summaryrefslogtreecommitdiff
path: root/configs/am335x_evm_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2020-07-28configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOOTP_DNS2 to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_BOOTP_DNS2 CONFIG_BOOTP_PXE_CLIENTARCH Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28Convert CONFIG_PHYLIB et al to KconfigTom Rini1-0/+2
This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_BITBANGMII CONFIG_MV88E6352_SWITCH CONFIG_MV88E61XX_SWITCH CONFIG_PHYLIB_10G CONFIG_PHY_AQUANTIA CONFIG_PHY_ATHEROS CONFIG_PHY_BROADCOM CONFIG_PHY_CORTINA CONFIG_PHY_DAVICOM CONFIG_PHY_ET1011C CONFIG_PHY_LXT CONFIG_PHY_MARVELL CONFIG_PHY_MICREL CONFIG_PHY_NATSEMI CONFIG_PHY_REALTEK CONFIG_RTL8211X_PHY_FORCE_MASTER CONFIG_PHY_SMSC CONFIG_PHY_TERANETICS CONFIG_PHY_TI CONFIG_PHY_VITESSE CONFIG_PHY_XILINX Signed-off-by: Tom Rini <trini@konsulko.com>
2020-03-03configs: am335x_evm: Enable FastbootSam Protsenko1-0/+3
This config option was present in am335x_boneblack_defconfig, but we have to use generic am335x_evm_defconfig now, as BBB defconfig was removed in commit 8fa7f65dd02c ("configs: Remove am335x_boneblack_defconfig"). So this patch merely brings that option back. Tested on BeagleBone Black: => fastboot 0 $ fastboot flash rootfs rootfs.img Fixes: 8fa7f65dd02c ("configs: Remove am335x_boneblack_defconfig") Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
2020-03-03configs: am335x_evm: Enable DFU over TFTP supportSam Protsenko1-0/+1
DFU over TFTP flashing method might be helpful in order to speed-up the flashing process of big images (as DFU works over USB EP0, which is quite slow). Also, it's a good backup option in the case when USB got broken (either in software or hardware), to avoid resorting to SD card boot. This config option was present in am335x_boneblack_defconfig, but we have to use generic am335x_evm_defconfig now, as BBB defconfig was removed in commit 8fa7f65dd02c ("configs: Remove am335x_boneblack_defconfig"). So this patch merely brings that option back. Tested on BeagleBone Black: => setenv dfu_alt_info $dfu_alt_info_emmc => setenv ipaddr 192.168.0.100 => setenv serverip 192.168.0.1 => setenv updatefile update_uboot.itb => dfu tftp mmc 1 Where 'update_uboot.its' file looks like this: /dts-v1/; / { description = "Automatic U-Boot update"; #address-cells = <1>; images { u-boot.img.raw-1 { description = "U-Boot binary"; data = /incbin/("u-boot.img"); compression = "none"; type = "firmware"; load = <0x60000>; hash-1 { algo = "sha1"; }; }; }; }; And 'update_uboot.itb' is generated as follows: $ mkimage -f update_uboot.its update_uboot.itb Newly flashed U-Boot works fine. Fixes: 8fa7f65dd02c ("configs: Remove am335x_boneblack_defconfig") Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
2019-12-05configs: Resync with savedefconfigTom Rini1-2/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04mtd: ensure MTD is compiled when CMD_MTDPARTS is selectedMiquel Raynal1-0/+1
MTD support must be enabled when using mtdparts. Indeed, functions like get_mtd_info(), get_mtd_device() and put_mtd_device() are in drivers/mtd/mtd_uboot.c and are built only with CONFIG_MTD. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04mtd: ensure MTD/the raw NAND core are compiled when there is a NAND flashMiquel Raynal1-0/+1
Both symbols must be enabled when there is a raw NAND driver selected. Also enable them when CONFIG_CMD_NAND is selected to avoid breaking things when we'll further rework the MTD dependency description. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Rebase and migrate a few more boards here] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NANDMiquel Raynal1-1/+1
Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-11-20env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbolTom Rini1-0/+1
Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-08configs: Resync with savedefconfigTom Rini1-3/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-11board: ti: am335x-ice: Configure the CDCE913 clock synthesizerTero Kristo1-0/+2
AM335x-ICE boards contain the CDCE913 clock synthesizer, and their reset crystal capacitance load value of 10pF is wrong leading into lost packets in certain networking tests. Add DT data for this device, and probe it from the board file to program the crystal capacitance load value to 0pF to avoid any problems. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-08-26Convert CONFIG_ARCH_CPU_INIT to KconfigAdam Ford1-0/+1
This converts the following to Kconfig: CONFIG_ARCH_CPU_INIT Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Felix Brack <fb@ltec.ch>
2019-08-14configs: Resync with savedefconfigTom Rini1-3/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-12watchdog: omap_wdt: Disable DM watchdog support in SPLSuniel Mahesh1-0/+1
