summaryrefslogtreecommitdiff
path: root/configs/octeontx2_96xx_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-12-27Convert CONFIG_ENV_SPI_BUS et al to KconfigTom Rini1-9/+0
This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE As part of this, we use Kconfig to provide the defaults now that were done in include/spi_flash.h. We also in some cases change from using CONFIG_ENV_SPI_FOO to CONFIG_SF_DEFAULT_FOO as those were the values in use anyhow as ENV was not enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-23fdt: Enable OF_HAS_PRIOR_STAGE for most boards with OF_BOARDSimon Glass1-1/+0
Use this new Kconfig instead of OF_BOARD, so we know for sure which boards obtain their devicetree from a prior stage. Leave sandbox alone since it does not. Also don't touch xilinx_versal_virt since it does not have a specific TARGET Kconfig. This option implies OF_BOARD for now, but with future work standard passage may be used instead. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add rpi_4_32b and rpi_arm64 to the list of boards converted] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-23arm: octeontx: Add an empty devicetree fileSimon Glass1-0/+1
Add an empty file to prevent build errors when building with CONFIG_OF_SEPARATE enabled. Unfortunately there are no build instructions in the U-Boot tree to enable a real file to be created. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-12Convert CONFIG_LAST_STAGE_INIT to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_LAST_STAGE_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_ENV_IS_IN_SPI_FLASH et al to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_ENV_IS_IN_SPI_FLASH CONFIG_ENV_IS_NOWHERE CONFIG_ENV_OFFSET CONFIG_ENV_OVERWRITE CONFIG_ENV_SECT_SIZE CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05Convert CONFIG_SUPPORT_EMMC_BOOT to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-01Convert CONFIG_SYS_MALLOC_LEN to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-09-01Convert CONFIG_SYS_LOAD_ADDR to KconfigTom Rini1-0/+1
Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-07-27configs: Resync with savedefconfigTom Rini1-2/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08configs: Remove unnecessary CONFIG_DM_PCI_COMPAT=yTom Rini1-1/+0
The following boards no longer need CONFIG_DM_PCI_COMPAT enabled, so remove that. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-09net: convert TFTP_TSIZE to proper Kconfig optionTero Kristo1-0/+1
TFTP transfer size can be used to re-size the TFTP progress bar on single line based on the server reported file size. The support for this has been around from 2019, but it was never converted to proper Kconfig. While adding this new Kconfig, enable it by default for OMAP2+ and K3 devices also. Signed-off-by: Tero Kristo <kristo@kernel.org>
2021-05-11configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-29arm: octeontx: Enable network support in supported boardsStefan Roese1-0/+2
Enable the now included network drivers in the currently supported Marvell Octeon TX & TX2 boards. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Suneel Garapati <sgarapati@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
2020-10-16arm: octeontx: Add CMD_WDTStefan Roese1-0/+1
Enable WDT command for Octeon TX/TX2 boards. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Suneel Garapati <sgarapati@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
2020-10-09configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-25Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini1-0/+131
- Add basic Marvell/Cavium OcteonTX/TX2 support (Suneel) - Infrastructure changes to PCI uclass to support these SoC's (Suneel) - Add PCI, MMC & watchdog driver drivers for OcteonTX/TX2 (Suneel) - Increase CONFIG_SYS_MALLOC_F_LEN for qemu-x86 (Stefan)
2020-08-25arm: octeontx2: Add support for OcteonTX2 SoC platformsSuneel Garapati1-0/+131
This patch adds support for all OcteonTX2 96xx/95xx boards from Marvell. For 96xx boards, use octeontx_96xx_defconfig and for 95xx boards, use octeontx_95xx_defconfig. Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-16 02:38:18 +0300