and SATA code. We can extend it later if needed. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-28i2c: Rename SPL/TPL_I2C_SUPPORT to I2CSimon Glass1-3/+3
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-28i2c: Rename CONFIG_SYS_I2C to CONFIG_SYS_I2C_LEGACYSimon Glass2-3/+3
It is quite confusing that CONFIG_SYS_I2C selects the legacy I2C and CONFIG_DM_I2C selects the current I2C. The deadline to migrate I2C is less than a year away. Also we want to have a CONFIG_I2C for U-Boot proper just like we have CONFIG_SPL_I2C for SPL, so we can simplify the Makefile rules. Rename this symbol so it is clear it is going away. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-28Rename DRIVERS_MISC_SUPPORT to DRIVERS_MISCSimon Glass1-2/+2
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename GPIO_SUPPORT to GPIOSimon Glass1-2/+2
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_USB_HOST_SUPPORT to SPL_USB_HOSTSimon Glass2-3/+3
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_WATCHDOG_SUPPORT to SPL_WATCHDOGSimon Glass2-2/+2
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_MUSB_NEW_SUPPORT to SPL_MUSB_NEWSimon Glass1-1/+1
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_ETH_SUPPORT to SPL_ETHSimon Glass2-5/+5
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_CRYPTO_SUPPORT to SPL_CRYPTOSimon Glass2-2/+2
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_POWER_SUPPORT to SPL_POWERSimon Glass1-1/+1
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-27spl: Introduce spl_board_prepare_for_optee() hookAlexandru Gagniuc1-0/+5
OP-TEE requires some particular setup, which is not needed for linux or other payloads. Add a hook for platform-specific code to perform any OP-TEE related configuration and initialization. A weak function is used because it is symmetrical to other spl_board_prepare_for_*() implementations. A solution to avoid the use of weak functions would trivially apply to all these implementations. However, re-designing this is beyond the scope of this patch. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-07-27spl: mmc: Support OP-TEE payloads in Falcon modeAlexandru Gagniuc1-2/+2
In general, Falcon mode means we're booting a linux kernel directly. With FIT images, however, an OP-TEE secure kernel can be booted before linux. Thus, if the next stage is an IH_OS_TEE, this isn't necessarily a problem. Of course, a general solution would involve mmc_load_image_raw_os() only loading the binary, and leaving the decision of suitability to someone else. However, a rework of the boot flow is beyond the scope of this patch. Accept IH_OS_TEE as a valid OS value. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-07-23test: add first autoboot unit testsSteffen Jaeckel2-1/+6
This adds tests for the crypt-based and plain SHA256-based password hashing algorithms in the autoboot flow. Signed-off-by: Steffen Jaeckel <jaeckel-floss@eyet-services.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-23common: add support to fallback to plain SHA256Steffen Jaeckel2-1/+29
In case crypt-based hashing is enabled this will be the default mechanism that is used. If a user wants to have support for both, the environment variable `bootstopusesha256` can be set to `true` to allow plain SHA256 based hashing of the password. Signed-off-by: Steffen Jaeckel <jaeckel-floss@eyet-services.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-23common: add AUTOBOOT_FLUSH_STDIN optionSteffen Jaeckel2-0/+20
The key-sequence based unlock mechanisms are sensitive to junk symbols that could have been sent to stdin and are still waiting to be retrieved. Enabling this option will read all symbols off stdin before displaying the autoboot prompt (and starting to read the password from stdin). Signed-off-by: Steffen Jaeckel <jaeckel-floss@eyet-services.de> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-15 19:36:36 +0300