This patch disables DM watchdog support for SPL builds and uses the legacy omap watchdog driver on TI AM335x chipsets. The following build error is reported if DM watchdog support was enabled in SPL: CC spl/drivers/usb/gadget/rndis.o LD spl/drivers/usb/gadget/built-in.o LD spl/drivers/usb/musb-new/built-in.o LD spl/drivers/built-in.o LD spl/u-boot-spl arm-linux-ld.bfd: u-boot-spl section .u_boot_list will not fit in region .sram arm-linux-ld.bfd: region .sram overflowed by 440 bytes make[1]: *** [spl/u-boot-spl] Error 1 make: *** [spl/u-boot-spl] Error 2 Adjusted WATCHDOG_RESET macro accordingly. Earlier it was pointing to hw_watchdog_reset. Since CONFIG_WATCHDOG replaces CONFIG_HW_WATCHDOG, now WATCHDOG_RESET macro points to watchdog_reset. This watchdog_reset is not defined anywhere for am33xx/omap2 and needs to be defined. Fixed this by simply calling hw_watchdog_reset in watchdog_reset. Built and tested on AM335x device (BeagleboneBlack), compile tested for all other AM33xx/omap2 based boards. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org> [trini: Fix watchdog.h logic] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-12watchdog: omap_wdt: Convert watchdog driver to use DT and DMSuniel Mahesh1-0/+2
This patch adds device tree and driver model watchdog support, converts the legacy omap watchdog driver to driver model for TI AM335x chipsets. The following compile warning is removed: ===================== WARNING ====================== This board does not use CONFIG_WDT (DM watchdog support). Please update the board to use CONFIG_WDT before the v2019.10 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== CONFIG_HW_WATCHDOG is no more a default option for AM33XX devices after DT/DM conversion, adjusted kconfig accordingly. DM watchdog support is enabled by default in SPL. The SPL image doesn't fit into SRAM because of size constraints and build breaks with an overflow. For this reason DM watchdog support should be disabled in SPL, driver code should be adjusted accordingly to serve this purpose. Built and tested on AM335x device (BeagleboneBlack), compile tested for all other AM33xx based boards. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-05-05configs: am335x_evm: enable SPL_FIT_IMAGE_TINYJean-Jacques Hiblot1-0/+1
The size of the SPL for the am335x_evm is constrained. There is no need to have advanced SPL FIT features, so keep the SPL FIT support tiny. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-05-03ti: Add am335x-pocketbeagle to am335x_evm_defconfig.Vagrant Cascadian1-1/+1
Add am335x-pocketbeagle to CONFIG_OF_LIST in am335x_evm_defconfig. Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-19usb: Select USB_MUSB_DSPS with USB_MUSB_TIAlex Kiernan1-1/+0
USB_MUSB_TI requires USB_MUSB_DSPS, failing at link time if it's not selected: drivers/usb/musb-new/built-in.o: In function `ti_musb_host_ofdata_to_platdata': drivers/usb/musb-new/ti-musb.c:193: undefined reference to `musb_dsps_ops' or if OF_CONTROL is not selected: arch/arm/mach-omap2/built-in.o:(.data.usb0+0x24): undefined reference to `musb_dsps_ops' Reviewed-by: Hannes Schmelzer <oe5hpm@oevsv.at> Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at> Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2019-04-12configs: am335x_evm: Update VCI StringFaiz Abbas1-1/+1
Update VCI string to keep it compatible with legacy test setups. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-12configs: am335x_evm: Add Support for SPL_ETHFaiz Abbas1-0/+1
Add Support for booting from Ethernet. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12configs: am335x_evm: Reduce size of SPLFaiz Abbas1-1/+4
Make some room in SPL by getting rid of unnecessary configs. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-03-26Convert CONFIG_SF_DEFAULT_* to KconfigPatrick Delaunay1-0/+1
This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-22configs: am335x_evm: Add CONFIG_BLKFaiz Abbas1-1/+0
With DM_MMC and DM_USB enabled, enable CONFIG_BLK. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-02-01spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4Tien Fong Chee1-1/+1
Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPLY_FS_EXT4 so both obj-$(CONFIG_$(SPL_)FS_EXT4) and CONFIG_IS_ENABLED(FS_EXT4) can be used to control the build in both SPL and U-Boot. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01configs: am335x_evm: enable DM_USB_GADGET and USB_ETHER in u-boot and SPLJean-Jacques Hiblot1-1/+7
The AM335x ROM boot is able to download the SPL from a RNDIS connection on USB0. To enable a full RNDIS boot flow (romboot -> SPL -> u-boot -> ..), we can use USB_ETHER in SPL and u-boot. However this increase the size of the SPL past its limit. So removing the unused SPL_EXT_SUPPORT. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-18configs: am335x_evm: Enable DM_SPI and DM_SPI_FLASHVignesh R1-0/+2
Enable DM_SPI and DM_SPI_FLASH for actively used defconfigs for am335x_evm. Signed-off-by: Vignesh R <vigneshr@ti.com>
2019-01-08configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-26usb: am335x_evm: Disable CONFIG_SPL_DM_USBSven Schwermer1-1/+2
This configuration doesn't use USB in the SPL, so we need to disable driver model for USB in the SPL. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
2018-11-14configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-26configs: am335x_evm: enable OF_BOARD_SETUPSekhar Nori1-0/+1
