summaryrefslogtreecommitdiff
path: root/configs/am335x_evm_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2023-02-06am335x_evm_defconfig: Enable CONFIG_CMD_EXTENSIONMatwey V. Kornilov1-3/+3
am335x_evm_defconfig is used for BeagleBone Black, popular single board computer with wide extension support. Enable CONFIG_CMD_EXTENSION by default since extension detection is already implemented for am335x. Also run make savedefconfig for am335x_evm_defconfig Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
2022-12-06Convert CONFIG_POWER_LTC3676 et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_POWER_FSL CONFIG_POWER_FSL_MC13892 CONFIG_POWER_HI6553 CONFIG_POWER_LTC3676 CONFIG_POWER_PFUZE100 CONFIG_POWER_PFUZE3000 CONFIG_POWER_SPI CONFIG_POWER_TPS65090_EC CONFIG_POWER_TPS65218 CONFIG_POWER_TPS65910 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-02am335x-evm: Support STMicro/Micron SPI flashPaul Barker1-0/+1
This change enables access to the SPI flash on the SanCloud BBE Lite board. Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2022-08-23configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-25board: ti: am335x: Use correct dtbs for SanCloud boardsPaul Barker1-1/+1
We have different dtbs for the Lite and Extended WiFi variants of the SanCloud BBE. Signed-off-by: Paul Barker <paul.barker@sancloud.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_SYS_BOOTM_LEN to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_BOOTM_LEN As part of this, rework error handling in boot/bootm.c so that we pass the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not be available to host tools but we do know the size that we passed to malloc(). Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_SYS_BOOTCOUNT_LE et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_BOOTCOUNT_LE CONFIG_SYS_BOOTCOUNT_BE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR et al to KconfigTom Rini1-0/+2
This converts the following to Kconfig: CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_NAND_SPL_KERNEL_OFFS to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_NAND_SPL_KERNEL_OFFS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to KconfigTom Rini1-0/+2
This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini1-0/+2
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_FS_LOAD_PAYLOAD_NAME et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FS_LOAD_KERNEL_NAME CONFIG_SPL_FS_LOAD_PAYLOAD_NAME Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-05power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217Lukasz Majewski1-0/+3
Up till now the CONFIG_POWER_TPS65217 has been defined in several header files for am335x SoC. This patch renames it to CONFIG_PMIC_TPS65217, which better reflects the role of this IC circuit. Moreover, new CONFIG_PMIC_TPS65217 has been introduced in Kconfig to be used with boards, which both support DM_PMIC and DM_I2C. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: Migrate all other platforms as well] Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_CLOCK_SYNTHESIZER to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_CLOCK_SYNTHESIZER Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_AM335X_USB0 et al to KconfigTom Rini1-0/+3
This converts the following to Kconfig: CONFIG_AM335X_USB0 CONFIG_AM335X_USB0_MODE CONFIG_AM335X_USB1 CONFIG_AM335X_USB1_MODE We do this by introducing specific options for static configuration of USB0/USB1 in SPL rather than defining CONFIG_AM335X_USBx_MODE to the enum value being used. Furthermore, with how the code is used now we do not need to have OTG mode exposed as an option here, so remove that. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_NET_RETRY_COUNT to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_NET_RETRY_COUNT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-21spl: Convert SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to KconfigAlexandru Gagniuc1-0/+2
Falcon mode is very useful in improving boot speed. A question that Falcon mode asks is "Where do I look for the kernel". With MMC boot media, the correct answer is CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR. The scope of this patch is to move this to Kconfig. It is possible for a system to support Falcon mode from NOR but not MMC. In that case, mmc_load_image_raw_os() would not be used. To address this, conditionally compile mmc_load_image_raw_os() when SPL_FALCON_BOOT_MMCSD, instead of SPL_OS_BOOT. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Move spl_start_uboot to its own guard in spl_mmc.c, rerun migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-21Convert CONFIG_TIMESTAMP to KconfigSimon Glass1-0/+1
