summaryrefslogtreecommitdiff
path: root/configs/am65x_evm_a53_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2020-08-11configs: am65x_evm_a53: Enable USB Mass storage and DFU boot modesFaiz Abbas1-0/+10
Enable configs to facilitate booting from USB Mass Storage devices as well as USB peripheral boot Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-10configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-08Convert CONFIG_SYS_MMC_ENV_DEV et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-29Makefile: Allow CONFIG_SPL_FIT_GENERATOR to be emptySimon Glass1-0/+1
At present we use the empty string to indicate that there is no FIT generator, but this doesn't allow an individual board to undefine it. Create a separate bool instead. Update the config of the boards which currently have an empty string. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-28Convert CONFIG_ENV_OVERWRITE to KconfigAdam Ford1-0/+1
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28configs: Resync with savedefconfigTom Rini1-3/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-25configs: am65x_evm: Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3Dave Gerlach1-0/+2
Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3 so the TI K3 SoC driver can be used for SoC detection. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-24Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"Tom Rini1-2/+0
This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-20configs: am65x_evm: Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3Dave Gerlach1-0/+2
Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3 so the TI K3 SoC driver can be used for SoC detection. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-06Merge branch 'next'Tom Rini1-2/+4
Merge all outstanding changes from the current next branch in now that we have released.
2020-07-06configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-29spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*Lukasz Majewski1-0/+1
This change allows more fine tuning of driver model based SPI support in SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI support in SPL and TPL via Kconfig option. Before this change it was necessary to use: /* SPI Flash Configs */ #if defined(CONFIG_SPL_BUILD) #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH #undef CONFIG_SPI_FLASH_MTD #endif in the ./include/configs/<board>.h, which is error prone and shall be avoided when we strive to switch to Kconfig. The goal of this patch: Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL). Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must still support non DM driver. Another use case is the conversion of non DM/DTS SPI driver to support DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the distinction is needed in Kconfig (also if SPL version of the driver supports OF_PLATDATA). In the end of the day one would have to support following use cases (in single driver file - e.g. mxs_spi.c): - U-Boot proper driver supporting DT/DTS - U-Boot proper driver without DT/DTS support (deprecated) - SPL driver without DT/DTS support - SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to run full blown DT/DTS) - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained environment with no fitImage and OF_LIBFDT support). Some boards do require SPI support (with DM) in SPL (TPL) and some only have DM_SPI{_FLASH} defined to allow compiling SPL. This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [trini: Fixup a few platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26spi: Enable missing CONFIG_SPL_DM_SPI supportTom Rini1-0/+1
Due to how the Makefile logic is we currently get DM_SPI support in SPL enabled by having DM_SPI enabled for full U-Boot but not having CONFIG_SPL_DM_SPI set. Add this missing option to boards that were inadvertently making use of it. Cc: Adam Ford <aford173@gmail.com> Cc: Akash Gajjar <akash@openedev.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Chee Hong Ang <chee.hong.ang@intel.com> Cc: Chin-Liang See <clsee@altera.com> Cc: Dalon Westergreen <dwesterg@gmail.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Cc: Heiko Schocher <hs@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Klaus Goger <klaus.goger@theobroma-systems.com> Cc: Levin Du <djw@t-chip.com.cn> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Marek Vasut <marex@denx.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Looijmans <mike.looijmans@topic.nl> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pavel Machek <pavel@denx.de> Cc: Peter Robinson <pbrobinson@gmail.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Cc: Suniel Mahesh <sunil@amarulasolutions.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Wolfgang Grandegger <wg@aries-embedded.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2020-06-12net: phy: Add support for TI PHY initDan Murphy1-1/+1
ti_phy_init function was allocated to the DP83867 PHY. This function name is to generic for a specific PHY. The function can be moved to a TI specific file that can register all TI PHYs that are defined in the defconfig. The ti_phy_init file will contain all TI PHYs initialization so that only phy_ti_init can be called from the framework. In addition to the above the config flag for the DP83867 needs to be changed in the Kconfig and dependent defconfig files. The config flag that was used for the DP83867 was also generic in nature so a more specific config flag for the DP83867 was created. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Dan Murphy <dmurphy@ti.com>
2020-04-28configs: Resync with savedefconfigTom Rini1-4/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-03-17Merge tag 'ti-v2020.07-next' of ↵Tom Rini1-0/+25
https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next K3 J721E: * OSPI boot support * Support for loading remote cores in R5 SPL * PMIC ESM Support * Minor fixes for R5F and C7x remoteproc drivers K3 AM654: * Update AVS class 0 voltages. * Add I2C nodes DRA7xx/AM57xx: * Fixed Android boot on AM57xx AM33/AM43/Davinci: * switch to driver model for the net and mdio driver for baltos * Add DM/DTS support for omap video driver * Enable fastboot on am335x-evm
2020-03-09configs: am65x_evm: Add CONFIG_SUPPORT_EMMC_BOOTFaiz Abbas1-0/+1
With CONFIG_SUPPORT_EMMC_BOOT moved to Kconfig, move it to defconfig files. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-03configs: am65x_evm_defconfig: Enable OSPI configsVignesh Raghavendra1-0/+25
Enable OSPI related defconfigs. Also enable SPL_DMA so that DMA is used during OSPI boot Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-28configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22configs: Resync with savedefconfigTom Rini1-5/+3
