summaryrefslogtreecommitdiff
path: root/configs/j721s2_evm_a72_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2023-02-17configs: Resync with savedefconfigTom Rini1-8/+5
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-27configs: j721s2_evm: Enable configs to store env in MMC FAT partitionSinthu Raja1-1/+2
J721S2 EVM used to store env on eMMC, since EVM and SK uses same defconfig and there is no eMMC on SK, we need to keep env in an interface which available on both EVM and SK. So, save env in FAT partition of MMC SD Card. Enable defconfigs relevant for storing env on FAT partition of MMC. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2023-01-27configs: j721s2_evm_a72: Enable support for building multiple dtbs into FITSinthu Raja1-0/+1
Enable configs for building multiple dtbs into a single fit image and load the right dtb for next stage. Add k3-am68-sk-base-board dtb along with evm dtb inside DTB FIT image. This helps to use same defconfig for both EVM and SK Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-12-22Convert CONFIG_FLASH_SHOW_PROGRESS to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_FLASH_SHOW_PROGRESS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-10-23mtd: spi-nor-core: Rename configuration macro for S28 supportTakahiro Kuwano1-1/+1
Change configuration macro name to support all other devices in SEMPER S28 family. Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2022-10-21configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-26configs: j721s2_evm_a72_defconfig: fix the bootcmdJayesh Choudhary1-1/+1
Remove the main_cpsw0_qsgmii_phyinit variable from the boot command as there is no ethernet firmware in j721s2. Fixes: 8886341aa670 ('configs: j721s2_evm_a72_defconfig: Add A72 specific defconfig') Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
2022-08-23configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to KconfigTom Rini1-0/+2
This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_BSS_START_ADDR to KconfigTom Rini1-0/+2
This converts the following to Kconfig: CONFIG_SPL_BSS_START_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini1-0/+2
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_BSS_MAX_SIZE et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SPL_BSS_MAX_SIZE CONFIG_SPL_MAX_FOOTPRINT Note that the da850evm platforms were violating the "only use one" rule here, and so now hard-code their BSS limit. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_PAD_TO et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE CONFIG_TPL_PAD_TO CONFIG_TPL_MAX_SIZE Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the existing places. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_FS_LOAD_PAYLOAD_NAME et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FS_LOAD_KERNEL_NAME CONFIG_SPL_FS_LOAD_PAYLOAD_NAME Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-22configs: Resync with savedefconfigTom Rini1-1/+0
Resync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to KconfigTom Rini1-0/+2
This is a little tricky since SoCFPGA has code to determine this as runtime. Introduce a guard variable for platforms to select if they have a static value to use. Then for ARCH_SOCFPGA, call cm_get_qspi_controller_clk_hz() and otherwise continue the previous behavior. Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18configs: Re-run migrationsTom Rini1-0/+1
As the CI test for stopping platforms from being merged that were defining symbols that had Kconfig entries, a small number of symbols needed to be migrated again. Do so, and catch two cases the README should also have been updated but was not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-09configs: Resync with savedefconfigTom Rini1-13/+8
Rsync all defconfig files using moveconfig.py and update scripts/pylint.base Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-08configs: j721s2_evm_a72_defconfig: Add A72 specific defconfigDavid Huang1-0/+207
Enable A72 specific configs for J721S2 Signed-off-by: David Huang <d-huang@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Hari Nagalla <hnagalla@ti.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-24 16:11:07 +0300