This converts the following to Kconfig: CONFIG_TIMESTAMP Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-19configs: am335x_evm: enable CONFIG_CLK_TI_CTRLAmjad Ouled-Ameur1-0/+1
This enables the clock controller driver support on TI's SoCs. This will fix this GPIO issue at boot time: request_and_set_gpio: Unable to request GPIO_PR1_MII_CTRL request_and_set_gpio: Unable to request GPIO_MUX_MII_CTRL request_and_set_gpio: Unable to request GPIO_FET_SWITCH_CTRL request_and_set_gpio: Unable to request GPIO_PHY_RESET This issue comes from the fact that the clock controller is not probed. Enable the TI's clock controller driver support to solve this. Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2021-10-06Convert CONFIG_SYS_NAND_U_BOOT_LOCATIONS et al to KconfigTom Rini1-0/+2
This converts the following to Kconfig: CONFIG_SYS_NAND_U_BOOT_LOCATIONS CONFIG_SYS_NAND_U_BOOT_OFFS Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06Convert CONFIG_SYS_NAND_ONFI_DETECTION to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_NAND_ONFI_DETECTION Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06Convert CONFIG_SYS_NAND_PAGE_COUNT to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_NAND_PAGE_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06Convert CONFIG_SPL_NAND_LOAD et al to KconfigTom Rini1-0/+3
This converts the following to Kconfig: CONFIG_SPL_NAND_LOAD CONFIG_SYS_NAND_BLOCK_SIZE CONFIG_SYS_NAND_PAGE_SIZE CONFIG_SYS_NAND_OOBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-04net: Rename SPL_NET_SUPPORT to SPL_NETSimon Glass1-1/+1
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-30Convert CONFIG_SYS_I2C_EEPROM_ADDR et al to KconfigTom Rini1-0/+2
- Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR based on current usage. - Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS to Kconfig. We move these symbols around a bit and add appropriate dependencies to them. In some cases, we now add a correct default value as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-29Merge tag 'ti-v2021.10-rc2' of ↵Tom Rini1-1/+2
https://source.denx.de/u-boot/custodians/u-boot-ti - Add MMC High speed modes for AM64 and J7200 - Add Sierra/Torrent SERDES driver - Minor clean-ups for R5F boot from SPL
2021-07-28Rename SPL_MUSB_NEW_SUPPORT to SPL_MUSB_NEWSimon Glass1-1/+1
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_ETH_SUPPORT to SPL_ETHSimon Glass1-1/+1
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-27configs: am335x_evm: Support GbE PHYsPaul Barker1-0/+1
The SanCloud BeagleBone Enhanced (BBE) includes a Gigabit Ethernet PHY. Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2021-07-27arm: dts: Import am335x-sancloud-bbe devicetreePaul Barker1-1/+1
This device tree is imported from Linux 5.13.1 and enabled via the am335x board file and the am335x evm defconfig. Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2021-07-27configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-15ti: am335x_evm: Switch to DISTRO_BOOT onlyTom Rini1-1/+1
Remove the environment support for various legacy boot methods. With this, we will now default to booting any distribution that follows the generic distro boot framework and no longer attempt to boot various legacy (to this SoC) scripts/etc. Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210610230147.22475-1-trini@konsulko.com
2021-06-28configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-11configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-27configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-04configs: am335x_evm: enable CONFIG_SPL_ALLOC_BDDario Binacchi1-0/+1
With commit 38d6b7ebdaee ("spl: Drop bd_info in the data section") you need to enable this option to boot from mmc. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-10-12Merge tag 'ti-v2021.01-rc1' of ↵Tom Rini1-1/+0
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Minor cleanup on K3 env variables - Fix OSPI compatible for J721e - Drop unused property in omap-usb2-phy - Update Maintainer for am335x-guardian board.
