summaryrefslogtreecommitdiff
path: root/configs/kontron_sl28_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-11-13configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-09configs: ls1028a: ensure Ethernet is enabledVladimir Oltean1-0/+1
CONFIG_FSL_ENETC is not explicitly enabled in the NXP LS1028A config files, instead it is selected by CONFIG_MSCC_FELIX_SWITCH, a state of matters which is fragile. CONFIG_MSCC_FELIX_SWITCH depends on CONFIG_DM_DSA, which depends on CONFIG_PHY_FIXED. Not all LS1028A boards did enable CONFIG_PHY_FIXED, which resulted in all of Ethernet being compiled out. This patch makes sure that CONFIG_PHY_FIXED is enabled for all LS1028A boards, and CONFIG_FSL_ENETC as well - don't rely on that fragile selection done by the Felix switch config. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09board: sl28: enable USB periheral support and gadgetsMichael Walle1-0/+5
Enable support to update the board via the DFU protocol and make it possible to export the block devices via USB mass storage protocol. This will not work out of the box, yet. You have to change the dr_mode of the usb0 controller to peripheral manually to make it work. True, OTG support will hopefully coming soon. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09board: sl28: switch to dwc3 driverMichael Walle1-1/+3
Now that the DWC3 USB driver has support for the layerscape platform, use it. This will have the benefit that peripheral mode will work. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09board: sl28: enable EFI UpdateCapsule supportMichael Walle1-0/+6
Enable support for update over EFI UpdateCapsule mechanism. This board doesn't support setting EFI variables after ExitBootservices(). Therefore, we are also enabling EFI_IGNORE_OSINDICATIONS. Signed-off-by: Michael Walle <michael@walle.cc> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09board: sl28: enable EFI_SET_TIME supportMichael Walle1-0/+1
Allow EFI to actually set the time before ExitBootServices(). Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-01configs: Resync with savedefconfigTom Rini1-2/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-16Merge tag 'v2021.10-rc4' into nextTom Rini1-1/+0
Prepare v2021.10-rc4 Signed-off-by: Tom Rini <trini@konsulko.com> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
2021-09-15configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-04ppc: Rename MPC8XXX_INIT_DDR_SUPPORT to MPC8XXX_INIT_DDRSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04spi: Rename SPI_SUPPORT to SPISimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04serial: Rename SERIAL_SUPPORT to SERIALSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-01Convert CONFIG_SYS_MALLOC_LEN to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-09-01Convert CONFIG_SYS_LOAD_ADDR to KconfigTom Rini1-0/+1
Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-09-01nxp: Migrate a number of DDR related symbols to KconfigTom Rini1-0/+2
- Guard most of the options in drivers/ddr/fsl/Kconfig with SYS_FSL_DDR || SYS_FSL_MMDC. - Migrate FSL_DMA, DDR_ECC, DDR_ECC_CMD, and ECC_INIT_VIA_DDRCONTROLLER to Kconfig. - Clean up the logic for including the DDR_ECC_CMD code. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_I2C_SET_DEFAULT_BUS_NUM et al to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_I2C_SET_DEFAULT_BUS_NUM CONFIG_I2C_DEFAULT_BUS_NUMBER Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-10configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-15board: sl28: move DM_* configs to KconfigMichael Walle1-17/+0
Move the CONFIG_DM_* from the defconfig to the TARGET_SL28 config. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-06board: sl28: enable HS400 mode againMichael Walle1-1/+1
Now that it is working reliable on the LS1028A SoC, reenable support for it. Signed-off-by: Michael Walle <michael@walle.cc>
2021-03-19board: sl28: disable HS400 modeMichael Walle1-1/+1
Since commit 8ee802f899ef ("mmc: fsl_esdhc: make sure delay chain locked for HS400") HS400 mode is unreliable on LS1028A SoCs. Some workarounds are missing for this SoC. Disable HS400 mode for now. Signed-off-by: Michael Walle <michael@walle.cc>
2021-03-02configs: Resync with savedefconfigTom Rini1-3/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-16configs: ls1028a: Enable the Ethernet switch driver in defconfigAlex Marginean1-0/+3
The switch driver for LS1028A Ethernet switch is now compiled in for the NXP LS1028A reference design boards and for the Kontron SMARC-sAL28. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Michael Walle <michael@walle.cc>
2021-02-08board: sl28: add SATA supportMichael Walle1-0/+1
Enable SATA support. Although not supported by the usual SATA pins on the SMARC baseboard connector, SATA mode is supported on a PCIe lane. This way one can use a mSATA card in a Mini PCI slot. We need to invert the received data because in this mode the polarity of the SerDes lane is swapped. Provide a fixup in board_early_init_f() for the SPL. board_early_init_f() is then not common between SPL and u-boot proper anymore, thus common.c is removed, as it just contained said function. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08board: kontron: disable flash unlock allMichael Walle1-0/+1
Although the status register is protected by the hardware write protection, there is a hardware jumper to disable that hardware write protection. Thus if a user would set this jumper any u-boot start would disable the write protection altogether. Circumvent that by not disabling the write protection in the first place. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23board: kontron: add sl28 supportMichael Walle1-0/+107
Add basic support for the Kontron SMARC-sAL28 board. This includes just the bare minimum to be able to bring up the board and boot linux. For now, the Single and Dual PHY variant is supported. Other variants will fall back to the basic variant. In particular, there is no watchdog support for now. This means that you have to disable the default watchdog, otherwise you'll end up in the recovery bootloader. See the board README for details. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-15 19:59:24 +0300