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-20configs: am65x_evm: Enable USB keyboard as second stdinVignesh Raghavendra1-0/+3
Enable USB keyboard to be used as input device at U-Boot prompt. Both serial and USB keyboard will be active inputs simultaneously. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20am65x_evm_a53_defconfig: Enable configs to support USB and DFUVignesh Raghavendra1-0/+19
Enable configs related to USB Host mode, Peripheral mode and DFU. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: am65x_evm: Add Support for ADMAFaiz Abbas1-0/+2
Add Support for ADMA in a53 and r5 defconfigs. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-12-05configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-21env: Finish migration of common ENV optionsTom Rini1-0/+3
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbolTom Rini1-0/+1
Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-12defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENTTom Rini1-0/+1
Move this symbol to Kconfig. As part of this we can drop a UBI-specific symbol that was a stop-gap for not having this particular symbol in Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-12configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-11configs: am65x_evm_a53: Enable DISPLAY_CPUINFOLokesh Vutla1-1/+0
Enable CONFIG_DISPLAY_CPUINFO so that cpuinfo is printed during boot. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11configs: am65x_evm_a53: Disable PSCI_RESETLokesh Vutla1-0/+1
AM65x uses TISCI protocol to reset the device and does not support PSCI reset. So disable PSCI reset. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11configs: am65x_evm_a53: Enhance bootcmd to start remoteprocsSuman Anna1-1/+1
The A53 U-boot can support early booting of the MCU R5F remote processor(s) from U-boot prompt to achieve various system usecases before booting the Linux kernel. Update the default BOOTCOMMAND to provide an automatic and easier way to start the MCU R5F cores through added environment variables. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11configs: am65x_evm_a53: Enable R5F remoteproc driverSuman Anna1-0/+2
Enable the R5F remoteproc driver for the AM65x GP EVM so that the MCU domain R5F cores can be booted from A53 U-boot. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-09-23configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-14configs: Resync with savedefconfigTom Rini1-2/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-12configs: am65x_evm_a53: enable support for PCIe ethernet cardsSekhar Nori1-1/+3
Enable support for Intel E1000 based PCIe ethernet cards that can be used to test PCIe RC functionality on AM65x EVM. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-12configs: am65x_evm_a53: enable PCIe supportSekhar Nori1-0/+6
Enable support for PCIe and related configurations on AM654 EVM platform. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-07-31configs: am65x_evm_a53: Disable K3_SYSTEM_CONTROLLERSuman Anna1-3/+0
The K3 System Controller driver is used for loading and starting the System Firmware, and is used only on R5 SPL. It need not be enabled and built for the A53 U-Boot and SPL, so disable it from both the GP and HS AM65x A53 defconfigs. While at this, also remove the unneeded CONFIG_SPL_REMOTEPROC and CONFIG_CMD_REMOTEPROC as no remoteprocs are now loaded from A53 SPL. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-27remoteproc: k3_rproc: Rename to ti_k3_arm64_rprocLokesh Vutla1-1/+0
k3_rproc driver is specifically meant for controlling an arm64 core using TISCI protocol. So rename the driver, Kconfig symbol, compatible and functions accordingly. While at it drop this remoteproc selection for a53 defconfig. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17configs: am65x_evm: Add support for applying overlaysAndreas Dannenberg1-1/+2
This will allow for downloading and applying overlays from an MMC/SD boot media based on the overlay_files ENV variable containing a list of overlay files. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17configs: am65x_evm_a53: Increase malloc pool before relocationAndreas Dannenberg1-1/+1
The malloc pool used before relocation is getting tight leading to out of memory errors doing certain DM-related calls. Since we are running the A53 SPL out of DDR let's just go ahead and bump its size as used in U-Boot proper as well as SPL (via Kconfig default value) from 8KB to 32KB. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17configs: am65x_evm_a53: Enable PCA953X-type GPIO driverAndreas Dannenberg1-0/+2
Enable GPIO driver for PCA953X-compatible I2C-based I/O expander which includes support for the TCA9554/PCA9554-type expander found on the AM654 EVM base board. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17configs: am65x_evm_defconfig: Enable I2C supportAndreas Dannenberg1-0/+4
Enable I2C via driver model as well as the associated set of U-Boot commands to allow us interacting with various I2C slave devices. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17configs: am65x_evm: Add Support for eMMC bootFaiz Abbas1-0/+2
Add configs to support RAW boot mode in eMMC. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-17configs: am65x_evm_a53: Add Support for creating GPT partitionsFaiz Abbas1-1/+1
Add Support for creating GPT partitions in U-boot. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-17configs: am65x: Add configs to support environment in eMMCFaiz Abbas1-3/+2
Add configs such that U-boot environment is in eMMC by default. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-17configs: am65x_evm: Enable CONFIG_REGMAPFaiz Abbas1-0/+2
Add Support for CONFIG_REGMAP. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17arm64: dts: k3: Sync sdhci0 node from kernel and change driver nameFaiz Abbas1-1/+1
Sync the sdhci0 node from kernel. This changes the compatible that is required to be there in the driver. Change the same for the SD card node which is not yet supported in kernel. This also syncs the main_pmx0 node as a side effect. Also change the name of the driver to match the compatible in kernel. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-15configs: am65x_evm_a53: enable networkingGrygorii Strashko1-0/+6
Enable TI K3 AM65x CPSW NUSS driver. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-05-08sysreset: enable driver support in SPL/TPLKever Yang1-0/+1
SPL/TPL also need use sysreset for some feature like panic callback. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-04-30configs: move CONFIG_SPL_TEXT_BASE to KconfigSimon Goldschmidt1-0/+1
Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing values. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-31 02:20:33 +0300