2020-10-12configs: am335x_evm_defconfig: Enable CONFIG_OF_LIBFDT_OVERLAYVignesh Raghavendra1-1/+0
This enables applying DTBOs at U-Boot prompt before booting to kernel. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-10-09configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-29Makefile: Allow CONFIG_SPL_FIT_GENERATOR to be emptySimon Glass1-0/+1
At present we use the empty string to indicate that there is no FIT generator, but this doesn't allow an individual board to undefine it. Create a separate bool instead. Update the config of the boards which currently have an empty string. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-28Convert CONFIG_BOOTP_SEND_HOSTNAME to KconfigAdam Ford1-0/+1
This converts the following to Kconfig: CONFIG_BOOTP_SEND_HOSTNAME Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_SPL_NAND_BASE et al to KconfigAdam Ford1-0/+1
This converts the following to Kconfig: CONFIG_SPL_NAND_BASE CONFIG_SPL_NAND_IDENT Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_SPL_NAND_DRIVERS et al to KconfigAdam Ford1-0/+2
This converts the following to Kconfig: CONFIG_SPL_NAND_DRIVERS CONFIG_SPL_NAND_ECC CONFIG_SPL_NAND_SIMPLE Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_ENV_OVERWRITE to KconfigAdam Ford1-0/+1
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOOTP_DNS2 to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_BOOTP_DNS2 CONFIG_BOOTP_PXE_CLIENTARCH Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28Convert CONFIG_PHYLIB et al to KconfigTom Rini1-0/+2
This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_BITBANGMII CONFIG_MV88E6352_SWITCH CONFIG_MV88E61XX_SWITCH CONFIG_PHYLIB_10G CONFIG_PHY_AQUANTIA CONFIG_PHY_ATHEROS CONFIG_PHY_BROADCOM CONFIG_PHY_CORTINA CONFIG_PHY_DAVICOM CONFIG_PHY_ET1011C CONFIG_PHY_LXT CONFIG_PHY_MARVELL CONFIG_PHY_MICREL CONFIG_PHY_NATSEMI CONFIG_PHY_REALTEK CONFIG_RTL8211X_PHY_FORCE_MASTER CONFIG_PHY_SMSC CONFIG_PHY_TERANETICS CONFIG_PHY_TI CONFIG_PHY_VITESSE CONFIG_PHY_XILINX Signed-off-by: Tom Rini <trini@konsulko.com>
2020-03-03configs: am335x_evm: Enable FastbootSam Protsenko1-0/+3
This config option was present in am335x_boneblack_defconfig, but we have to use generic am335x_evm_defconfig now, as BBB defconfig was removed in commit 8fa7f65dd02c ("configs: Remove am335x_boneblack_defconfig"). So this patch merely brings that option back. Tested on BeagleBone Black: => fastboot 0 $ fastboot flash rootfs rootfs.img Fixes: 8fa7f65dd02c ("configs: Remove am335x_boneblack_defconfig") Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
2020-03-03configs: am335x_evm: Enable DFU over TFTP supportSam Protsenko1-0/+1
DFU over TFTP flashing method might be helpful in order to speed-up the flashing process of big images (as DFU works over USB EP0, which is quite slow). Also, it's a good backup option in the case when USB got broken (either in software or hardware), to avoid resorting to SD card boot. This config option was present in am335x_boneblack_defconfig, but we have to use generic am335x_evm_defconfig now, as BBB defconfig was removed in commit 8fa7f65dd02c ("configs: Remove am335x_boneblack_defconfig"). So this patch merely brings that option back. Tested on BeagleBone Black: => setenv dfu_alt_info $dfu_alt_info_emmc => setenv ipaddr 192.168.0.100 => setenv serverip 192.168.0.1 => setenv updatefile update_uboot.itb => dfu tftp mmc 1 Where 'update_uboot.its' file looks like this: /dts-v1/; / { description = "Automatic U-Boot update"; #address-cells = <1>; images { u-boot.img.raw-1 { description = "U-Boot binary"; data = /incbin/("u-boot.img"); compression = "none"; type = "firmware"; load = <0x60000>; hash-1 { algo = "sha1"; }; }; }; }; And 'update_uboot.itb' is generated as follows: $ mkimage -f update_uboot.its update_uboot.itb Newly flashed U-Boot works fine. Fixes: 8fa7f65dd02c ("configs: Remove am335x_boneblack_defconfig") Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-24 12:17:02 +0300