summaryrefslogtreecommitdiff
path: root/configs/j7200_evm_a72_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-09-15configs: Resync with savedefconfigTom Rini1-2/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-11configs: j72*_evm: Define the buffer sizes for dfuAswath Govindraju1-0/+2
On J721e R5 SPL, dfu buffer for loading sysfw.itb image gets allocated before DRAM gets initialized. So, the buffer gets allocated in MCU L3 RAM. The current buffer size to be allocated is 256KB and the available total heap memory is 0x70000 (448KB). This leads to NOMEM errors during allocation. In other cases when constraints such as above are not present fix the size of buffers to the sector size in OSPI for proper functioning. Also, if CONFIG_SYS_DFU_DATA_BUF_SIZE is defined and CONFIG_SYS_DFU_MAX_FILE_SIZE is not defined then the max file size for dfu transfer is defined as CONFIG_SYS_DFU_DATA_BUF_SIZE. Fix these by setting appropriate buffer sizes in their respective defconfig files and defining the max file size as 8 MB which is the default dfu buffer size. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-08-16configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-10configs: Resync with savedefconfigTom Rini1-3/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-29Merge tag 'ti-v2021.10-rc2' of ↵Tom Rini1-2/+10
https://source.denx.de/u-boot/custodians/u-boot-ti - Add MMC High speed modes for AM64 and J7200 - Add Sierra/Torrent SERDES driver - Minor clean-ups for R5F boot from SPL
2021-07-28i2c: Rename SPL/TPL_I2C_SUPPORT to I2CSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-28Rename DRIVERS_MISC_SUPPORT to DRIVERS_MISCSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename GPIO_SUPPORT to GPIOSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename SPL_POWER_SUPPORT to SPL_POWERSimon Glass1-1/+1
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-27configs: j7200_evm_a72: Add CONFIG_PREBOOT to configure ethernet PHYKishon Vijay Abraham I1-0/+1
Add CONFIG_PREBOOT to provide an automatic and easier way to configure ethernet PHY before loading the firmware. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210721155849.20994-19-kishon@ti.com
2021-07-27configs: j7200_evm_a72_defconfig: Add config for torrent serdes and common ↵Aswath Govindraju1-0/+7
clock framework Add config for torrent serdes and common clock framework. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210721155849.20994-17-kishon@ti.com
2021-07-27configs: j7200_evm_*_defconfig: Enable configs for HS400 supportAswath Govindraju1-2/+2
Enable configs to add support for HS400 speed mode. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210525093826.10390-4-a-govindraju@ti.com
2021-07-27configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-11configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-04configs: j7200_evm: Add support for UHS modesFaiz Abbas1-0/+8
Add configs to support UHS modes for the SD card and HS200 for the eMMC. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2020-11-15configs: am65/j72x: Set CONFIG_LOGLEVEL to 7Roger Quadros1-0/+1
By default CONFIG_LOGLEVEL seems to be set to 4 which is too low and doesn't show dev_info/dev_notice/dev_warn messages on console. This has been deliberately set low globally to be conservative setting across the board due to primary bootloader size limitations. It is best to tune per board config as per user needs. On K3 we have separate SPL and u-boot configs so we can afford to set u-boot CONFIG_LOGLEVEL to 7. On AM65 this patch causes u-boot.img size to change from 932KB to 940KB with 1 line additional print during MMC boot. i.e. details of Net subsystem "Net: K3 CPSW: nuss_ver: 0x6BA00102 cpsw_ver: 0x6BA80102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000" Similar 8KB difference was seen on J721E. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com>
2020-09-15configs: j7200_evm_a72: Enhance bootcmd to start remoteprocsSuman Anna1-1/+1
The A72 U-boot can support early booting of any of the Main or MCU R5F remote processors from U-boot prompt to achieve various system usecases before booting the Linux kernel. Update the default BOOTCOMMAND to provide an automatic and easier way to start various remote processors through added environment variables. Signed-off-by: Suman Anna <s-anna@ti.com>
2020-09-15configs: j7200_evm_a72: Enable R5F remoteproc driverSuman Anna1-0/+2
The J7200 SoCs has two R5F sub-systems. Enable the TI K3 R5F remoteproc driver and the remoteproc command options to allow these R5F processors to be booted from A72 U-Boot. The Kconfigs are added using savedefconfig. Signed-off-by: Suman Anna <s-anna@ti.com>
2020-09-15configs: j7200_evm_*_defconfig: Enable HyperFlash boot related configsVignesh Raghavendra1-0/+3
Enable configs required to support HyperFlash boot and detection of onboard mux switch for HyperFlash selection Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-08-27configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-11configs: j7200_evm_a72: Add Initial supportLokesh Vutla1-0/+173
Add initial A72 defconfig support. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-01 20:25:09 +0300