Enable CONFIG_OF_BOARD_SETUP as it is needed for Beaglebone black to overwrite the Ethernet phy address present in DT in case the phy latches on to a different address. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-09-03configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-17Convert CONFIG_MII et al to KconfigAdam Ford1-0/+1
This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-06-04configs: Resync with savedefconfigTom Rini1-2/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-30fastboot: Move fastboot to drivers/fastbootAlex Kiernan1-1/+1
Separate CMD_FASTBOOT from FASTBOOT and move code and configuration to drivers/fastboot. Switch dependencies on FASTBOOT to USB_FUNCTION_FASTBOOT as anyone who wants FASTBOOT before this series wants USB_FUNCTION_FASTBOOT. Split USB_FUNCTION_FASTBOOT from FASTBOOT so they retain their existing behaviour. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-27Convert CONFIG_SPI to KconfigAdam Ford1-0/+1
This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-17configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-17part: Disable CONFIG_SPL_ISO_PARTITION by defaultAlexander Graf1-1/+0
We enabled CONFIG_ISO_PARTITION by default for distro boot, so that U-Boot could load distro images that usually get shipped as iso images. These images usually come with a board agnostic boot environment. However, there is very little point in having ISO support enabled (for anyone really) in SPL, as the whole idea of SPL is to load U-Boot proper which again is board specific. So the fact that we enable ISO support in U-Boot proper does not mean at all that we want ISO support in U-Boot SPL. Hence, let's remove the Kconfig dependency. Along the way, let's also clean up all those default configs that disabled SPL ISO support. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-09Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to KconfigAlex Kiernan1-0/+1
Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Petr Vorel <petr.vorel at gmail.com>
2018-04-09Migrate CONFIG_DRIVER_TI_CPSW to KconfigAlex Kiernan1-1/+1
This converts CONFIG_DRIVER_TI_CPSW to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-08configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-22configs: am335x_evm: Increase SPL_SYS_MALLOC_F_LEN to accomodate gpio_devicesFaiz Abbas1-0/+1
With gpio devices getting created in SPL, the size of the heap is no longer sufficient. Therefore, increase SPL_SYS_MALLOC_F_LEN to 0x1000. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-02-15Convert CONFIG_BOOTCOUNT_LIMIT to KconfigLukasz Majewski1-0/+1
This converts the following to Kconfig: CONFIG_BOOTCOUNT_LIMIT Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Acked-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2018-02-14configs: am335x_evm: Add DYNAMIC_CRC_TABLEFaiz Abbas1-0/+1
Add CONFIG_DYNAMIC_CRC_TABLE to am335x_evm_defconfig to reduce the size of the image. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2018-02-14configs: am335x_evm: Disable ISO and EFI partitions in SPLFaiz Abbas1-0/+2
ISO and EFI partition configs in SPL are selected by default. However, they are not being used. Therefore, remove ISO and EFI partition support in SPL. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-23Convert CONFIG_USB_MUSB_OMAP2PLUS et al to KconfigAdam Ford1-0/+1
This converts the following to Kconfig: CONFIG_USB_MUSB_OMAP2PLUS CONFIG_USB_MUSB_AM35X CONFIG_USB_MUSB_DSPS CONFIG_USB_MUSB_PIO_ONLY Signed-off-by: Adam Ford <aford173@gmail.com>
2017-12-19configs: Resync with savedefconfigTom Rini1-2/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-11-18Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMANDTom Rini1-0/+1
We first introduce CONFIG_USE_BOOTCOMMAND, similar to CONFIG_USE_BOOTARGS. We then migrate CONFIG_BOOTCOMMAND for most CONFIG_DISTRO_DEFAULT users. In some cases platforms have a complex scheme around this usage, and these have been defered for the moment so that platform maintainers can work on a migration plan. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2017-11-05Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULTTom Rini1-0/+2
We move all instances of CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT from the header files to the defconfig files. There's a few cases here where we need to expand upon what was in the header file. Tested-by: Adam Ford <aford173@gmail.com> #omap3_logic Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-20Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to KconfigAdam Ford1-0/+1
This converts the following to Kconfig: CONFIG_NAND_MXC CONFIG_NAND_OMAP_GPMC CONFIG_NAND_OMAP_GPMC_PREFETCH CONFIG_NAND_OMAP_ELM CONFIG_SPL_NAND_AM33XX_BCH CONFIG_SPL_NAND_SIMPLE CONFIG_SYS_NAND_BUSWIDTH_16BIT Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Finish migration of CONFIG_SPL_NAND_SIMPLE, fix some build issues, add CONFIG_NAND_MXC so we can do CONFIG_SYS_NAND_BUSWIDTH_16BIT] Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-29 16:50:02 +0300