summaryrefslogtreecommitdiff
path: root/configs/odroid-n2_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2023-02-17configs: Resync with savedefconfigTom Rini1-3/+3
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-17ARM: meson: g12a: switch dwc2 otg to DMMattijs Korpershoek1-0/+1
With CONFIG_DM_USB_GADGET=y, we no longer need any board_usb_*() logic because: * the dwc2 driver is DM compatible, and handles its own clock enabling * the dwc3-meson-g12a glue drivers handles "force mode switching" Remove all mach-meson/g12a usb code and enable CONFIG_DM_USB_GADGET. Note: Only configs having both CONFIG_USB_DWC3_MESON_G12A=y *and* USB_GADGET_DWC2_OTG=y have been updated. Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20221024-meson-dm-usb-v1-2-2ab077a503b9@baylibre.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2022-10-31Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASESimon Glass1-1/+1
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEOSimon Glass1-1/+1
Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-23configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini1-0/+2
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini1-0/+1
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-09Convert CONFIG_REMAKE_ELF to KconfigAlper Nebi Yasak1-0/+1
This converts the following to Kconfig: CONFIG_REMAKE_ELF Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-01-25configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-07configs: amlogic: Disable CONFIG_NET_RANDOM_ETHADDR when unnecessaryNeil Armstrong1-1/+0
On Meson GXL, GXM, AXG, G12A, G12B & SM1 SoCs, we can generate an unique MAC address if none valid found in the eFuses storage. Only the GXBB based boards doesn't have a fallback way to generate an unique MAC address, so we rely on CONFIG_NET_RANDOM_ETHADDR to have a valid one. An exception is the Radxa Zero board who doesn't have Ethernet on board so depends on an (or multiple) eventual USB adapters, so leaving the CONFIG_NET_RANDOM_ETHADDR configs seems safer. Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Vyacheslav Bocharov <adeep@lexina.in> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122110710.1038893-1-narmstrong@baylibre.com
2021-09-01Convert CONFIG_SYS_LOAD_ADDR to KconfigTom Rini1-0/+1
Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-10board: amlogic: odroid-n2: fix fdtfile suffix for n2-plusChristian Hewitt1-1/+1
The N2+ dtb is meson-g12b-odroid-n2-plus.dtb, not n2_plus, so correct the suffix provided in the board file. Also align the board ident string shown during boot to match. Fixes: 8bc780106c13 ("board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variants") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-07-27configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-11configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-27configs: Resync with savedefconfigTom Rini1-3/+3
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-06configs: meson: use Designware glue driver for Amlogic Meson8b & later SoCsNeil Armstrong1-1/+1
Use the proper Synopsys DWMAC Meson8b glue to handle the ethernet link type. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06configs: update Amlogic Meson G12A, G12B & SM1 configs for MDIO MUXNeil Armstrong1-0/+3
Use DM_MDIO and the new G12A MDIO MUX driver for G12A, G12B & SM1 boards. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-02-10board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variantsMarek Szyprowski1-1/+3
Use the ADC channel 1 to check the hardware revision of the board and detect the N2 vs. N2+ and the C4 vs. HC4 variants. Each of them use different dtb file, so adjust fdtfile environment variable to the detected variant. The ADC min/max values for each variant are taken from the vendor code, adjusted to the 12-bit ADC driver operation mode (vendor code use 10-bit mode). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-18configs: migrate CONFIG_BMP_16/24/32BPP to defconfigsPatrick Delaunay1-0/+3
Done with: ./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigsPatrick Delaunay1-0/+1
Done with: ./tools/moveconfig.py VIDEO_BMP_RLE8 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-09configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-10configs: odroid-n2: update for HDMI output & USB keyboardAnand Moon1-0/+9
Enable options to permit HDMI output on Odroid-N2 G12B boards. Enable VPU Power Domain. Enable USB_KEYBOARD. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-08-10configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28configs: Resync with savedefconfigTom Rini1-1/+1
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-08board: amlogic: Add Odroid-N2 board supportPascal Vizeli1-1/+1
Add a proper Odroid-N2 board support to handle the Ethernet MAC address stored in the in-SoC eFuses. Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Anand Moon <linux.amoon@gmail.com>
2020-06-05configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22configs: Resync with savedefconfigTom Rini1-2/+2
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-21env: Finish migration of common ENV optionsTom Rini1-0/+1
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbolTom Rini1-0/+1
Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-24usb: dwc3: Kconfig: get rid of obsolete mode selectionJean-Jacques Hiblot1-0/+1
The mode selection for the DWC3 is kind of obsolete. The driver does not have to be host only or gadget only. This choice is confusing. All the remaining callers of dwc3_uboot_init() explicitly set dr_mode before calling the function, so none rely on a default behavior. Remove the choice menu and keep only the USB_DWC3_GADGET option. Enable it by default if USB_GADGET and USB_DWC3 are enabled. It must be disabled for the evb-rk3328 as it uses DWC2 for the gadget and DWC3 for the host. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-08-14configs: Resync with savedefconfigTom Rini1-11/+9
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-31board: amlogic: add support for Odroid-N2Neil Armstrong1-0/+56
ODROID-N2 is a single board computer manufactured by Hardkernel Co. Ltd with the following specifications: - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC - 4GB DDR4 SDRAM - Gigabit Ethernet - HDMI 2.1 4K/60Hz display - 40-pin GPIO header - 4 x USB 3.0 Host, 1 x USB OTG - eMMC, microSD - Infrared receiver The board directory is W400, the name of the Amlogic Reference Design of Amlogic G12B with Gigabit boards, which will be used for similar boards. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-24 10:35:56 +0300